Sunday, April 20, 2014
How do I Replace a Timing Belt on a 2000 Hyundai Elantra
The Hyundai Elantra is a series of compact cars that Hyundai has manufactured since 1990. The 2000 model represents the last year of the second generation Hyundai, which had a 4-cylinder, 2.0-liter engine as its standard engine. This engine uses a timing belt to synchronize the movement of the camshaft and crankshaft as opposed to a timing chain. The timing belt in a 2000 Hyundai requires replacement approximately every 60,000 miles.
Instructions
- 1
Disconnect any components necessary to access the cover of the timing belt. Remove the timing belt cover with a socket wrench.
2Turn the crankshaft clockwise to position the No. 1 piston at the top dead center position as indicated by the timing marks on the crankshaft. Disconnect the tensioner for the timing belt and the idler pulley with a socket wrench. Remove the timing belt from the camshaft sprocket and the crankshaft sprocket.
3Turn the camshaft sprocket clockwise to align its timing marks and ensure the timing marks for the crankshaft timing are still aligned. Connect the tensioner for the timing belt with a socket wrench, but do not tighten the pulley bolt for the tensioner. Install the idler pulley and tighten its mounting bolt to between 32 and 41 foot-pounds.
4Place the timing belt over the sprocket of the camshaft, then over the sprocket of the crankshaft. Turn the timing belt tensioner counterclockwise to place tension on the timing belt. Apply 5 pounds of force to the middle of the longest span of the timing belt. The deflection of the timing belt will be between 0.16 inches and 0.24 inches when the timing belt is at the correct tension.
5Tighten the pulley bolt for the timing belt tensioner to between 32 and 41 foot-pounds with a torque wrench. Turn the crankshaft sprocket clockwise by one turn to align the timing marks on the crankshaft sprocket. Adjust the timing belt tension as required.
6Replace the cover for the timing belt. Install any additional components that you removed in step one to access the timing belt.
Tuesday, December 3, 2013
How to Replace the High Stoplight on a 2007 Hyundai Sonata
The high-mount stoplight or combination light assembly, as Hyundai calls it, on the rear of the 2007 Sonata uses a 921 bulb, which is a key part of the Sonatas rear lighting system. The light is designed to be highly visible to drivers behind you when the Sonatas brakes are applied and helps to avoid rear-end collisions. Removal of the Sonatas taillight assembly is required to replace the stoplight.
Instructions
- 1
Open the trunk of your Sonata and lay on your back inside the trunk looking up at the bottom of the package tray, or rear deck, directly below where the light assembly sits. Locate the two gold-colored Phillips head screws that retain the light assembly.
2Remove the two retaining screws using a long Phillips screwdriver then move to the inside of the car to access the light assembly on the top side of the rear deck, which is inside the passenger compartment. Lift the rear of the assembly slightly while pulling it forward to free it from the package tray. Turn the assembly over and locate the bulb socket on the underside.
3Rotate the bulb socket counterclockwise to unlock it, then pull it out of the taillight housing. Grasp the bulb, pull it straight out of the socket and discard it. Push a new 921 bulb into the socket; make sure it seats completely.
4Slide the bulb and socket into the taillight assembly then rotate the socket clockwise a quarter turn, locking it in place. Turn the taillight assembly over, slide the tabs on the bottom of the assembly in the holes in the package tray and slide the assembly forward until it sits flat on the tray.
5Move to the trunk and reinstall the two Phillips head screws with the long screwdriver. Tighten the screws until they are snug. Do not over-tighten these screws or you will crack the taillight assembly.
6Close the trunk and test the light; have someone step on the brake pedal or watch the light while you press the pedal. If the light functions properly, the repair is successful.
Thursday, November 28, 2013
How Do I Change an Oxygen Sensor on a 1997 Hyundai Accent GL
The 1997 Hyundai Accent oxygen sensor threads into the exhaust manifold beneath the heat deflector under the car. The O2 sensor regulates the fuel consumption of the engine based upon the oxygen saturation of the exhaust. If the gas mileage in your car has inexplicably decreased substantially and the check engine light is on, you may have a failing O2 sensor. Buy a replacement sensor at an auto parts store or Hyundai dealership.
Instructions
- 1
Raise the Accent with a jack. Rest the car on a set of jack stands.
2Disconnect the wiring harness from the O2 sensor just beneath the exhaust manifold heat deflector.
3Remove the bolts on the outer edge of the heat deflector with a socket and ratchet. Set the heat deflector and bolts aside in a safe location. Remove the O2 sensor with an O2 sensor socket and ratchet.
4Install the new sensor by hand to avoid cross threading it. Tighten the sensor with an oxygen sensor socket and ratchet. Reconnect the wiring harness on the O2 sensor by pressing it into place.
5Replace the heat deflector. Secure the deflector with the bolts and tighten the bolts with a socket and ratchet.
6Raise the car slightly with a jack and remove the jack stands. Lower the car to the ground.
