Saturday, February 8, 2014
How to Disable the Alarm on a Chrysler Concord
The Chrysler Concord comes with an alarm installed on the car. If you want to install a different car alarm on your Concord, or you are looking to remove the alarm all together, you will need to disable the alarm beforehand. Disabling the car alarm in your Chrysler Concord is not a very difficult task. You can disable the alarm without the need of an experienced installer, in just a couple of minutes.
Instructions
- 1
Unlock the doors to your Chrysler Concord and get into the drivers seat. Put your key into the ignition and then turn the key to the "Acc" position to engage the alarm.
2Take the dashboard panels off around the ignition cylinder on the drivers side of the Concord by popping them off with your fingers.
3Look for the alarm transmitter. This will be a small black box with a switch on it.
4Press the "Valet Switch" on the transmitter. This will be labeled. Wait until the LED light turns off on the transmitter.
Thursday, January 16, 2014
How to Disable an Aveos Alarm
The Chevy Aveo comes with a standard car alarm that runs off of the cars battery. This alarm can be loud and obnoxious if you need to change out your battery or a tire on your car. You can disable the alarm by disconnecting it from its power supply. Because the alarm runs off of the battery, disconnecting it from the battery will disable it, leaving you in peace to make your repairs.
Instructions
- 1
Open the hood of the Aveo.
2Locate the battery and attach a socket wrench to the batterys negative (-) terminal.
3Turn the socket wrench counterclockwise to loosen the terminal.
4Pull the terminal off of the battery to disable the Aveo alarm.
Friday, November 8, 2013
How to Disarm a Passenger Seat Belt Alarm in a 2005 Toyota Camry
You can disarm the passenger seat belt alarm in your 2005 Toyota Camry right from your home garage, saving yourself a trip to the mechanic. The instructions can be found in your vehicles owners manual. The chime is there to remind you to fasten your safety belt, but most people just find it annoying. Just remember that if you disable it, be sure to fasten your seat belt before driving because its the law in most states.
Instructions
- 1
Put the key into the ignition and turn it one click, taking care not to start the engine.
2Push in the tiny knob several times on the instrument cluster to toggle between the trip odometer and the vehicles odometer reading. Eventually it will display "ODO" on the instrument panel. Turn off the vehicle.
3Turn on the ignition and hold the tiny knob for about 10 to 15 seconds. While still holding the knob, put on your safety belt.
4Release the knob and notice that your dashboard says "B off." The chime has been disabled.
Friday, October 4, 2013
How to Deactivate a Factory Car Alarm
It may go off in the middle of the night, disturbing people as much as a mile away. Of course, its the alarm on your car --and compounding the problem, you may have trouble turning it off. Car alarms were invented to keep others from tampering with or stealing your car, but they can be a nuisance unless you know how to deactivate them, particularly one that comes with a car.
Instructions
- 1
Start your car --in most cases that will silence the alarm. However, there are some cars that arent accessible because the door locks are disabled when the alarm sounds. If that happens with your car, try putting the key in either the drivers or the passengers door, turning it and then waiting a few seconds. The alarm usually will stop.
2Raise the hood and find the alarm. The cars operators manual will tell you where it is. You can stop the alarm by inserting the key that came with the car, assuming you have it. Turn the key clockwise and, in most cases, the alarm will be disabled.
3Locate the fuse box and remove the one for the car alarm. Since the car came with the alarm installed, the fuse box is likely below the steering wheel. Once again, consult the operators manual for the section on your alarm. Open the box --in most cases there is a schematic drawing that will help you locate the right fuse. Remove it and the alarm will be disabled unless there is an electrical problem where the alarm continues to sound.
4Disconnect the battery if all the above solutions are not effective. Using a wrench, remove the negative battery cable to silence the alarm. Once the alarm is off, put the battery cable back on and start your car. Remember that you will lose all your settings on your radio, clock and other accessories unless you invest a few dollars in an automotive memory saver that you can put into the lighter socket on your dashboard.