Monday, November 18, 2013
2001 Dodge Stratus Alignment Specs
Introduced in 1995, the Stratus is a four-door mid-sized sedan manufactured by Dodge. All Stratus models require periodic adjustment, often referred to as "alignment." The factory specifications for the alignment are the same for all 2001 Stratus models. These specifications apply to a vehicle at curb height with one-half tank of fuel.
Camber
Measured in degrees, camber represents the outward or inward tilt of the wheel in relation to the center of the vehicle. The Accord camber angle should be the same on both left and right wheels. Camber angles must be +0.1 degrees with the measuring accuracy of 0.6 degrees on the front wheels and -0.1 degrees with the measuring accuracy of 0.4 degrees on the rear wheels.
Caster
Caster represents both the rearward and the forward tilt of the steering knuckle from the true vertical. Caster is the measurement in angles that is responsible for directional stability. The Stratus caster angle should be the same on both rear and front wheels. The angle must be +3.1 degrees, with the maximum allowable difference of 1.0 degree.
Toe
Toe represents the difference between the leading and trailing inside edges of the front wheels. Total toe acceptable angle is +0.1 degrees with the maximum allowable difference of 0.2 degrees.
No comments:
Post a Comment