Thursday, October 24, 2013
How to Replace the Oxygen Sensor in a Hyundai Elantra
The Hyundai Elantra has been around since 1991, but wasnt made available in North America or Europe until 1993. Featuring different four-cylinder engines throughout its generational redesigns, replacing the oxygen sensors has remained a fairly standardized repair for the imported car. The upstream sensor is in the manifold or front head pipe and the downstream sensor is near the catalytic converter. The same tools can be used to replace either one, but the sensors are slightly different part numbers and are not interchangeable.
Instructions
- 1
Start the Hyundai Elantra for five minutes or so to warm up the exhaust. Drive it up onto the car ramps, apply the parking brake, shut the car off and then block one of the rear wheels with a wheel block. If youre replacing the front oxygen sensor, release the hood latch before getting out of the Elantra and then open the hood after setting the wheel block.
2Crawl under the Elantra with the tools and replacement sensor(s). Locate the sensor in question; front upstream sensor near the manifold and downstream sensor near the catalytic converter.
3Apply a generous amount of penetrating oil to the area where the threads of the sensor connect to the pipe or manifold. Allow five to 10 minutes for it to soak in. Apply a second coat if necessary.
4Disconnect the oxygen sensor wire from the wire harness plug connection. A small straightedge screwdriver may help release the press-in tabs of the plug, but be careful since its made of plastic.
5Use the swivel-head ratchet and oxygen sensor socket to remove the front sensor or a 22 mm wrench for the downstream sensor. Be sure the wire of the sensor is placed in the slot of the oxygen sensor socket. For the 22 mm box-end wrench, feed the wire through the wrench first and then place the box-end side onto the hexagonal shaped sensor. Apply steady pressure on the ratchet or wrench in the counterclockwise position to unscrew it from the exhaust system.
6Screw the new sensor into the oxygen sensor port. Most all Bosch direct fit sensors have a light coating of anti-seize compound on the thread to make removal of the sensor for the next replacement easier. Do not to allow the anti-seize compound to contaminate the thimble-shaped tip of the sensor.
7Tighten the sensor until it feels snug. Do not over-tighten as the threads of the sensor are delicate and you can easily strip them. Plug the sensor wire back into the wire harness.
Wednesday, October 23, 2013
How to Replace a 2003 Hyundai Sonata Timing Belt
The 2003 Hyundai Sonata is available with a four-cylinder 2.0-liter engine with a double overhead cam. This engine design requires a timing belt to synchronize the crankshaft with the camshaft. The Sonatas timing belt should be replaced approximately every 60,000 miles.
Instructions
- 1
Remove components as required to access the cover of the timing belt on the front of the engine. Disconnect the cover with a socket wrench. Turn the crankshaft clockwise to align the timing mark on the crankshaft sprocket with the timing mark on the cylinder head. This places the No. 1 piston in the top dead center position needed to replace the timing belt.
2Disconnect the tensioner and the idler pulley for the timing belt with a socket wrench. Detach the timing belt from the crankshaft and camshaft.
3Turn the crankshaft clockwise again to align the timing marks if necessary. Connect the tensioner for the timing belt and the idler pulley. Tighten the mounting bolt for the idler pulley to between 32 and 41 ft-lbs. with a torque wrench.
4Place the timing belt over the camshaft sprocket and crankshaft sprocket in that order. Turn the timing belt tensioner to place tension on the timing belt. The timing belt is at the proper tension when five pounds of force in the middle of the longest span of the timing belt produces a deflection of 0.16 to 0.24 in.
5Tighten the bolt for the tensioner pulley to between 32 and 41 ft-lbs. with a torque wrench. Turn the crankshaft sprocket clockwise by one complete turn to realign the timing marks.
6Adjust the belt tension again if necessary. Replace the cover of the timing belt cover and any components you removed to access the timing belt.
Friday, October 18, 2013
How Do I Replace a 2000 Hyundai Sonata GLS Oxygen Sensor
The oxygen sensors in the 2000 Hyundai Sonata GLS are threaded into the exhaust manifold and the exhaust pipe near the catalytic converter. When an oxygen sensor malfunctions, your car will burn a significant amount of additional fuel. To save the unnecessary fuel expense and possible long-term engine damage, you should replace the sensors as soon as possible. Buy sensors for your Sonata from an auto-parts store or Hyundai dealer.
Instructions
- 1
Raise the Sonata with a jack. Rest the car on jack stands for stability.
2Locate the oxygen sensor either on the manifold or near the catalytic converter, depending on which one you need to change. Pull the wiring connection apart. Remove the oxygen sensor using a wrench.
3Coat the threads of the sensor with anti-seize. Select an anti-seize compound designed for electrical components. Insert the new sensor by hand. Torque it to 40 foot-pounds with your torque wrench.
4Push the two ends of the wiring harness together. The connector will click when it is attached. Repeat the replacement process on the second oxygen sensor if necessary. Lift the car slightly and pull the jack stands out of place. Lower the car to the ground.
