Showing posts with label oil. Show all posts
Showing posts with label oil. Show all posts

Wednesday, October 15, 2014

How to Reset the Change Oil Light on a 2005 Chevrolet Monte Carlo

Occasionally, even after changing the engine oil on your 2005 Monte Carlo, the "Change Oil" light will still stay on. If this occurs, you must reset the light manually through one of two methods. The first method involves the accelerator pedal, and the second involves the radio. If you have an aftermarket radio, you will not be able to perform the second method.

Instructions

Accelerator Method

    1

    Turn the Monte Carlos engine off. Leave the keys in the ignition in the "Run" position.

    2

    Press and release the accelerator pedal three times within five seconds. The "Change Oil" light will flash twice and then turn off.

    3

    Repeat this procedure if it did not work the first time. The accelerator pedal must be fully pressed and released each time, and it must be completed three times within five seconds.

Radio Method

    4

    Turn the Monte Carlos engine off. Leave the keys in the ignition in the "Run" position.

    5

    Press and hold the "TUNE" button for five seconds. "SETTINGS" will now appear on the radio display.

    6

    Press the "SEEK P-TYPE" button to scroll through the options on the display. Stop when "OIL LIFE" is displayed.

    7

    Press the "1 PREV" button to scroll through the sub-menu. When "RESET" is displayed, press the "TUNE" button to confirm. A beep will emit from the speakers, confirming the reset procedure. "DONE" will appear on the display.

    8

    Press the "TUNE" button to exit the program. One more beep will be heard to confirm the exit.

Read More.. >

Sunday, May 11, 2014

How to Install a Jeep Power Tech 2 4L Oil Pump

Chrysler has used the PowerTech brand for a variety of unrelated engines. One type of PowerTech engine is a four-cylinder 2.4-liter engine that appeared in the Jeep Liberty from 2002 to 2005. The oil pump on this vehicle circulates oil throughout the engine to provide lubrication for its moving parts. The Jeep PowerTech 2.4-liter engine has its oil pump on the crankshaft sprocket in front of the engine.

Instructions

    1

    Remove the cable from the negative terminal of the battery with a socket wrench. Disconnect the rear cover of the timing belt and loosen the timing belt tensioner. Detach the timing belt.

    2

    Disconnect the mounting bolts for the oil pan with a socket wrench. Remove the oil pan from the engine.

    3

    Remove the crankshaft sprocket with Special Tool 6793 and Special Tool C-4685-C2. Disconnect the crankshaft key with a socket wrench and detach the oil pick-up tube from the oil pump. Remove the oil pump and the crankshaft seal from the crankshaft sprocket. Discard the crankshaft seal.

    4

    Clean the mounting surfaces for the new oil pump with a shop rag and apply gasket sealer to the mounting surfaces. Install the O-ring into the discharge passage of the oil pump. Fill the oil pump with engine oil to prime it.

    5

    Align the rotor flats of the oil pump with the crankshaft flats. Install the oil pump to the block with a new crankshaft seal. Connect the crankshaft key with a socket wrench. Install the crankshaft sprocket with Special Tool 6792 to set the sprocket to the original depth.

    6

    Connect the oil pump pick-up tube to the oil pump. Mount the oil pan and fasten the mounting bolts with a socket wrench. Install the timing belt and connect the rear cover for the timing belt with a socket wrench.

Read More.. >

Thursday, May 8, 2014

How to Install a Jagg Oil Cooler XL

How to Install a Jagg Oil Cooler XL

Since Harley-Davidson Sportster engines are air-cooled, their three quarts of oil can get very hot in the summertime, especially in desert conditions. Very hot oil is both less slippery and more easily saturated with carbon and other wastes than merely hot oil. Oil coolers increase the volume of oil circulating in the engine and improve the radiation of excess heat away from the engine. A Sportster XL requires a Jagg Slimline Oil Cooler kit. If your Sportster is a 2004 or later model you must also buy a Jagg 4400 Oil Filter Adapter.

Instructions

    1

    Ride the motorcycle for 30 miles until the oil gets as hot as possible. Park the bike and put on a pair of mechanics gloves.

    2

    Loosen the hose clamp on the oil drain line with a flat-head screwdriver. Pull the plug out of the end of the drain line with a pair of pliers drain the hot oil from the tank into a drain pan.

