Wednesday, October 15, 2014
How to Reset the Change Oil Light on a 2005 Chevrolet Monte Carlo
Occasionally, even after changing the engine oil on your 2005 Monte Carlo, the "Change Oil" light will still stay on. If this occurs, you must reset the light manually through one of two methods. The first method involves the accelerator pedal, and the second involves the radio. If you have an aftermarket radio, you will not be able to perform the second method.
Instructions
Accelerator Method
- 1
Turn the Monte Carlos engine off. Leave the keys in the ignition in the "Run" position.
2Press and release the accelerator pedal three times within five seconds. The "Change Oil" light will flash twice and then turn off.
3Repeat this procedure if it did not work the first time. The accelerator pedal must be fully pressed and released each time, and it must be completed three times within five seconds.
Radio Method
- 4
Turn the Monte Carlos engine off. Leave the keys in the ignition in the "Run" position.
5Press and hold the "TUNE" button for five seconds. "SETTINGS" will now appear on the radio display.
6Press the "SEEK P-TYPE" button to scroll through the options on the display. Stop when "OIL LIFE" is displayed.
7Press the "1 PREV" button to scroll through the sub-menu. When "RESET" is displayed, press the "TUNE" button to confirm. A beep will emit from the speakers, confirming the reset procedure. "DONE" will appear on the display.
8Press the "TUNE" button to exit the program. One more beep will be heard to confirm the exit.
Friday, June 6, 2014
How to Troubleshoot a 95 Ci 2005 Harley Davidson
Harley Davidsons original compensator on 95-cubic-inch and larger twin cams may have been inadequate for the added torque produced by the newer engine. Harley now factory installs more robust compensators. There are sometimes electronic problems with fuel injected Harleys that can be difficult to diagnose. The usual procedure for that is to retrieve and translate the trouble codes. Beyond that, troubleshooting a 95-cubic-inch twin cam is not very different from troubleshooting a flathead 45. The process always begins with throwing your leg over the bike and sitting down.
Instructions
- 1
Open the petcock and extend the choke. Turn the ignition key switch to "On," the handlebar run switch to "On" and start the motorcycle. If the starter does not operate, your battery is dead.
2Shake the motorcycle from side to side and listen for gas sloshing in the fuel tank. If you hear sloshing and the starter turns over, but the bike does not start, check the spark plugs, the plug wires and the coil.
3Inspect the spark plug wires for breaks, wear and corrosion from the coil to the plugs. Remove the front spark plug with a socket wrench and a spark plug socket and inspect the plug. If you see anything other than a perfectly intact plug with a light gray or tan coating on the electrodes, your spark plug must be replaced.
4Start the motorcycle and idle in neutral until the rocker box covers under your left hand are warm to the touch. Ride the motorcycle.
5Listen as you ride. If you hear knocks or pings and your spark plugs are in good shape then the gasoline in your fuel tank is bad. If you hear a typewriter chattering either your pushrods or your tappets are improperly adjusted. If you hear a squeal when you stopped your brakes are worn out.
6Change gears. If the bike shifts hard, the shifter rod on the lower left side of the motorcycle may be bent. If the transmission jumps out of gear, the shifter forks in the transmission are improperly adjusted.
7Brake to a stop. If the brakes do not hold, the brake fluid in your master cylinder is low.
Sunday, March 23, 2014
How to Replace the Timing Belt on a 2005 KIA Spectra
The Kia Spectra is a compact car produced from 2000 to 2009. The second generation of this series includes the 2004 through 2009 models, and represents a major redesign over the first generation Kia. The only engine available for the 2005 Kia in North American is a four-cylinder 2.0-liter engine with a double overhead camshaft. This design uses a timing belt to drive the camshafts with the crankshaft. The most important part of replacing the timing belt is keeping the crankshaft and camshafts in the correct position during the procedure.
Instructions
- 1
Disconnect the cable from the negative battery terminal with a socket wrench to ensure you dont inadvertently start the engine. Raise the vehicle and support it on jack stands. Remove the engine cover, right wheel and side cover for the right wheel. Detach the accessory drive belts, water pump pulley and upper cover for the timing belt.
