Tuesday, October 29, 2013
How to Install a Dodge Ram Track Bar
A common problem in the Dodge Ram is deterioration and failure of the bushings at each end of the track bar. The track bar keeps the front axle from moving side to side. It is held onto the truck in two locations. One end mounts to the axle, and the other end mounts to the frame. Replacement track bars can be purchased at your local auto parts store. A mechanic can install the track bar for you, but you can do it yourself and save on the labor.
Instructions
- 1
Spray each bolt that secures the track bar to the vehicle with penetrating fluid. Allow the fluid to seep into the track bar for 15 minutes.
2Remove the cotter pins on the bolts with a pair of pliers.
3Unscrew the bolts that secure the track bar in place with a ratchet and socket.
4Detach the track bar from the brackets on the vehicle.
5Install the new track bar into its brackets and install the bolts into the mounting holes.
6Tighten the nuts with the ratchet and socket.
7Place the end of a grease gun onto the fitting and fill the bushing with grease.
8Slide the cotter pins that came with the new track bar through the holes in the mounting bolts. Bend the end of the cotter pin with pliers to prevent the nuts from vibrating loose.
No comments:
Post a Comment