Monday, May 12, 2014
What Tools Are Needed for a Small Engine Repair
Small engine repair includes work on boats, motorcycles, lawn mowers, dirt bikes and all-terrain vehicles. When an engine needs repair, mechanics need specialized tools. The type of tools required depend on the size of the engine and the type of repair. Most repairs require the same basic tools every small-engine repair mechanic should have access to.
Hand Tools
Hand tools are the most commonly used for small engine repairs. Because they are smaller, portable and convenient to use, they are a staple of any mechanics tool supply. Hand tools are especially essential for removing or securing parts in small, tight spaces of an engine. The most commonly used hand tools are wrenches, pliers and screwdrivers.
Power Tools
More complicated repairs might require the use of power tools, such as drills, grinders and electric screwdrivers. Drills and grinders are used to make adjustments to parts for better fit, and electric screwdrivers help remove and secure nuts and bolts more quickly.
Diagnostic Tools
Because engine problems must be diagnosed before repairs can begin, diagnostic tools are important. Diagnostic tools range from compact, small devices to large, sophisticated, stationary equipment. Repairing smaller engines might require the use of both; however, compact, portable devices are more beneficial for mechanics who travel. Smaller diagnostic devices include tools used for detecting bad engine parts and tuning engines, such as compression gauges, ammeters, voltmeters and computerized engine analyzers.
Other Tools
Some repairs require the use of a mechanical jack used for heavy lifting. Jacks are especially important for accessing parts of the engine that extend underneath a vehicle. Small mechanical jacks are portable and compact, whereas large hydraulic jacks are stabilized and best used in a shop atmosphere. Also, safety is an issue in regard to engine repair, especially when power tools or devices with electric current are in use. For this reason, mechanics should always have safety goggles and work gloves nearby.
Saturday, April 5, 2014
What Are the Different Types of Clutch Kits
There are a few different types of clutch kits designed to meet the needs for your specific driving application. When purchasing a new clutch kit, match the clutch kit with the horse power of your vehicle and the work load your vehicle will endure. A clutch kit usually includes the clutch disc, pressure plate, throw-out bearing and pilot bearing. You need to purchase a clutch kit for replacement and upgrades.
RV Heavy-Duty Clutch Kits
RV Heavy-Duty clutch kits are designed for heavy towing in vehicles with higher torque ratings, such as trucks and RVs. The clutch plates and clutch disc surface areas are thicker, which allows them to endure the additional torque of heavy-duty vehicles. Without a heavy-duty clutch kit, heavy-duty vehicles cause additional damage to the clutch disc. This results in replacing the clutch disc more frequently and could lead to vehicle damage. There are different RV heavy-duty clutch kits you can purchase. When choosing a new RV heavy-duty clutch kit, choose one that is appropriate for your vehicles horsepower rating, torque rating and expected weight of your haul. Most auto parts stores have an expert on site to help you choose the proper clutch kit for the size of your truck or RV.
Stock Street Clutch Kit
Stock street clutch kits are the clutch kits used for vehicles that are driven regularly on the street. Most cars and sport-utility vehicles come equipped with stock street clutches and can be upgraded if the driver desires. If you purchased a standard factory model car, chances are it came with a stock street clutch. However, if you upgrade to a sports package on your car model, your vehicle may require a clutch kit for high performance vehicles because the horsepower and torque ratings might be higher. The clutch plate and clutch disc on stock street clutch discs have a medium thickness and padding to allow for easy transition between gears in vehicles with medium horsepower. Check with an automotive technician or parts dealer to find out if a stock street clutch kit is right for your vehicle.
Racing Clutch Kit
Race cars are high performance vehicles modified to travel at fast speeds and require special clutch kits that allow for quick and easy shifting between gears. Whether your race car is used for quarter-mile drag racing or long distance stock racing, your vehicle performance will be greatly improved by upgrading to a racing clutch kit. The padding on the clutch disc and clutch plates is slightly thinner than on stock street and RV heavy-duty clutch kits, which provide less friction and allows for faster shifting between gears. Race cars are not intended for hauling heavy loads, which means the gears dont have to be shifted as often, resulting on less wear on the clutch pads. There are several retailers that market racing clutch kits to provide the best performance from your race car.
Monday, March 31, 2014
What Are the Causes of Intermittent Car Ignition Problems
A bad ignition switch that intermittently goes off can cause a vehicle to die while youre driving. This can be dangerous, especially in heavy traffic. Having information on intermittent car ignition problems can be beneficial to automobile owners.
Causes
A couple of things that can cause an automobile to experience intermittent ignition problems. Sometimes these issues happen because you have a faulty ignition coil. However, the problems can also stem from a failed crankshaft position sensor.