2Turn the crankshaft pulley clockwise to align the groove on the pulley with the timing mark on the lower timing belt cover. Disconnect the pulley and flange for the crankshaft with a socket wrench. Remove the lower timing belt cover and timing belt tensioner. Detach the timing belt from the pulleys.
3Turn the crankshaft clockwise to align the timing marks for the crankshaft and camshaft. Install the timing belt tensioner with a socket wrench. Place the new timing belt onto the crankshaft sprocket, idler pulley, camshaft sprockets and timing belt tensioner in that order.
4Turn the timing belt tensioner clockwise to apply tension to the timing belt. Press the tension side of the timing belt with moderate force. The tension is correct when the deflection of the timing belt is about 0.2 in. Tighten the mounting bolts for the tensioner to 20 ft. lbs. with a torque wrench. Turn the crankshaft clockwise by two full turns and align the timing marks once again.
5Attach the lower timing belt cover and tighten its mounting bolts to between six and seven ft. lbs. with a torque wrench. Connect the flange and pulley for the crankshaft. Tighten the bolt for the crankshaft pulley to between 123 and 130 ft. lbs. Connect the upper timing belt cover and tighten the mounting bolts to between six and seven ft. lbs.
6Install the water pump pulley and accessory drive belts with a socket wrench. Attach the right wheel and side cover for the right wheel. Replace the engine cover and connect the cable to the negative battery terminal with a socket wrench.
Tuesday, February 25, 2014
How to Program a Key for a 2005 Ford Ranger
The Ford Ranger is one of a fleet of Ford cars that makes use of ignition key technology. These keys can be programmed to sync with your engine and will forever be linked to your car.
So long as you have two pre-programmed keys, it is simple to create more keys that will work in your car. There is no limit to how many you can have.
Instructions
- 1
Step into your 2005 Ford Ranger with your two programmed keys and your blank.
2Insert a programmed key into the ignition. Turn to "On" then to "Off" and then remove the key.
3Insert your second key. Turn it to "On" then to "Off" and remove. This must be done within five seconds of the first key.
4Insert the blank key into the ignition. Again, turn this to "On," hold for one second and then turn it to "Off." This must be done within 10 seconds of the first key. The security light will flash if the procedure has been successful.
Thursday, February 20, 2014
How to Detect Bad Struts in a 2005 Buick LaCrosse
As vehicles age, many components wear out, and struts are no exception to this rule. Each time that you drive your vehicle, the struts are moving up and down many times per second to absorb road vibrations. This constant movement, along with certain environmental factors, causes the struts to wear out. The most common symptom of bad struts is a noticeably rough ride, especially when going over bumps or uneven pavement. In addition to noticing the ride, there are other ways that you can detect bad struts in your vehicle.
Instructions
- 1
Test drive your vehicle on the side streets as well as the highway. Purposely drive over bumps, cracks, and uneven spots in the road and take note of the vehicles reaction to these irregularities. In a vehicle with bad struts, youll notice a harsh, jarring ride when going over the bad spots in the pavement. In a vehicle with good struts, the rebound will be smooth, controlled and feel tight, as opposed to sloppy, harsh, and loud.
2Press down quickly on the vehicles bumper with two hands, and then let it up. The vehicle should lift back to its normal height without excessive rebound, or bouncing. If the vehicle bounces and reverberates, the struts are likely bad. This is because the struts are designed to minimize the rebound vibrations from the springs.
3Look at the odometer and note the vehicles mileage. The performance of most vehicle struts greatly diminishes after about 60,000 miles. If youve got more mileage than that on your car and the struts are original, its a good time to replace them.
4Inspect your tires for uneven wear. Faulty struts allow tires to wear unevenly, causing cupping. Cupping ers to the tires having intermittent, parallel worn spots across the tire, creating high and low spots on the tire.
