Tuesday, April 22, 2014
When Is it Time to Replace Compressed Air Hoses
Compressed air hoses are powerful tools for workers in a variety of industries. While their power can speed up the pace of work, they can be extremely dangerous if used past their prime. A few key signs indicate when it is time to replace a compressed air hose.
Kinking
If a compressed air hose is permanently kinked, it is time to replace the hose. A backup of compressed air at the kinked area could lead to an explosion, which could be deadly.
Fraying or Cracking
The fraying of the protective fabric surrounding a compressed air hose -- or the cracking of the rubber if no fabric is present -- is a sign that the compressed air hose needs to be replaced. The rapid escape of compressed air from a hole in the hose can cause serious injury to workers and bystanders.
Bending
If a compressed air hose is bent, it needs to be replaced as soon as possible. Bending of a compressed air hose can drastically alter the air flow and potentially create an accident leading to serious injury.
Pressure Ratings
Each compressed air hose is rated to withstand a maximum pounds per square inch in air pressure. If a compressed air hose is not rated to withstand the compressor it is fitted to, it is time to replace the hose.
Maintenance
Compressed air hoses should be cleaned regularly using soapy water, not kerosene or other flammable material. After cleaning, make sure the compressed air hose is completely purged. While doing maintenance work on the compressed air hose, make sure the compressor or other equipment is attached to is turned off.
Wednesday, October 16, 2013
Why Wont My Car Start When It Rains
A car engine refusing to start can be any number of issues. A car that wont start in the rain can still be any number of issues, but it gives you a place to start looking.
Spark Plug
The most common reason for a car not starting in the rain is found in the spark plugs. Wire insulation can wear thin and this causes the voltage to arc to the metal of the car engine rather then going into the spark plug. You can check for this visually by opening the hood when its wet outside and trying to start the car. You might be able to see an arc from the spark plug wires.
Distributor Cap
The second most common issue is the distributor cap. Take a good physical examination of your distributor cap for any signs of a cracks. Also remove the distributor cap and check the inside of it for moisture. If you find any, wipe it clean; it wont work while wet.
Other Issues
If a check of the spark plugs and the distribution cap has not solved your problem, then you have a bigger issue. There are dozens of other reasons a car wont start, from battery corrosion to a fuel filter issue keeping gas from reaching the engine. Though few of these other issues will only affect your vehicle during the rain.
Monday, October 14, 2013
My 1998 Hyundai Elantra Wont Start After it Sits
If you are having problems starting your Hyundai Elantra after it sits, there could be a couple of issues going on. You might have a dead battery in your car. When the battery sits, it loses its charge. You could also have a leaky fuel tank. If you let the car sit with a leaky fuel tank, the gas in the tank could leak out, leaving your Elantra unable to start. Other issues could be with corrosion on the battery terminals or a bad alternator/starter. You can easily troubleshoot the problem with little knowledge of the subject before you race out and spend money on a mechanic.
Instructions
- 1
Look around the fuel tank of your Elantra. Note any leaks, or if the ground surrounding the car smells like gas. Have the car towed to a mechanic to patch the fuel tank if you find a problem.
2Insert your key into the Elantras ignition and then try to start the car. If you hear a clicking sound, have the starter and then alternator looked at by a mechanic. They can hook your car up to specialized equipment and test these components.
3Open the hood to the car and smell around the battery. If the battery smells like rotten eggs, have the battery replaced.
4Disconnect the terminals from the battery and clean them with a wire brush and some soda. This will clean any corrosion off of the terminals.
5Check the wires coming off of the battery terminals for any cracks or breaks. Have terminal wires replace by a mechanic if you find any cracks or breaks. Breaks in the wiring will keep the current from flowing to the motor.
6Reconnect the battery terminals after you have cleaned them or had the wires replaced. Try to restart the car.
7Jump-start the car and leave it running for about 5 minutes to charge the battery. Turn the car off and then try to restart it.
8Replace the battery if the car will not restart.
Saturday, September 21, 2013
Can a Heater Work in a Car Before It Is Warm
As the weather starts to cool, the dials on the temperature controls in your car will inevitably start to migrate toward the "red" end of the dial. As you furiously rub your hands together after hopping in your car and starting the engine on a cold morning, you wonder why the heater doesnt work until the car is warmed. Unfortunately, it cant.
Your Resting Car
There is a typical temperature range within which the engines of most cars are designed to operate, usually around 200 degrees. When your car is at rest, the mechanical components and fluids are allowed to cool to ambient temperature.
Your Car as it Warms
You turn the key in the ignition, and the belts begin to turn the pulleys on the engine. Coolant is stored and cooled in the radiator, where it is pulled out by the water pump and circulated through the engine. The coolant then passes through an opening in the firewall (the sheet metal panel separating the engine compartment from the cabin of the vehicle) into the heater core. Similar to the radiator, the heater core has small fins through which the heated coolant passes to dissipate heat. This heat is pulled away from the heater core, using fans, and blown into the cars interior.
Your Car After Reaching Operating Temperature
When you have driven your car for a few minutes, the engine has reached normal temperature. The coolant from the radiator is keeping the extreme heat of the engine in check. The fluid circulates through the engine and through the heater core. The fans pull hot air from the heater core into the cabin, which heats your cars interior. Until the engine heats, the coolant remains cool. Until the coolant heats, your heater core remains cool. When your heater core heats, so does your cars interior.
1999 Dodge Status Dashboard Problems It Is Not Starting
The 1999 Dodge has a dashboard with status lights that indicate a problem. If you cant start your car and your dashboard isnt lighting up, the problem is probably the battery. The car battery sends electricity to your dashboard and to the engine to start. You can test your battery to see if you need a new one.
Instructions
- 1
Remove the key from the ignition and pop the hood to gain access to the battery.
2Tighten the connections to the battery terminals with a pair of pliers or a pair of channel locks. Try to start the vehicle.
3Look over the battery terminal cables. If you find any corrosion on the terminals, use a can of soda and a stiff wire brush to clean the terminals.
4Use a voltmeter to test the batterys charge. Place the red and black testing leads from the voltmeter to the red and black terminals on the battery.
5Look at the reading. If its less than 11 to 12 volts, the battery needs to be replaced.
6Replace the battery with a new one. If the car still wont start, have the car towed to a service shop for a diagnostics test.