Friday, June 6, 2014
Why Does My Car Not Steer As Easily After Replacing the Steering Rack
Replacing the steering rack on a vehicle is something that shouldnt have to be done often as they are known to be very durable and can last through well over 85,000 miles of driving. However, the time will come when wear or leaks will occur. This is why having information on steering problems that can happen after a replacement rack is installed can be beneficial to automobile owners.
Steering Stiffness
One type of problem that can occur after replacing a steering rack is that the car will not steer as easily as it did before. This can be caused due to a pressure leak in the piston seal of the steering rack. Steering stiffness can also happen when the steering pump fails to produce enough pressure.
Strange Steering
Some steering problems will cause a vehicle to steer to the left or to the right instead of straight ahead. Problems with steering alignment is often the reason for this type of issue. Another reason for this is when pressure is sent to one particular side of the steering rack due to a spool valve leak.
Steering Suggestions
Before replacing the steering rack on your vehicle, it is suggested to flush all the previous fluid from the steering lines and steering pump. Failing to do so can affect the life of your replacement rack as the old fluid is dirty and can be harmful to the new rack.
Saturday, September 21, 2013
1999 Dodge Status Dashboard Problems It Is Not Starting
The 1999 Dodge has a dashboard with status lights that indicate a problem. If you cant start your car and your dashboard isnt lighting up, the problem is probably the battery. The car battery sends electricity to your dashboard and to the engine to start. You can test your battery to see if you need a new one.
Instructions
- 1
Remove the key from the ignition and pop the hood to gain access to the battery.
2Tighten the connections to the battery terminals with a pair of pliers or a pair of channel locks. Try to start the vehicle.
3Look over the battery terminal cables. If you find any corrosion on the terminals, use a can of soda and a stiff wire brush to clean the terminals.
4Use a voltmeter to test the batterys charge. Place the red and black testing leads from the voltmeter to the red and black terminals on the battery.
5Look at the reading. If its less than 11 to 12 volts, the battery needs to be replaced.
6Replace the battery with a new one. If the car still wont start, have the car towed to a service shop for a diagnostics test.