Showing posts with label location. Show all posts
Showing posts with label location. Show all posts

Monday, April 21, 2014

The Location of the LT1 Engine PCV

The Location of the LT1 Engine PCV

The LT1 is a small block, high output engine produced by General Motors. The positive crankcase ventilation (PCV) system consists of a breather tube and a valve connected to the engine.

Location

    On an LT1, the PCV valve is located on the intake manifold, on the drivers side. The breather tube runs to the front of the engine.

Identification

    The PCV valve connects to the engine with a rubber stopper. It is below and to the right of the vacuum and the brake booster.

Models

    The LT1 engine was used in the Chevrolet Corvette, Camaro, Caprice and Impala. It was also used in the Buick Roadmaster and Pontiac Firebird.

Read More.. >

Saturday, November 9, 2013

Ford 2 0L Oil Pressure Valve Location

The 2.0-liter Duratec four-cylinder engine is found in many popular Ford vehicles, including the Ford Focus. The oil pressure valve, also known as the oil pressure sender or oil pressure switch, is an important component of the engine control system. Proper functioning of the valve is necessary for the vehicle to run correctly as well as emissions inspection purposes. You can easily check and replace the valve if necessary.

Instructions

    1

    Raise the vehicle with a floor jack. Position jack stands under the jacking points on the frame for support. Never work on a vehicle supported only by a floor jack!

    2

    Locate the oil filter on the side of the engine closest to the front of the vehicle.

    3

    Locate the oil pressure valve on the drivers side of the oil filter bracket on the engine. It can be identified by the electrical connector plugged into it.

Read More.. >