Tuesday, October 15, 2013
How to Tow a Hyundai Elantra
If you need to have your Elantra towed in an emergency, the manufacturer strongly recommends that you use a professional and authorized towing company, preferably one that is an authorized Hyundai dealer. If this option is unavailable, however, you may need to rig your Elanta to be towed by another vehicle. This can be dangerous if the materials used are not in good working order, but it is otherwise an effective method for short distance towing.
Instructions
- 1
Set your ignition switch to the "Acc" position.
2Place your shift lever to the Neutral position.
3Release your parking brake.
4Fasten the towing cable or chain securely to the towing hook. The front towing hook is located under the grill, centered across the front; the rear towing hook is under the frame, centered across the back. Ensure that your towing hook is not broken or damaged. Use a towing strap that is less than 16 feet long.
5Pull the vehicle straight on, not from an angle. Never use this method to pull the vehicle out of mud, sand or snow.
Monday, October 14, 2013
My 1998 Hyundai Elantra Wont Start After it Sits
If you are having problems starting your Hyundai Elantra after it sits, there could be a couple of issues going on. You might have a dead battery in your car. When the battery sits, it loses its charge. You could also have a leaky fuel tank. If you let the car sit with a leaky fuel tank, the gas in the tank could leak out, leaving your Elantra unable to start. Other issues could be with corrosion on the battery terminals or a bad alternator/starter. You can easily troubleshoot the problem with little knowledge of the subject before you race out and spend money on a mechanic.
Instructions
- 1
Look around the fuel tank of your Elantra. Note any leaks, or if the ground surrounding the car smells like gas. Have the car towed to a mechanic to patch the fuel tank if you find a problem.
2Insert your key into the Elantras ignition and then try to start the car. If you hear a clicking sound, have the starter and then alternator looked at by a mechanic. They can hook your car up to specialized equipment and test these components.
3Open the hood to the car and smell around the battery. If the battery smells like rotten eggs, have the battery replaced.
4Disconnect the terminals from the battery and clean them with a wire brush and some soda. This will clean any corrosion off of the terminals.
5Check the wires coming off of the battery terminals for any cracks or breaks. Have terminal wires replace by a mechanic if you find any cracks or breaks. Breaks in the wiring will keep the current from flowing to the motor.
6Reconnect the battery terminals after you have cleaned them or had the wires replaced. Try to restart the car.
7Jump-start the car and leave it running for about 5 minutes to charge the battery. Turn the car off and then try to restart it.
8Replace the battery if the car will not restart.
Wednesday, September 25, 2013
How to Change a 2001 Hyundai Accent Timing Belt
The Hyundai Accent is a subcompact car that has been in production since 1994. The engine in this vehicle has an overhead camshaft, which generally requires a timing belt. The timing belt synchronizes the movements of the crankshaft and camshaft. The 2001 Hyundai Accent has a non-freewheeling engine, so you will typically need to replace the timing belt every 60,000 miles. This procedure requires you to remove additional components to access the timing belt.
Instructions
- 1
Disconnect the cable from the negative battery terminal with a socket wrench. Put a drain pan under the radiator and remove the drain plug, allowing the coolant to drain out. Disconnect the mounting bolts for the water pump pulley and push the pulley aside. Turn the belt tensioner to loosen the drive belt. Disconnect the crankshaft pulley and the cover for the timing belt.
2Turn the crankshaft clockwise to move the No. 1 piston to the top dead center position. Loosen the bolts on the tensioner with a socket wrench and move the tensioner as close to the water pump as possible. Tighten the adjusting bolt for the tensioner to hold it in place. Remove the timing belt from its pulley. Disconnect the sprocket bolt for the crankshaft with a socket wrench. Detach the flange and sprocket from the crankshaft.
3Install the sprocket and flange to the crankshaft. Torque the sprocket bolt to between 103 and 111 foot-pounds with a torque wrench. Align the timing marks on the crankshaft with those on the camshaft sprocket by turning the crankshaft clockwise.
4Loosen the adjusting bolt on the belt tensioner and move the tensioner back to its normal position. Place the new timing belt over the sprocket of the crankshaft and slip the back of the belt onto the tensioner. Turn the sprocket of the camshaft clockwise to tighten the straight side of the belt.
5Tighten the adjusting bolt for the tensioner to between 15 and 18 foot-pounds with a torque wrench. Then, torque the pivot bolt to between 15 and 18 foot-pounds. Turn the crankshaft clockwise one complete turn to seat the timing belt.
6Loosen the attaching bolts on the tensioner and allow the tensioner to position itself. Tighten the bolts with a socket wrench. Adjust the belt tension so that the teeth come halfway across the head of the tensioner adjusting bolt when you pull the belt towards the water pump.
7Connect the cover for the timing belt with a socket wrench and connect the crankshaft pulley. Fasten the mounting bolts for the water pump pulley and refill the radiator with coolant. Connect the cable to the negative battery terminal.