    3

    Re-plug, tighten and replace the oil drain line. Position the drain pan under the oil filter on the right front of the bike.

    4

    Loosen the oil filter with an oil filter wrench. Remove the filter by hand and dump as much of the oil as possible into the drain pan. Mop the spilled oil off the front of the bike with rags. Remove the gloves.

    5

    Cut two pieces of standard oil line, with an inside diameter of 3/8-inch and an outside diameter of 5/8-inch, approximately 18 inches long with a sharp knife. The lines must be long enough to extend from the oil filter to the middle of the left down tube.

    6

    Slip one end of each of the two new oil lines onto the Jagg oil filter adapter nipples. Tighten the lines to the nipples with two of the hose clamps included with the adapter kit and a flat-head screwdriver.

    7

    Position the O-ring included with the kit on the oil filter adapter. Slide the oil filter adapter and O-ring onto the oil filter mounting stud.

    8

    Spin the adapter anchor nut onto the oil filter stud and tighten with a 1-inch hex socket, socket extension and socket wrench.

    9

    Spin the banjo fitting included with the kit onto the oil filter stud. Spin a new oil filter onto the oil filter stud and hand tighten.

    10

    Attach the 1/16-inch rubber shims and the 1-1/8-inch clamps included in the oil cooler kit to the left down tube. Attach the oil cooler to the clamps with its nipples down and the cooling fins facing forward, using the supplied nuts and bolts, hex socket and socket wrench.

    11

    Attach the two oil lines from the oil filter adapter to the two nipples on the bottom of the oil cooler using the hose clamps included with the oil cooler kit and a flat-head screwdriver.

    12

    Pour three quarts of oil into the oil tank. Start the engine in neutral and run for one minute.

    13

    Check for oil leaks while the bike is running. Turn off the engine and check the oil level in the oil tank with the dipstick. It should be about one quart low.

    14

    Add oil to the oil tank as needed. Restart the engine in neutral and run for at least five minutes. Check for leaks while the motorcycle is running. Make sure the oil cooler becomes warm.

Read More.. >

Thursday, April 17, 2014

What Is Transaxle Oil

The transaxle is an automobile component that makes up the transmission and the differential gear. It is found in most front-wheel-drive cars and trucks. The components require lubrication in order to work properly.

Transaxle Oil

    The type of transaxle oil used in your car depends on its make, model and manufacturers specifications. The American Petroleum Institute has specific fluid and oil service designations for your car. Manual transmissions use transaxle oil with a viscosity of about SAE 80W or 90 grade. The gear oil viscosity is unrelated to motor oil viscosity.

Protecting Your Automobile

    It is important that you check and change the transaxle oil on a regular basis. Failure to do so can result in a costly transmission repair or replacement. It is also important that you use the transaxle oil specifically designed for your automobile. Consult your owners manual or consult a certified automobile mechanic for more information.

Troubleshooting

    Transaxle oil that is dark-brown or black should be changed immediately. Also, oil that contains any debris or smells as if it is burning or burnt requires changing to protect the components of the transaxle. The continued use of degraded oil or operating your car with little to no transaxle oil may cause difficulty with gear-shifting or may cause complete transmission failure.

Read More.. >

Friday, April 11, 2014

Oil Types for Hondas

Oil Types for Hondas

Honda manufactures many different types of engines for its cars and vehicles, lawn mowers and power tools. Whichever type of Honda engine you have, its important to use the proper oil to get the best performance and the longest life from your engine.

Water Vehicles

    For outboard motors and other water vehicle engines, Honda has a certified 10W-30 motor oil that is available through Honda Marine dealers. The oil is specifically designed to provide lubrication for four-cylinder, water-cooled engines. Honda recommends this oil for its marine motors because it helps fight corrosion, reduce rust and improves performance at high temperatures.

Automotive Engines

    For Honda cars, Honda dealers carry a specific oil recommended by Honda. The oil comes in a semi-synthetic version and a mineral-based version. The semi-synthetic oil is a 15W-40 oil and is good for any Honda car engine. The mineral-based version is a 10W-30 oil and is also a good option for Honda cars. If your Honda-recommended oil isnt available, talk to your dealer about the best choice for your Honda.

Small Power Engines

    Whether you have a lawn mower with a Honda mower or another small power tool that uses a Honda engine, its important to review your owners manual when selecting the oil for your engine. Small Honda engines are designed to use petroleum-based oil, so avoid synthetic oils. Otherwise, make sure that the oil you choose meets all of the recommendations listed in your manual.

