Showing posts with label replacing. Show all posts
Showing posts with label replacing. Show all posts

Friday, June 6, 2014

Why Does My Car Not Steer As Easily After Replacing the Steering Rack

Why Does My Car Not Steer As Easily After Replacing the Steering Rack?

Replacing the steering rack on a vehicle is something that shouldnt have to be done often as they are known to be very durable and can last through well over 85,000 miles of driving. However, the time will come when wear or leaks will occur. This is why having information on steering problems that can happen after a replacement rack is installed can be beneficial to automobile owners.

Steering Stiffness

    One type of problem that can occur after replacing a steering rack is that the car will not steer as easily as it did before. This can be caused due to a pressure leak in the piston seal of the steering rack. Steering stiffness can also happen when the steering pump fails to produce enough pressure.

Strange Steering

    Some steering problems will cause a vehicle to steer to the left or to the right instead of straight ahead. Problems with steering alignment is often the reason for this type of issue. Another reason for this is when pressure is sent to one particular side of the steering rack due to a spool valve leak.

Steering Suggestions

    Before replacing the steering rack on your vehicle, it is suggested to flush all the previous fluid from the steering lines and steering pump. Failing to do so can affect the life of your replacement rack as the old fluid is dirty and can be harmful to the new rack.

Read More.. >

Wednesday, January 22, 2014

Replacing Brake Lightbulbs on an Isuzu Rodeo

The brake lights on your Isuzu Rodeo notify other drivers when you are stopping, making a safer driving experience for everyone. In fact, working brake lights are required by law. If your brake lights are out, you create a hazard for other drivers who may not notice you are stopping or slowing down. Replace your brake lights as soon as they go out. Replacement bulbs are available at any major auto parts store.

Instructions

    1

    Use a Phillips screwdriver to remove the two screws on the sides of the taillight assembly.

    2

    Remove the Phillips screw from underneath the taillight assembly.

    3

    Pull the assembly toward you and out of the back end of the Rodeo.

    4

    Turn the top light socket counterclockwise to unlock it from the assembly. Slide it out of the taillight assembly. The top socket is the brake light, while the other two are the turn signal lights and reverse lights.

    5

    Press the bulb in toward the socket and turn it counterclockwise to disengage it from the socket. Pull the bulb out of the socket. Slide a new bulb into the socket, press it down and turn it clockwise to lock it into the socket.

    6

    Slide the socket back into the taillight assembly and turn it clockwise to lock it in. Slide the assembly back into the rear of the Rodeo and replace the screws.

Read More.. >