Showing posts with label needed. Show all posts
Showing posts with label needed. Show all posts

Monday, May 12, 2014

What Tools Are Needed for a Small Engine Repair

Small engine repair includes work on boats, motorcycles, lawn mowers, dirt bikes and all-terrain vehicles. When an engine needs repair, mechanics need specialized tools. The type of tools required depend on the size of the engine and the type of repair. Most repairs require the same basic tools every small-engine repair mechanic should have access to.

Hand Tools

    Hand tools are the most commonly used for small engine repairs. Because they are smaller, portable and convenient to use, they are a staple of any mechanics tool supply. Hand tools are especially essential for removing or securing parts in small, tight spaces of an engine. The most commonly used hand tools are wrenches, pliers and screwdrivers.

Power Tools

    More complicated repairs might require the use of power tools, such as drills, grinders and electric screwdrivers. Drills and grinders are used to make adjustments to parts for better fit, and electric screwdrivers help remove and secure nuts and bolts more quickly.

Diagnostic Tools

    Because engine problems must be diagnosed before repairs can begin, diagnostic tools are important. Diagnostic tools range from compact, small devices to large, sophisticated, stationary equipment. Repairing smaller engines might require the use of both; however, compact, portable devices are more beneficial for mechanics who travel. Smaller diagnostic devices include tools used for detecting bad engine parts and tuning engines, such as compression gauges, ammeters, voltmeters and computerized engine analyzers.

Other Tools

    Some repairs require the use of a mechanical jack used for heavy lifting. Jacks are especially important for accessing parts of the engine that extend underneath a vehicle. Small mechanical jacks are portable and compact, whereas large hydraulic jacks are stabilized and best used in a shop atmosphere. Also, safety is an issue in regard to engine repair, especially when power tools or devices with electric current are in use. For this reason, mechanics should always have safety goggles and work gloves nearby.

Read More.. >

Sunday, October 13, 2013

How do I Determine Which Fuel Pump Is Needed for a 99 Chevrolet Silverado V6

How do I Determine Which Fuel Pump Is Needed for a 99 Chevrolet Silverado V6?

General Motors engineered the fuel system of the 1999 Chevrolet Silverado V6 4.3L with and without an evaporative emissions system monitoring system. Chevrolet designed the fuel pump as an integrated module assembly, combining the fuel pump and fuel level sensor together as a single unit. Delphi manufactures fuel pumps for General Motors. 1999 Chevrolet Silverados equipped with the evaporative emissions monitoring system also have a pressure sensor built into the fuel pump module assembly. The engine computer applies vacuum to the fuel tank and monitors the sensor to verify the tank holds the vacuum. If the tank leaks, pressure drops and the check engine light will turn on.

Instructions

    1

    Park the vehicle on a flat surface such as a driveway. Set the parking brake and remove the keys from the ignition.

    2

    Chock the front tire of the 99 Silverado with wheel chocks to prevent the vehicle from rolling.

    3

    Lift the left rear drivers side tire of the 99 Chevy with the floor jack. Place a jack stand under the axle tube for safety.

    4

    Remove the plastic lug nut covers by hand using a 3/4 inch impact socket.

    5

    Remove the lug nuts using the 1/2 inch drive impact wrench and a 13/16 inch socket. Remove the left rear tire.

    6

    Lean into the wheel well toward the front of the bed. Shine the flashlight onto the top of the fuel tank. Extend the inspection mirror to inspect the top of the fuel pump module assembly.

    The fuel pump module assembly is round where it inserts into the tank, and has three fuel lines attached to it. The fuel pump module assembly also has a square four-wire harness plugged into it to provide power to the fuel pump and to measure the fuel level.

    7

    Look for a small black sensor with a wide flat three-wire harness plugged into it. Also inspect the four-wire fuel pump harness for a tag with three prominent letters printed on it.

    Vehicles equipped with evaporative emissions monitoring have the black sensor, two wiring harnesses plugged into the fuel pump module assembly and have a code on the four-wire fuel pump harness labeled "TCF." Delphis aftermarket part number for this fuel pump module assembly is FG0053.

    Vehicles without evaporative emissions system monitoring do not have the black sensor, only have one wiring harness plugged into the fuel pump module assembly and have a code labeled on the four-wire fuel pump harness labeled "TCU." Delphis aftermarket part number for this fuel pump module assembly is FG0271.

Read More.. >