Ignition Check
When experiencing intermittent car ignition problems, you and an assistant can perform a spark check in an effort to identify the problem. If the motor has spark plug wires, they should be taken off and placed beside the engine block. As your assistant starts the engine, your job is to check for a spark, because failure of the wire to produce a spark indicates a faulty ignition system.
Shock Warning
During the spark check with your assistant, you will need to be caul, especially after the vehicle has been started. You should make no contact with the wires, because if the ignition system turns out to be in working order while youre touching them, you could receive an electric shock.
Tuesday, December 24, 2013
What Are the Solid Axle Alignment Camber Specifications
Camber is the angle that a wheel tilts when viewed from the front of the vehicle. If the top of the wheel tilts out, the wheel has a positive camber. If it tilts in, it has a negative camber. Camber measurements are usually given in degrees, but they are also sometimes given in inches. Most vehicles from the early 1900s came with fixed front and rear axles, and it is still common for vehicles to have fixed rear axles. The preferred caster angle varies significantly from make to make and model to model, and it often varies from year to year and even trim to trim of a given model.
Early American Cars
Early Fords came with fixed axles and the preferred camber setting for most models was +0.25 to +1.0 degree, likewise most early Chevrolets with fixed axles called for a preferred camber setting of +0.5 to +1.5 degrees and early Mopar vehicles with fixed axles had an ideal camber setting of +0.25 to +0.75 degrees. However, the preferred settings could vary from model to model and year to year. It is extremely important to find the camber settings for the specific model, model year and trim before attempting to make any adjustments.
Contemporary Cars
For contemporary vehicles, the camber is usually adjustable only on the front end, unless the vehicle has independent rear suspension. Vehicles without independent rear suspension, such as most pickup trucks, will have a fixed rear axle. The ideal camber is usually zero for fixed axles on contemporary vehicles. If the camber angle is not the ideal setting, it suggests a bent or damaged part rather than an alignment problem, and it cannot be adjusted by normal wheel alignment techniques and more than likely will require more extensive repairs.
Heavy-Duty Vehicles
It is still common for tractor-trailers, buses and RVs to come with fixed front axles. As with other types of vehicles, the camber specs can range from make to make and model to model of heavy-duty vehicles. However, Bee Line, an industry leader in heavy-duty truck alignment equipment, uses zero to +0.4 degrees as an industry standard for the preferred setting of fixed steering axles. Adjusting the camber on heavy-duty vehicles normally requires applying several tones of pressure to bend the vehicles axle.
Thursday, December 5, 2013
What Are Acceptable Ergonomic Torques for DC Electric Right Angle Tools
Even a clean and orderly workplace can produce health challenges for the employees. Repetitive motions, a lack of lumbar support and physically demanding work with poor tools are three examples of the ways environments can lead to back, shoulder or other body issues. Ergonomic awareness plays a key role in preventing possible issues. In the specific case of torque application, an informed tool selection can lead to both less body stress and an overall heightened productivity.
Torque Tool Overview
Torque tools apply a rotational motion to threaded fasteners. The tools are typical choices for tightening or removing lug nuts on automobiles or bolts during the manufacturing process. Sensors built into the tools can provide real-time measurements for the applied torque and rotation. However, use of these tools can apply forces apart from those directed toward the fasteners they are designed to tighten. When bolts are secured, the tools can jerk on user wrists or limbs before coming to a full stop. These stresses are the subject for ergonomics. Understanding the limits of both the tools and the human bodies using them will result in an informed selection of the best possible tool for the job.
Acceptable Limits
Human bodies come in a single shape with room for subtle variations. The mass of the human arm is one of the determining factors for the amount of force it can resist. Fitness is a determinant in how much force a body can tolerate. Limits still apply to all cases. Too great a level of force will result in tissue, bone or joint damage, no matter how fit the tools user. An acceptable ergonomic torque tool is determined to be those devices which cause the least amount of force to the wielder once the threaded fastener has been tightened to its limit.
Qualitatively Defining Discomfort
Through use of a tool test rig, a University of Ohio researcher investigated several styles of torque tools. He devised a method to understand the effects different tools have on the users, known as a response torque. According to his literature survey and observations, high levels of discomfort corresponded to high response torques. The research study tested specific effects by creating spring and pressure systems to represent variables such as arm stiffness, joint hardness and arm mass. With these, the study could judge how much torque different tools applied to their users. Tools demonstrated acceptable response torque ranges between 8.8 to 44.3 foot-pounds (12 to 60 Newton-meters). He tested pneumatic and electric tools with various configurations. In the end, he rated each tool with a discomfort level, which can be used to qualitatively compare each tools efficacy as an ergonomic device.
