Wednesday, January 22, 2014
Replacing Brake Lightbulbs on an Isuzu Rodeo
The brake lights on your Isuzu Rodeo notify other drivers when you are stopping, making a safer driving experience for everyone. In fact, working brake lights are required by law. If your brake lights are out, you create a hazard for other drivers who may not notice you are stopping or slowing down. Replace your brake lights as soon as they go out. Replacement bulbs are available at any major auto parts store.
Instructions
- 1
Use a Phillips screwdriver to remove the two screws on the sides of the taillight assembly.
2Remove the Phillips screw from underneath the taillight assembly.
3Pull the assembly toward you and out of the back end of the Rodeo.
4Turn the top light socket counterclockwise to unlock it from the assembly. Slide it out of the taillight assembly. The top socket is the brake light, while the other two are the turn signal lights and reverse lights.
5Press the bulb in toward the socket and turn it counterclockwise to disengage it from the socket. Pull the bulb out of the socket. Slide a new bulb into the socket, press it down and turn it clockwise to lock it into the socket.
6Slide the socket back into the taillight assembly and turn it clockwise to lock it in. Slide the assembly back into the rear of the Rodeo and replace the screws.
Sunday, November 10, 2013
Isuzu Rodeo Transmission Problems
Japanese automaker Isuzu Motors Ltd. had the Rodeo pick-up truck built and sold in the United States from 1991 to 2004. Never the most reliable vehicles on the market, the earlier versions of the Isuzu Rodeo has a common problem concerning the transmission.
Problem
Some Isuzu Rodeos may experience failure of the force motor. This component is essential to the shifting components of the transmission; its malfunction may thus cause the transmission to have problems with shifting gears.
Affected Models and Transmissions
The earlier models of the Isuzu Rodeo -- specifically, of the 1991 to 1995 model years -- suffer from this problem. Also, the force motor failure is restricted to the vehicles alternative four-speed automatic transmission, the 4L30-E from General Motors. The standard three-speed manual gearbox is not afflicted by this issue.
Cost of Repair
As of December 2010, customers would need to pay about $189 for parts and $208 for labor to get the force motor fixed. The aforementioned prices are estimates based on an $65 hourly rate, excluding diagnostic time and tax.