Friday, June 6, 2014
Why Does My Car Not Steer As Easily After Replacing the Steering Rack
Replacing the steering rack on a vehicle is something that shouldnt have to be done often as they are known to be very durable and can last through well over 85,000 miles of driving. However, the time will come when wear or leaks will occur. This is why having information on steering problems that can happen after a replacement rack is installed can be beneficial to automobile owners.
Steering Stiffness
One type of problem that can occur after replacing a steering rack is that the car will not steer as easily as it did before. This can be caused due to a pressure leak in the piston seal of the steering rack. Steering stiffness can also happen when the steering pump fails to produce enough pressure.
Strange Steering
Some steering problems will cause a vehicle to steer to the left or to the right instead of straight ahead. Problems with steering alignment is often the reason for this type of issue. Another reason for this is when pressure is sent to one particular side of the steering rack due to a spool valve leak.
Steering Suggestions
Before replacing the steering rack on your vehicle, it is suggested to flush all the previous fluid from the steering lines and steering pump. Failing to do so can affect the life of your replacement rack as the old fluid is dirty and can be harmful to the new rack.
Monday, October 14, 2013
My 1998 Hyundai Elantra Wont Start After it Sits
If you are having problems starting your Hyundai Elantra after it sits, there could be a couple of issues going on. You might have a dead battery in your car. When the battery sits, it loses its charge. You could also have a leaky fuel tank. If you let the car sit with a leaky fuel tank, the gas in the tank could leak out, leaving your Elantra unable to start. Other issues could be with corrosion on the battery terminals or a bad alternator/starter. You can easily troubleshoot the problem with little knowledge of the subject before you race out and spend money on a mechanic.
Instructions
- 1
Look around the fuel tank of your Elantra. Note any leaks, or if the ground surrounding the car smells like gas. Have the car towed to a mechanic to patch the fuel tank if you find a problem.
2Insert your key into the Elantras ignition and then try to start the car. If you hear a clicking sound, have the starter and then alternator looked at by a mechanic. They can hook your car up to specialized equipment and test these components.
3Open the hood to the car and smell around the battery. If the battery smells like rotten eggs, have the battery replaced.
4Disconnect the terminals from the battery and clean them with a wire brush and some soda. This will clean any corrosion off of the terminals.
5Check the wires coming off of the battery terminals for any cracks or breaks. Have terminal wires replace by a mechanic if you find any cracks or breaks. Breaks in the wiring will keep the current from flowing to the motor.
6Reconnect the battery terminals after you have cleaned them or had the wires replaced. Try to restart the car.
7Jump-start the car and leave it running for about 5 minutes to charge the battery. Turn the car off and then try to restart it.
8Replace the battery if the car will not restart.
Saturday, September 14, 2013
My 2001 Dodge Ram Wont Start After Sitting for One Month
If you have not operated your 2001 Dodge Ram for a month or longer, you might find that the truck will not start. Long periods without use can cause the trucks fuel and oil to drain out of the engine, or the battery to drain as the alternator has not been recharging it regularly. You can follow a few simple steps to determine why your 2001 Dodge Ram is not starting after sitting idle for one month.
Instructions
- 1
Check to make sure that your truck is in Park all the way and that the steering is not locked and preventing the key from turning in the ignition. If you have an alarm with a cut-off, make sure the switch is in the "on" position and that the alarm is functioning properly. These oversights can sometimes be the cause of the problem and are simple to check.
2Turn on your lights and radio. If your lights and radio do not function, the Rams battery has probably been drained of its power. Try to jumpstart the Ram. If a jumpstart does not work, take the battery to an auto garage for testing. If your lights and radio do function, the battery is probably not the problem.
3Check your fuel level. If the truck cranks when you turn the key but does not start, the problem is likely fuel related. You may have left the truck with little or no gas in the tank, or the gauge may read that there is more fuel than there really is. If you left the truck in a cold climate, water in the gas may have frozen preventing fuel from reaching the engine. Even in warm climates, water in the tank can prevent fuel from firing. Add a container of dry gas or gas line antifreeze to the fuel tank to remove any excess water and try starting the Ram again.
4Check your fuel pump. Have a helper turn the ignition while you listen to the engine with the hood open. Once the ignition is turned, you should hear a little whining sound which lasts a few seconds. This is the fuel pump bringing gasoline to the engine. If you do not hear this sound, your fuel pump may be faulty.
5Check your ignition system fuse. A blown ignition fuse is an unlikely cause of the issue, but is worth a look before moving on to bigger things. You can find the fuse in the trucks fuse box.
6Determine whether the starter is functioning. If you have power but nothing happens when the key turns, the issue may lie with your starter or starter switch. Change the switch and see if that fixes the problem. If not, a new starter may be needed.
7Contact an automobile mechanic or garage if your truck still will not start. Special equipment may be needed to perform ignition system tests or further analyze the issue.