5Lift the vehicle with an automotive jack and then support it with jack stands. Place wheel chocks behind the opposing wheels. Shine a work light up under the wheel well and look at the strut cartridge or tube; it should be dry with no signs of fluid leakage. Most modern struts are gas charged and also contain hydraulic fluid. When struts age, their seals begin to leak this fluid. Once the fluid begins to leak, the strut is already ruined and its performance is dramatically decreased.
Monday, February 3, 2014
How to Remove the Back Seat on a 2005 Acura RL
The Acura RL was introduced to replace the Acura Legend. Both cars are luxury models produced by Japanese automaker Honda. The RL designation stands for "Road Luxury." If you decide that you want to remove the back seat on your 2005 Acura RL, you can do so in your home garage and save yourself some time and money. Maybe youd like to have the carpet cleaned or you are reupholstering or replacing the seat. In any case, it will take you about 30 minutes to complete this task, and you will need only one tool that can be purchased from any auto parts or hardware store.
Instructions
- 1
Move the front seats as far forward as possible. Open all the doors.
2Separate the crevice between the seat back and the seat cushion with your hands to locate the bolt that holds the seat cushions in place. Remove this bolt with a socket wrench.
3Pull the latches under the seat cushion forward and remove the seat cushion.
4Locate the three bolts under each seat back and remove with a socket wrench. Remove the two bolts under each headrest with a socket wrench.
5Pull the seat back forward and lift it out of the side door of your Acura.
Sunday, February 2, 2014
How to Replace the Rear Oxygen Sensor on a 2005 Nissan Altima
The 2005 Nissan Altima exhaust system includes two oxygen sensors. The upstream sensor is located near the exhaust manifold at the front of the exhaust system. The downstream sensor is located near the catalytic converter, further along the exhaust pipe. When a sensor fails, your "Check Engine" light will illuminate. If the "Check Engine" light is on and you notice a decrease in your fuel mileage, an oxygen sensor is the likely problem. Buy a replacement sensor from an auto-parts counter and change it at home in minutes.
Instructions
- 1
Lift the Altima using a jack until it is high enough to fit a set of jack stands under. Rest the car on the jack stands.
2Locate the downstream oxygen sensor threaded into the exhaust pipe, approximately halfway down the car, below the center console area. Press the tab on the electrical connection while you pull the connectors apart to disconnect it.
3Remove the sensor with a wrench or ratchet fitted with an oxygen sensor socket. Coat the new sensors threads with anti-seize compound, then hand-thread the sensor into the pipe.
4Push the electrical connection together until it clicks. Remove the jack stands by lifting the car slightly with the jack. Lower the Altima to the ground.
Thursday, December 12, 2013
How to Reset the Air Bag Light on a 2005 Frontier
You can reset the air bag light on your 2005 Frontier right from your home garage in just a few moments. When the SRS, or air bag, light illuminates on the instrument panel, it means there is a malfunction in the air bag system that needs to be looked at and repaired immediately. If not, you risk the air bag deploying while you are driving. Once you have addressed the problem, just reset the light and it will turn off. You should reset it as soon as you have fixed the problem, so it can accurately alert you to any future problems that may arise.
Instructions
- 1
Get inside your Frontier and close all doors. Put the key into the ignition and turn it to the "on" position. Make sure you dont start the engine, though. Once the air bag light flashes, turn the key to the "off" position immediately.
2Wait 10 seconds and turn the vehicle on, wait for the air bag light to flash, then immediately turn off the vehicle.
3Repeat Step 2 one more time. This should reset and turn off the air bag light.
Friday, November 29, 2013
How to Troubleshoot a 2005 Ford Escape
The 2005 Ford Escape is a compact SUV sold by the Ford Motor Company. It was first presented to the public in 2000 for the 2001 model year. Even though the Ford Escape was considered to be one of the best-selling SUVs in America, according to the Edmunds website, it is not without its problems. However, if you have the right tools and information, you should be able to troubleshoot your 2005 Ford SUV.
