Friday, April 11, 2014
Oil Types for Hondas
Honda manufactures many different types of engines for its cars and vehicles, lawn mowers and power tools. Whichever type of Honda engine you have, its important to use the proper oil to get the best performance and the longest life from your engine.
Water Vehicles
For outboard motors and other water vehicle engines, Honda has a certified 10W-30 motor oil that is available through Honda Marine dealers. The oil is specifically designed to provide lubrication for four-cylinder, water-cooled engines. Honda recommends this oil for its marine motors because it helps fight corrosion, reduce rust and improves performance at high temperatures.
Automotive Engines
For Honda cars, Honda dealers carry a specific oil recommended by Honda. The oil comes in a semi-synthetic version and a mineral-based version. The semi-synthetic oil is a 15W-40 oil and is good for any Honda car engine. The mineral-based version is a 10W-30 oil and is also a good option for Honda cars. If your Honda-recommended oil isnt available, talk to your dealer about the best choice for your Honda.
Small Power Engines
Whether you have a lawn mower with a Honda mower or another small power tool that uses a Honda engine, its important to review your owners manual when selecting the oil for your engine. Small Honda engines are designed to use petroleum-based oil, so avoid synthetic oils. Otherwise, make sure that the oil you choose meets all of the recommendations listed in your manual.
Saturday, April 5, 2014
What Are the Different Types of Clutch Kits
There are a few different types of clutch kits designed to meet the needs for your specific driving application. When purchasing a new clutch kit, match the clutch kit with the horse power of your vehicle and the work load your vehicle will endure. A clutch kit usually includes the clutch disc, pressure plate, throw-out bearing and pilot bearing. You need to purchase a clutch kit for replacement and upgrades.
RV Heavy-Duty Clutch Kits
RV Heavy-Duty clutch kits are designed for heavy towing in vehicles with higher torque ratings, such as trucks and RVs. The clutch plates and clutch disc surface areas are thicker, which allows them to endure the additional torque of heavy-duty vehicles. Without a heavy-duty clutch kit, heavy-duty vehicles cause additional damage to the clutch disc. This results in replacing the clutch disc more frequently and could lead to vehicle damage. There are different RV heavy-duty clutch kits you can purchase. When choosing a new RV heavy-duty clutch kit, choose one that is appropriate for your vehicles horsepower rating, torque rating and expected weight of your haul. Most auto parts stores have an expert on site to help you choose the proper clutch kit for the size of your truck or RV.
Stock Street Clutch Kit
Stock street clutch kits are the clutch kits used for vehicles that are driven regularly on the street. Most cars and sport-utility vehicles come equipped with stock street clutches and can be upgraded if the driver desires. If you purchased a standard factory model car, chances are it came with a stock street clutch. However, if you upgrade to a sports package on your car model, your vehicle may require a clutch kit for high performance vehicles because the horsepower and torque ratings might be higher. The clutch plate and clutch disc on stock street clutch discs have a medium thickness and padding to allow for easy transition between gears in vehicles with medium horsepower. Check with an automotive technician or parts dealer to find out if a stock street clutch kit is right for your vehicle.
Racing Clutch Kit
Race cars are high performance vehicles modified to travel at fast speeds and require special clutch kits that allow for quick and easy shifting between gears. Whether your race car is used for quarter-mile drag racing or long distance stock racing, your vehicle performance will be greatly improved by upgrading to a racing clutch kit. The padding on the clutch disc and clutch plates is slightly thinner than on stock street and RV heavy-duty clutch kits, which provide less friction and allows for faster shifting between gears. Race cars are not intended for hauling heavy loads, which means the gears dont have to be shifted as often, resulting on less wear on the clutch pads. There are several retailers that market racing clutch kits to provide the best performance from your race car.
Sunday, December 8, 2013
Types of Grease Fittings
Grease fittings are used to lubricate machine parts that require grease. They are available in different threads, lengths, materials and finishes, and are filled with grease from a grease guns. The head of the grease fitting prevents the grease from escaping the fitting.
Air Vent Grease Fittings
Air vent grease fittings are used on transmissions and gear boxes on automobiles. They allow air to escape while preventing water and dirt from entering.
Stainless Steel Grease Fittings
Stainless steel grease fittings offer greater resistance against corrosion unlike traditional carbon steel grease fittings.
Leak Proof Grease Fittings
Leak proof grease fittings are airtight and use a special purpose grease or lubrication. This special purpose grease or lubrication creates the airtight seal.