Read More.. >

Monday, February 17, 2014

King Quad 300 Oil Specs

King Quad 300 Oil Specs

The King Quad 300 is a popular "quad" off-road vehicle from Suzuki. It features a 280cc single cylinder, four-stroke engine and a five-speed manual transmission. It is 4-wheel and 2-wheel drive, depending on how you set it, and comes with dual hydraulic breaks. Like an four-stroke engine, it requires regular oil changes. You do not mix the oil with the gasoline on this quad.

Capacity

    The King Quad 300 holds 3500 ml or 3.7 quarts of oil. It will take slightly more, 100 ml more, if the oil filter is also changed.

Location

    The oil for the transmission and the transmission pull from the same well, which is accessed in front of the rear wheel on the right side.

Type

    Any weight motor oil will work with the King Quad 300. Typically you may want to consider a lighter weight oil in the summer months and a heavier oil in the winter.

Read More.. >

Tuesday, January 28, 2014

How to Install the Oil Sending Unit in a 2001 Mercury Sable

Mercurys 2001 Sable uses an oil pressure sending unit mounted in an oil galley in the engine block to detect oil pressure within the engine. The sending unit in the 3.0-liter engine is a normally-closed switch that completes the low oil pressure warning lamp circuit to ground and illuminating the lamp when there is insufficient oil pressure. When oil pressure within the galley reaches the specified pressure, the switch opens and interrupts the low oil pressure lamp ground circuit, turning the lamp off. Illumination of the low oil pressure lamp can indicate a bad sending unit, bad connection at the sending unit wire, or a more serious condition within the engine that is lowering the oil pressure.

Instructions

Overhead Valve 3.0-Liter Engine

    1

    Locate the oil sending unit on the rear left side of the engine block above the flywheel. Disconnect the oil sending unit electrical connector.

    2

    Remove the oil sending unit, using a ratchet and socket.

    3

    Wrap the threads on the new oil sending unit with Teflon tape, or equivalent electrically conductive sealer. Make certain the tape does not cover the end of the oil sending units sensor that penetrates the engine oil galley.

    4

    Thread the new oil sending unit into the engine block. Tighten the sensor to 14 foot-pounds, using a foot-pound torque wrench and socket. Connect the oil sending unit electrical connector.

    5

    Start the engine. Make certain the low oil pressure warning lamp on the dash instrument cluster goes off after the engine starts. Allow the engine to reach normal operating temperature and check the sending unit for leaks.

Dual Overhead Cam 3.0-Liter Engine

    6

    Park the vehicle on firm, level ground. Engage the parking brake. Raise the vehicle using a jack and support it on jack stands. Chock the rear wheels.

    7

    Locate the oil sending unit on the left side of the engine above the oil filter. Disconnect the oil sending unit electrical connector.

    8

    Hold the adapter pipe in the engine block in place using an open-end wrench. Remove the oil sending unit from the adapter pipe, using a ratchet and socket.

    9

    Wrap the threads on the new oil sending unit with Teflon tape, or equivalent electrically conductive sealer. Make certain the tape does not cover the end of the oil sending units sensor that penetrates the engine oil galley.

    10

    Thread the new oil sending unit into the adapter pipe. While holding the adapter pipe in place with the wrench, tighten the oil sending unit to 10 foot-pounds, using a foot-pound torque wrench and socket.

    11

    Connect the oil sending unit electrical connector.

    12

    Raise the Sable with the jack, and then remove jack stands. Lower the vehicle to the ground.

    13

    Start the engine. Make certain the low oil pressure warning lamp on the dash instrument cluster goes off after the engine starts. Allow the engine to reach normal operating temperature and check the sending unit for leaks.

Read More.. >

Tuesday, November 26, 2013

How to Filter Oil Additives

How to Filter Oil Additives

Every car has to have its oil changed every three to five thousand miles. This can be an expensive addition to already expensive operating costs for drivers. If you want to cut down on your automotive bills, you can filter the additives from used oil in order to reuse the oil in your car. This is not a very hard task to perform. You can do it with just a few items found around the house.

Instructions

    1

    Put a 5-gallon bucket on top of a shelf. Place another 5 gallon bucket on the shelf below it.

