Showing posts with label starting. Show all posts
Showing posts with label starting. Show all posts

Wednesday, November 6, 2013

2000 Pontiac Bonneville Starting Problems

2000 Pontiac Bonneville Starting Problems

On February 16, 2004, General Motors informed the National Highway Traffic Safety Administration that it would be recalling certain 2000 Bonneville Pontiacs for an issue causing drivers to experience backfires if the engine was not starting when cranked. Owners of this model experiencing starting problems should contact NHTSA to determine whether their vehicles were affected by this recall.

Cause

    2000 Bonnevilles equipped with 3800 V6 L36 engines and certain Delphi Fuel pressure regulators may experience a high level of fuel leaks that can let fuel into the intake manifold. The manufacturer reports that if the engine doesnt start when cranked, the car may backfire from the regulator fuel leak.

Consequence

    If the Bonneville backfires, the intake manifold may rupture. A rupture could cause the fuel line and fuel injector to displace, leading to a fuel lead or fire that could cause injury or property damage.

Solution

    Take affected vehicles to authorized dealers to have a new fuel pressure regulator installed. Call NHTSA or the manufacturer with the VIN number of the vehicle to verify that it was recalled, if necessary, or to find out where to take the car for free repair.

Read More.. >

Saturday, September 21, 2013

1999 Dodge Status Dashboard Problems It Is Not Starting

1999 Dodge Status Dashboard Problems: It Is Not Starting

The 1999 Dodge has a dashboard with status lights that indicate a problem. If you cant start your car and your dashboard isnt lighting up, the problem is probably the battery. The car battery sends electricity to your dashboard and to the engine to start. You can test your battery to see if you need a new one.

Instructions

    1

    Remove the key from the ignition and pop the hood to gain access to the battery.

    2

    Tighten the connections to the battery terminals with a pair of pliers or a pair of channel locks. Try to start the vehicle.

    3

    Look over the battery terminal cables. If you find any corrosion on the terminals, use a can of soda and a stiff wire brush to clean the terminals.

    4

    Use a voltmeter to test the batterys charge. Place the red and black testing leads from the voltmeter to the red and black terminals on the battery.

    5

    Look at the reading. If its less than 11 to 12 volts, the battery needs to be replaced.

    6

    Replace the battery with a new one. If the car still wont start, have the car towed to a service shop for a diagnostics test.

Read More.. >