Special Thread Grease Fittings
Special thread grease fittings are designed to use special lubrication. They are used to fit into straight threaded holes.
Pressure Relief Grease Fittings
Pressure relief grease fittings are mostly used in gear box housings and bearings. They are found where excessive lubricant pressures are not desired.
Friday, November 15, 2013
Split Rim Types
Split rims represent a piece of automotive history hardly used today. Due to the heavy use of inner tubes to keep tires inflated in early vehicles, well before the days of tubeless tires and solid wheel rims, split rims made it easy for a vehicle owner to pull out a flat tube and replace it on the side of the road. However, these rim types had their flaws, which appeared over time as the vehicles aged.
Definition
In a split-rim wheel, the rim that the tire is beaded onto consists of two or more parts. When the tire is deflated the rim nuts can be loosened. The rim halves then separate and come off the tire with a little encouragement from a tire lever tool. Inside the tire and on the rim halves sits the inner tube that keeps the tire inflated; without the inner tube, the air pressure would just squeeze through the halves.
Two-Wheeled Application
Vintage scooters, such as the Italian Vespa and Lambretta scooters, predominantly used split-rim wheels. This feature made it easy for riders to repair a flat on the side of the road, as long as a new inner tube was available inside the glovebox. However, when such tubes failed, the loss of air tends to be catastrophic and can cause a significant accident if the rider is not paying attention at the handles. Unlike solid rim tires that just leak air out until flat, split-rim tires lose air pressure suddenly.
Large Vehicle Application
Split rims can be found on off-road vehicles, old buses and large construction vehicles as well. Again, the intention is to make it easier for the operator to repair the flat tire out in the open rather than having to bring the vehicle in to a mechanics tire-rim separator machine. However, such units can be difficult to actually manage repairs and frequently take some serious grunt power and levering to pull the rims off the tires.
Commercial Truck Wheels
Very old commercial trucks from the World War II era also used split rim wheels. The system worked with two halves, but the wheels had a lock circlip-type solid ring that kept the parts together when assembled. The ring had to be removed first when the air pressure was deflated to then get the parts separated. Half-ton, three-quarter ton, and full one-ton trucks were assembled with these wheel systems and corresponding rim sizes.
Thursday, October 3, 2013
Types of Catalytic Converters for Scrap
Catalytic converters can be worth their weight in gold. In fact, when the metal market crashes, only the rhodium, palladium, platinum and gold in these car parts is worth extracting. The outer steel casing is only worth throwing into a pile with other steels to be melted down and recycled.
Small Foreigns
Small foreigns are appropriately named, as these converters come off of compact non-American-origin vehicles. These converters are usually small and lightweight and may lack a "honeycomb" pattern on the outside. Due to the steel grille on the inside part of the exhaust pipe on these converters, they must be busted in half to obtain the precious metals within. Some older small foreigns may have silver in them instead of gold and may lack rhodium entirely.
Large Foreigns
Large foreigns are named as such because these converters come off of luxury-sized and larger non-American-origin vehicles. These converters may weigh up to 50 lb. each and are often bolted and welded to the underside of the vehicle, requiring a standard reciprocating saw and a sledgehammer to remove them. Large foreign catalytic converters have a steel grille on the inside of the exhaust pipe and must be broken apart to retrieve the metal within. Though gold is usually in short supply in most large foreign models, these are full of platinum and rhodium.
General Motors
GM, or General Motors, catalytic converters come from vehicles that are made under the General Motors name, such as Chevrolet or GMC. These converters come from all sizes of vehicle made by this company. Because these converters lack a steel grille inside the exhaust pipe, inserting a thin, solid metal rod into one end of the exhaust pipe and pounding it against the metal inside will work to extract the precious metals. GM catalytic converters are often found to contain mostly platinum and palladium.
BMW
BMW catalytic converters come from vehicles with the same name. These are not classified as large foreigns, despite their overseas origin, because of their structure. These catalytic converters are often made in a Y-shape, with three "honeycomb" areas in total to extract metal from. Though these models dont have a steel grille inside the exhaust pipes, its difficult to extract the precious metals from these catalytic converters without breaking them apart. Smashing them with a sledgehammer will often open one side enough so you can pry out the metal within.
Ford
Ford catalytic converters are found in cars made by Ford, such as Ford or Mercury vehicles. These catalytic converters are often quite heavy and filled with mostly rhodium. Since these converters dont have a metal grille on the inside of the exhaust pipe, they may be extracted in the same manner as GM models.