    2

    Measure enough rope to reach from the bottom of the top bucket to the bottom of the bottom bucket. Cut the rope and then cut a hole with the same diameter of the rope in the bottom of the top bucket. Drill a hole in the shelf the same diameter of the rope so it can feed into the bottom bucket.

    3

    Feed the rope from the bottom of the top bucket down through the shelf and into the bottom bucket. Secure the rope to the top bucket with a staple or a nail.

    4

    Pour your old oil into the top of the bucket. As the oil seeps down the rope into the bottom bucket, the additives will stick to the rope, cleaning the oil in the process. Wrap the entire shelf in plastic sheeting to secure it from foreign objects.

    5

    Wait for 3-4 weeks for the oil to filtrate. Remove the sheeting and then pour the filter oil into the oil containers for storage. Mix the 3 parts filtered oil with 1 part new oil for use.

Read More.. >

Wednesday, November 20, 2013

Is There Oil in a CV Joint

Is There Oil in a CV Joint?

A CV joint is a flexible joint that transfers power to an automobiles wheel from the transmission. The CV joint is a collection of bearings that must be lubricated to resist wear to this vital part.

Lubrication Importance

    The CV joints various moving parts are subject to large amounts of stress due to the automobiles movement. This stress can cause the part to wear prematurely, which can cause an expensive repair and present a safety hazard if the joint fails while driving.

Oil in CV Joint

    Oil is not used as a lubricant for a CV joint in normal applications. The primary reason that oil is not used in CV joints is that the open bearings in the joint will not hold oil and the oil would simply drain away from the joint.

CV Joint Lubricant

    Grease is used to lubricate CV joints, since grease will stay on open bearings and not simply drain from the area. The CV joint is covered with a rubber boot that prevents the grease from picking up outside contaminants and causing undue wear.

Read More.. >

Saturday, November 9, 2013

Ford 2 0L Oil Pressure Valve Location

The 2.0-liter Duratec four-cylinder engine is found in many popular Ford vehicles, including the Ford Focus. The oil pressure valve, also known as the oil pressure sender or oil pressure switch, is an important component of the engine control system. Proper functioning of the valve is necessary for the vehicle to run correctly as well as emissions inspection purposes. You can easily check and replace the valve if necessary.

Instructions

    1

    Raise the vehicle with a floor jack. Position jack stands under the jacking points on the frame for support. Never work on a vehicle supported only by a floor jack!

    2

    Locate the oil filter on the side of the engine closest to the front of the vehicle.

    3

    Locate the oil pressure valve on the drivers side of the oil filter bracket on the engine. It can be identified by the electrical connector plugged into it.

Read More.. >

Tuesday, November 5, 2013

How to Install an Oil Cooler in a Sportster

Oil coolers are a practical addition for riders who put many miles on their Sportsters or who live in hot climates. Oil coolers for modern Sportsters bolt to one or both of the front down tubes of your motorcycle, and two hoses connect the cooler to your oil supply. An oil cooler supply line connects the oil pump to the cooler, and an oil cooler return line connects the cooler to the crankcase. At least a dozen companies sell these accessories. Harley-Davidson sells and recommends its own brand of Sportster oil cooler, the kit number for which is 62996-07.

Instructions

    1

    Free the drain hose from the boss on the frame below the battery box. Loosen the hose clamp on the drain hose. Remove the drain plug with pliers.

    2

    Drain the motor oil into a drain pan. Reseal and replace the drain hose.

    3

    Loosen the oil filter with an oil filter wrench. Carefully remove the filter by hand. Clean up spilled oil with paper towels.

    4

    Remove the oil feed line and fitting from the oil pump with open-end wrenches. Remove the existing oil return line and fitting from the crankcase.

    5

    Apply Hylomar Gasket and Thread Sealant (which Harley recommends) or the equivalent to the replacement oil pump and crankcase fittings included with your oil cooler kit. Attach the fittings to the oil pump and crankcase. Tighten the fittings to 60 inch-pounds with a torque wrench.

    6

    Attach but do not tighten the oil cooler return hose to the crankcase fitting and the cooler supply hose to the oil pump fitting.

    7

    Remove the clutch cable and wire harness clips from the frames left down tube behind the forks. Install the oil cooler clamps that came with your kit in the same spot.

    8

    Attach but do not tighten the oil cooler to the cooler clamps, using the Allen bolts and hex nuts that came with your oil cooler.