Instructions
- 1
Check your Ford Escape for starter problems. Listen for grinding noises from the starter. If your SUV will not start or the dashboard will not light up, your battery may be dead and need to be charged or replaced. Also check the battery cables to see if they need to be connected more securely to the battery.
2Check your engine oil. If you have an change oil sticker in the upper left corner of your cars window, check to see if the oil change date is overdue. If your oil change is overdue, make an appointment to receive an oil change to avoid problems. If you dont have a sticker, check your oil by using the oil dipstick under the hood of your SUV. Pull the stick out, wipe it clean with a cloth. Place the stick back into the slot and check the gauge on the stick to see if your oil is too low. You can either add the required oil that your car needs or decide that its time for a complete oil change.
3Listen for screeching sounds that may be coming from your vehicles engine while your engine is on. If you can hear whining sounds coming from the engine after you turn it on, you may need to replace the power steering pump.
4Check to see if you can hear any knocking noises coming from your engine when driving at low speeds. If you hear knocking noises, have a professional mechanic check out your cooling system, the air-fuel mixture in the combustion chamber and transmission.
Friday, November 8, 2013
How to Disarm a Passenger Seat Belt Alarm in a 2005 Toyota Camry
You can disarm the passenger seat belt alarm in your 2005 Toyota Camry right from your home garage, saving yourself a trip to the mechanic. The instructions can be found in your vehicles owners manual. The chime is there to remind you to fasten your safety belt, but most people just find it annoying. Just remember that if you disable it, be sure to fasten your seat belt before driving because its the law in most states.
Instructions
- 1
Put the key into the ignition and turn it one click, taking care not to start the engine.
2Push in the tiny knob several times on the instrument cluster to toggle between the trip odometer and the vehicles odometer reading. Eventually it will display "ODO" on the instrument panel. Turn off the vehicle.
3Turn on the ignition and hold the tiny knob for about 10 to 15 seconds. While still holding the knob, put on your safety belt.
4Release the knob and notice that your dashboard says "B off." The chime has been disabled.
Thursday, October 17, 2013
How to Replace the Fuel Line in a 2005 Ford Thunderbird
The Ford Thunderbird was introduced in 1955 and, over the ensuing years, this popular car went through eleven generations. The 2005 Thunderbird is a two-seat convertible powered by a V-8 engine with an output of 280 horsepower and 286 foot-pounds of torque. The engine is paired with a five-speed automatic transmission. The fuel lines on this car are prone to develop leaks if the lines rub against any metal parts under the car. Once that happens, the fuel lines need to be replaced.
Instructions
- 1
Make sure the Thunderbird is in neutral and lift it on a hoist. Release the fuel system pressure by opening the gas cap. Disconnect the ground cable from the battery using a wrench. Remove the left front wheel using the torque wrench and then remove the splash shield using a flat-head screwdriver.
2Disconnect the fuel hose safety clip and spring lock coupling using a flat-head screwdriver. Disconnect the two vapor tubes and then the quick-release fittings from the evaporative canister purge valve. Remove the fuel-tube mounting bolt using the correct size socket. When re-installing this bolt, torque to 71 inch-pounds.
3Disconnect the fuel-tube quick release fittings from both sides of the fuel filter. Remove the fuel filter bracket mounting bolt using a socket. Remove the fuel filter bracket and fuel filter by simply turning it counterclockwise. When reassembling, tighten to 62 inch-pounds with the appropriate socket. Remove the fuel tube shield mounting bolt with the torque wrench. When re-installing, tighten to 44 inch-pounds. Remove the three fuel tubes, the shield mounting fasteners and the fuel tube shield with a flathead screwdriver. When reassembling, tighten to 44 inch-pounds.
4Disconnect the fuel tube quick release fitting from the fuel tank supply tube. Disconnect the vapor tube quick release fitting from the fuel vapor control tube assembly valve. Remove the four fuel tubes, the mounting bolts and the fuel tube assembly with the socket. When reassembling, tighten these bolts to 62 inch-pounds using the socket. Fit in the new fuel tubes. To reassemble, follow the above steps in reverse.