Research Study Results
DC electric-powered right angle tools received low to medium discomfort ratings. These tools operate on DC power and are constructed with a long handle, allowing easy access to hard-to-reach bolts, nuts or other joint connectors. This handle also acts like the simple tool known as a lever, using its distance component to aid the user. As with other models of torque tightening tool, such as the drill-shaped torque wrench, the right angle design produces twists or jerks to the users wrists, arms and shoulders after the fastener is tightened to the limit. However, instead of relying on a humans ability to release a trigger in a timely fashion, many right angle tools come with a computer-aided, real-time torque monitor, which can respond much more quickly.
Wednesday, November 13, 2013
What Are the Different Kinds of Turbochargers
Developed as a means of increasing the power and reducing the fuel used through the compression of air, turbochargers were initially limited to large gas powered engines such as trucks and boats. It was not until 1962 that American automakers first utilized them in passenger vehicles, but did not gain real ground until the 1970s when diesel-run engines began to utilize the technology. Today, turbochargers are more common and the industry has expanded beyond the standard style.
Axial-flow Turbocharger
Axial-flow turbochargers are defined by the manner in which the fuel flows through the turbine. With axial-flow turbochargers the fuel flow comes through the wheel in an axial direction. With this type of turbocharger expansion of the gas from the exhaust creates an output the helps the turbine to rotate the compressor. As the size of the vehicle is important in determining the vehicles correct turbocharger, it is important to consider that axial-flow turbochargers are most commonly used with vehicles with a wheel diameter of 300mm and up and would not be suitable for smaller vehicles.
Radial Flow Turbocharger
With a gas outflow that uses the same principles as the axial flow turbocharger, the radial-flow turbocharger is differentiated by the unique gas inflow structure. The centripetal gas inflow is directed from the outside in a radial direction and sets this turbocharger apart from the axial-flow model. Generally utilized on vehicles with a wheel diameter of 160mm or less, this kind of turbocharger can increase the power of a vehicle to up to 1,000 horsepower.
Exhaust Gas Turbocharger
The benefits of turbochargers are many, from increased speed, power, and engine functionality, but there are environmental benefits, as well, such as decreased gas consumptions. Exhaust gas turbochargers have another added benefit. With exhaust gas turbo chargers, the exhaust from the vehicle is recycled into the compressor to provide power for the turbine. To accomplish this, a compressor is mounted beside the turbine on the same shaft. The turbine draws in the exhaust, which would otherwise go into the atmosphere, compresses and feeds it into the engine to provide extra power. Unlike mechanically enhanced turbochargers, no mechanical coupling occurs in the engine.
Tuesday, November 12, 2013
What Are the Four Steps of the Four Stroke Combustion Cycle
Internal combustion engines produce power by igniting fuel inside of an airtight cylinder and forcing a piston out of the cylinder at high speed. This process can be fueled by a number of substances, but the vast majority of engines use gasoline or diesel fuel. There are four distinct stages in the functioning of an internal combustion engine.
Intake
In the intake step, the piston is drawn down the cylinder while the valve is open. This draws air into the cylinder, where it is mixed with fuel. The piston and the valves are connected through a series of parts in this order: piston, connecting rod, crankshaft, camshaft, lifter and valve. This allows the valve to open and close at precisely the right time in relation to the motion of the piston.
Compression
When the piston reaches the lowest point in its back-and-forth motion, it moves from intake to compression. A protrusion on the rotating camshaft pushes the lifter against the valve, forcing the valve to close. At the same time the piston moves back up the cylinder, compressing the mixture of fuel and air that is now trapped in the cylinder.
Power
When the piston reaches the top of the cylinder and the fuel and air mixture is at maximum pressure, the spark plug creates a spark and the mixture is ignited. Gasoline is a highly explosive fuel, so this event creates a great deal of power. The explosion drives the piston back down the cylinder. Through the connections mentioned above, this movement is translated from linear to circular motion and transferred to the transmission of the vehicle, where it moves an axle that is attached to wheels, powering the vehicle.
Exhaust
As soon as the piston reaches the bottom of the cylinder, the valve opens, the piston goes back up the cylinder and the exhaust from the ignited fuel is forced out of the cylinder. The cycle then begins again. All of this happens with great frequency, creating an even flow of power to the wheels of the vehicle.
Friday, November 1, 2013
What Are the Blue Red Valves on a Refrigerant Recovery Tank
Standard refrigerant recovery tanks come equipped with both red and blue valves located at the top of the tank. The colors designate the different forms of refrigerant they recover.
Red Valve
The red valve is a vapor valve used to recover refrigerant in a vapor state. Vapor recovery takes more time than recovery of liquid refrigerant. Care should be taken when recovering refrigerant in vapor state as it is under pressure and combustible.
Blue Valve
The blue valve is designated as a liquid valve used to recover liquid refrigerant. Removal of liquid refrigerant is a faster process than removal of vapor refrigerant, but the user may be exposed to additional hazards. Care must be taken in recovering liquid refrigerant as there is potential for frostbite if the refrigerant comes in contact with skin. Eye injury is possible in the event of a refrigerant splash.