    9

    Attach the oil cooler hose from your oil pump to the rightmost fitting on the bottom of your new cooler. Secure the hose by tightening the hose clamp with a screwdriver.

    10

    Attach the oil cooler hose already attached to your crankcase to the leftmost fitting on the bottom of your oil cooler. It also attaches with a hose clamp and screwdriver.

    11

    Arrange the oil cooler so it faces forward. Check for hose kinks. Tighten the cooler clamp screws with a torque wrench to 30 inch-pounds.

    12

    Tighten the hose fittings with a torque wrench to 20 foot-pounds. Reattach the clutch cable and wiring harness to the clips on the cooler clamps.

    13

    Hand-tighten a new oil filter to the oil filter stud. Add four quarts of motorcycle motor oil to the oil tank.

    14

    Start the motorcycle and allow it to run in neutral until the engine is warm. With the engine running, examine all fittings for leaks. Touch the oil cooler to ensure that it becomes warm.

    15

    Turn off the engine. Allow the bike to cool, then retighten all fasteners.

    16

    Check the oil level with the dipstick. Add oil as necessary.

Read More.. >

Wednesday, October 30, 2013

Recommended Air Compressor Oil

Recommended Air Compressor Oil

Like most machines with motors, lubrication is needed to ensure a long product life and guarantee day-to-day functionality. With a diverse array of oils on the market, it can be easy to get confused about which type of oil you need for your air compressor.

Manufacturer Recommended Oil

    The first place to check when trying to find out which oil is best for your air compressor is with the manufacturers recommendation. New compressors come with user manuals. If you have a used air compressor or your user manual does not recommend a specific type of oil, contact the manufacturer with your question.

Synthetic Compressor Oil

    These days, most oil manufacturers have synthetic options available for air compressors. In fact, synthetics are usually recommended for compressors that are run for extended periods of time. Most synthetic oil manufacturers have a list of air compressor models their different synthetics work with best.

Regular Compressor Oil

    If you dont feel like you need a synthetic oil for your air compressor, standard 20 weight and 30 weight oils should work just fine. Just make sure that whichever air compressor oil you choose, however, is nondetergent and nonflammable. The 20 and 30 weight options should be able to maintain viscosity in most air compressor applications. If you run at very high temperatures, however, you may want a 40 or 50 weight option.

Read More.. >

Wednesday, October 9, 2013

How to Install an Oil Pump in a 6 5 Turbo Diesel

General Motors manufactured a 6.5-liter diesel engine from 1992 to 1999. It typically had a turbocharger and was most common in heavy trucks made by General Motors during this period. The purpose of the oil pump is to lubricate the moving parts by circulating oil through the engine. The oil pump on the General Motors 6.5-liter turbo diesel engine is under the engine, and is part of the oil pan assembly.

Instructions

    1

    Raise the vehicle and support it on jack stands. Place a drain pan under the drain hole in the crankcase. Remove the drain plug with a socket wrench, and let the oil drain into the pan. Replace the drain plug.

    2

    Rotate the crankshaft manually so that the No. 1 and No. 2 connecting rods are in the up position. Remove the mounting bolts for the oil pan with a socket wrench. Lower the oil pump to gain access to the fuel pump.

    3

    Disconnect the mounting bolts for the oil pump with a socket wrench. Allow the oil pump and its extension shaft to fall into the oil pan. Detach the pan from the vehicle.

    4

    Mount the new oil pump into position on the main bearing cap. Align the extension shaft with the oil pump drive and push the pump into place. Fasten the mounting bolts for the oil pump and tighten them to 65 ft. lbs. with a torque wrench.

    5

    Install the oil pan with a socket wrench and lower the vehicle. Fill the engine with oil. Start the engine and correct any oil leaks.

Read More.. >

Tuesday, October 8, 2013

How to Assemble a Harley Oil Tank Hose

How to Assemble a Harley Oil Tank Hose

There are only four possible oil hoses on any Harley-Davidson. One hose, usually called the "feeder line," carries oil from the oil tank to the oil pump. Another hose, usually called the "return line," carries oil from the engine to the oil tank. Harleys built after 1992 have a third line, usually called a "vent line," that connects the oil tank and crankcase. All Harleys have a way to drain the oil from the tank (sometimes it is a "drain line" and at other times a "drain-feed" line). All connections are straightforward and are made with either hose clamps or hex nuts.