Safety Tips
Users should be licensed to handle refrigerant. Safety gear such as protective eye wear and protective gloves should be used. Always refer to the manufacturers instructions before attempting to operate any machinery.
Saturday, October 26, 2013
What Metals Are Engine Pistons Made From
All modern engine pistons are made from an aluminum alloy. The alloy behaves somewhat differently under use according to how the piston is made, so an understanding of the manufacturing process is important. Until the 1970s, the subject of cast versus forged pistons frequently was a debated topic; since then, advances in technology have made the debate all but redundant to the everyday driver.
Piston Material Evolution
In the original internal combustion engines, steel was used to make pistons. Aluminum alloy took over very early on. The earliest aluminum pistons were subject to considerable expansion and contraction because of operational heat, and the design was evolved so that steel rings -- called struts -- were molded into the walls to reduce the problem. This type of piston was common until the 1960s, when the introduction of silicon into the alloy made strutting redundant. Most modern pistons are made with around 25-percent silicone.
The early aluminum-silicone alloy was renowned for its brittleness; accidentally dropping one from bench height usually resulted in a crack that was at best expensive and at worst impossible to repair. The addition of nickel to the alloy reduces the brittleness, but increases the weight-to-mass relationship.
Piston Design
Pistons have nine parts and sections. The piston top properly is called the crown; below this are the ring grooves into which are fitted the piston rings. The raised areas between the ring grooves are called the lands. Below the ring assembly is the piston pin hole. The piston pin -- called the "wrist pin" in industry speak -- passes through this hole and passes through the connecting rod. Around the piston pin are pin bosses that support its ends. The bottom of the piston is called the skirt.
Cast Pistons
The cast piston is molded from a molten aluminum alloy, which is drawn by vacuum into steel dies; only minimal machining is necessary to finish the resulting piston. The process is called gravity die casting. The shape and wall thickness is fully controlled, but the process is expensive.
Forged Pistons
The forged piston is made first by placing an ingot of warmed aluminum alloy into a female mold; after this, a male ram is forced into the mold to stamp the metal into a piston blank. The blank then undergoes many machining operations; a single forging set-up typically produces a blank that can be machined into numerous piston sizes to suit a wide variety of vehicles.
Comparisons
Casting was the original method of piston manufacture; forging came along later as an alternative. The forging process compresses the alloys molecules at the crown, making the metal more dense and, therefore, better able to withstand the extremes of temperature. This is a substantial benefit because the crown is exposed to more heat than any other part of the engine except the spark plug.
Practical Applications
Cast pistons are made in intricately shaped dies that determine their shapes both inside and out; this allows for a uniform and constant wall thickness that keeps the mass of the piston to a minimum. The process of setting up the dies is costly, so cast pistons typically are only made for multiple applications and to meet massive production requirements. Forged pistons have a comparatively crude internal shape after being stamped, determined only by the ram being driven into the ingot, then being retracted. This normally means considerable turning and hand-finishing is required. Far tighter tolerances are achieved through this method. For these reasons, performance pistons are almost always forged, while OEM-spec pistons are cast.
Saturday, September 21, 2013
What Are the Benefits of Dual Exhaust
All vehicles are equipped with an exhaust system, which is responsible for transporting burned engine exhaust gases from a vehicles engine exhaust port and directing them out of the vehicles tail pipe. Although exhaust systems come in both single and dual varieties, dual exhaust systems have major advantages over single systems.
Engine Power
A dual exhaust system increases engine horsepower by speeding up the rate at which engine combustion gases escape an engine. By allowing engine exhaust gases to exit an engine much quicker than a single exhaust system, a dual exhaust system reduces both engine back pressure and workload, which results in a considerable increase in engine horsepower.
Gas Mileage
Speeding up the rate at which exhaust gases escape an engine allows an engine to "breathe" better and turn easier, thereby increasing vehicle gas mileage by eliminating engine strain.
Engine Longevity
Vehicles equipped with dual exhaust systems generally have engines that last longer.
Engine Efficiency
An engines overall efficiency is related to how effectively it burns its engine combustion gases and removes them through its exhaust system. Dual exhaust systems, which allow for the rapid escape of burned exhaust gases, promote increased engine combustion and combustion gas removal, both of which lead to an increase in overall engine efficiency.
Exhaust Efficiency
Vehicles equipped with dual exhaust systems generally produce more efficient exhaust emissions than do vehicles equipped with single exhaust. Dual exhaust systems allow for more efficient and complete burning of exiting exhaust gases, due in part to the speed at which these gases exit and engine, which leads to an overall increase in exhaust efficiency.