Instructions

    1

    Drain oil from the oil tank through a drain hose by loosening a hose clamp at one end of the hose with a flat-head screwdriver. Turning the screw causes the clamp to expand or contract. Pull the drain plug from the end of the hose when the clamp is loose.

    2

    Loosen the hose clamps that connect oil hoses to possible T-fittings and elbow fittings by loosening the hose clamps there with a flat-head screwdriver. The hose clamp tightens the flexible hose to ridged metal connections on the fitting. When the clamp is loose pull the hose free.

    3

    Loosen the hose clamp connection between the oil tank and the feeder line with a screwdriver. Tighten the connection between the feeder line and the fixed, threaded, oil pump fitting with an open-end wrench.

    4

    Push the oil vent and oil return lines through the rubber grommets in the holes near the top front of the oil tank.

    5

    Connect the crankcase end of the oil vent line to the fixed, threaded, crankcase fitting with an open-end wrench. Connect the oil pump end of the return line to the fixed, threaded, oil pump fitting with an open-end wrench.

Read More.. >

Thursday, October 3, 2013

How to Replace the Oil Pump in a 1993 Ford Explorer

How to Replace the Oil Pump in a 1993 Ford Explorer

The oil pump in the 1993 Ford Explorer is a sump pump. This means the pump submerges into the oil in the oil pan and the pump pushes oil to the engine. This is a lot of work for a small pump. Over time, the pump weakens and the engine does not get the oil it needs to run properly. If this happens, you must replace the oil pump. Unfortunately, this task is labor intensive because you must remove the oil pan to get to the pump.

Instructions

    1

    Drive the Ford Explorer onto a set of ramps. Shut off the engine and set the parking brake for safety.

    2

    Open the engine hood and remove the oil filler cap and oil dipstick.

    3

    Place a drain pan under the oil pan drain plug and remove the plug using a socket and ratchet. Drain the oil into the drain pan and then insert the drain plug and tighten it.

    4

    Remove the bolts that secure the oil pan to the bottom of the engine block, using your socket and ratchet. Pry the pan free from the block using a metal scraper and then pull the pan out from under the Explorer.

    5

    Unplug the wiring harness connected to the oil pump.

    6

    Remove the jam nut that secures the oil pump to the oil pickup tube using an adjustable wrench. Turn the pump counterclockwise to remove it from the oil pickup tube.

    7

    Thread the new oil pump onto the oil pickup tube and tighten it using the jam nut and the adjustable wrench.

    8

    Plug the wiring harness back into the oil pump.

    9

    Scrape the old gasket material off the mating surfaces of the engine block and the oil pan. Wipe any old oil off the mating surfaces using a clean shop towel.

    10

    Place the gasket onto the mating surface of the oil pan, place the oil pan against the bottom of the engine block and, using the socket and ratchet, secure the pan to the block. Tighten the bolts in an alternating pattern from side to side.

    11

    Place a funnel into the oil filler spout and pour four quarts of oil into the engine.

    12

    Release the parking brake and drive the Ford off the ramps onto level ground. Shut off the engine and let it cool. Using the oil dipstick, check the oil level and add oil as needed. Replace the dipstick and filler cap.

Read More.. >

Wednesday, October 2, 2013

What Happens if the Oil Pan Gasket Goes

What Happens if the Oil Pan Gasket Goes?

An oil pan gasket is a flexible gasket that seals the oil pan to prevent oil from leaking. Oil pan gaskets rarely fail, but damage can occur to the oil pan, which may cause the gasket to leak.

Gasket Failure

    When an oil pan gasket fails, oil will begin to leak from the oil pan. Car owners may notice oil spots in places where the car was parked. The most serious problem caused by a leaking oil pan gasket is the loss of oil.

Determining Leak Location

    Oil may leak from a number of areas on an automobile. When oil leaks, it will run down the motor and may appear to be leaking from the oil pan. Before replacing the oil pan gasket, car owners should clean the engine and oil pan to determine the actual source of the leak.

Gasket Replacement

    Replacing an oil pan gasket is not difficult, but it is messy. The oil should be drained from the car before replacing the gasket, but some oil will still remain in the pan and will drip from the engine. A model-specific repair manual is a useful resource for determining the steps to remove the oil pan.

Read More.. >