Showing posts with label elantra. Show all posts
Showing posts with label elantra. Show all posts

Sunday, April 20, 2014

How do I Replace a Timing Belt on a 2000 Hyundai Elantra

The Hyundai Elantra is a series of compact cars that Hyundai has manufactured since 1990. The 2000 model represents the last year of the second generation Hyundai, which had a 4-cylinder, 2.0-liter engine as its standard engine. This engine uses a timing belt to synchronize the movement of the camshaft and crankshaft as opposed to a timing chain. The timing belt in a 2000 Hyundai requires replacement approximately every 60,000 miles.

Instructions

    1

    Disconnect any components necessary to access the cover of the timing belt. Remove the timing belt cover with a socket wrench.

    2

    Turn the crankshaft clockwise to position the No. 1 piston at the top dead center position as indicated by the timing marks on the crankshaft. Disconnect the tensioner for the timing belt and the idler pulley with a socket wrench. Remove the timing belt from the camshaft sprocket and the crankshaft sprocket.

    3

    Turn the camshaft sprocket clockwise to align its timing marks and ensure the timing marks for the crankshaft timing are still aligned. Connect the tensioner for the timing belt with a socket wrench, but do not tighten the pulley bolt for the tensioner. Install the idler pulley and tighten its mounting bolt to between 32 and 41 foot-pounds.

    4

    Place the timing belt over the sprocket of the camshaft, then over the sprocket of the crankshaft. Turn the timing belt tensioner counterclockwise to place tension on the timing belt. Apply 5 pounds of force to the middle of the longest span of the timing belt. The deflection of the timing belt will be between 0.16 inches and 0.24 inches when the timing belt is at the correct tension.

    5

    Tighten the pulley bolt for the timing belt tensioner to between 32 and 41 foot-pounds with a torque wrench. Turn the crankshaft sprocket clockwise by one turn to align the timing marks on the crankshaft sprocket. Adjust the timing belt tension as required.

    6

    Replace the cover for the timing belt. Install any additional components that you removed in step one to access the timing belt.

Read More.. >

Tuesday, January 21, 2014

How to Replace a Side Mirror on a 2008 Elantra

The side mirror on a Hyundai Elantra consists of a plastic shell bolted to the side of the door, a small motor bolted inside the shell and a mirror lens attached to the motor. Hyundai designed the mirror to withstand a moderate amount of impact. However, if struck hard enough, the mirror lens will shatter. A shattered mirror could cause you to fail a vehicle inspection or even get you a ticket in a traffic stop.

Instructions

    1

    Remove the glass shards from the shell of the mirror. The lens is made of plastic so you will not get cut by the shards. If any of the shards are attached to the mirror motor, pull out on them to pop them off the motor.

    2

    Suck any of the small shards of plastic out of the housing with a vacuum cleaner. Any small pieces of plastic left inside of the shell could jam between the new mirror lens and the plastic shell, preventing you from being able to adjust the mirror.

    3

    Place the replacement mirror lens in the shell. The tight tolerance of the shell forces the mirror to center in the hole.

    4

    Press on the mirror lens to push the mounting tabs on the back of the mirror lens around the mirror motor until you feel the mirror pop into place.

Read More.. >

Thursday, October 24, 2013

How to Replace the Oxygen Sensor in a Hyundai Elantra

The Hyundai Elantra has been around since 1991, but wasnt made available in North America or Europe until 1993. Featuring different four-cylinder engines throughout its generational redesigns, replacing the oxygen sensors has remained a fairly standardized repair for the imported car. The upstream sensor is in the manifold or front head pipe and the downstream sensor is near the catalytic converter. The same tools can be used to replace either one, but the sensors are slightly different part numbers and are not interchangeable.

Instructions

    1

    Start the Hyundai Elantra for five minutes or so to warm up the exhaust. Drive it up onto the car ramps, apply the parking brake, shut the car off and then block one of the rear wheels with a wheel block. If youre replacing the front oxygen sensor, release the hood latch before getting out of the Elantra and then open the hood after setting the wheel block.

    2

    Crawl under the Elantra with the tools and replacement sensor(s). Locate the sensor in question; front upstream sensor near the manifold and downstream sensor near the catalytic converter.

    3

    Apply a generous amount of penetrating oil to the area where the threads of the sensor connect to the pipe or manifold. Allow five to 10 minutes for it to soak in. Apply a second coat if necessary.

    4

    Disconnect the oxygen sensor wire from the wire harness plug connection. A small straightedge screwdriver may help release the press-in tabs of the plug, but be careful since its made of plastic.

    5

    Use the swivel-head ratchet and oxygen sensor socket to remove the front sensor or a 22 mm wrench for the downstream sensor. Be sure the wire of the sensor is placed in the slot of the oxygen sensor socket. For the 22 mm box-end wrench, feed the wire through the wrench first and then place the box-end side onto the hexagonal shaped sensor. Apply steady pressure on the ratchet or wrench in the counterclockwise position to unscrew it from the exhaust system.

    6

    Screw the new sensor into the oxygen sensor port. Most all Bosch direct fit sensors have a light coating of anti-seize compound on the thread to make removal of the sensor for the next replacement easier. Do not to allow the anti-seize compound to contaminate the thimble-shaped tip of the sensor.

    7

    Tighten the sensor until it feels snug. Do not over-tighten as the threads of the sensor are delicate and you can easily strip them. Plug the sensor wire back into the wire harness.

Read More.. >

Tuesday, October 15, 2013

How to Tow a Hyundai Elantra

How to Tow a Hyundai Elantra

If you need to have your Elantra towed in an emergency, the manufacturer strongly recommends that you use a professional and authorized towing company, preferably one that is an authorized Hyundai dealer. If this option is unavailable, however, you may need to rig your Elanta to be towed by another vehicle. This can be dangerous if the materials used are not in good working order, but it is otherwise an effective method for short distance towing.

Instructions

    1

    Set your ignition switch to the "Acc" position.

    2

    Place your shift lever to the Neutral position.

    3

    Release your parking brake.

    4

    Fasten the towing cable or chain securely to the towing hook. The front towing hook is located under the grill, centered across the front; the rear towing hook is under the frame, centered across the back. Ensure that your towing hook is not broken or damaged. Use a towing strap that is less than 16 feet long.

    5

    Pull the vehicle straight on, not from an angle. Never use this method to pull the vehicle out of mud, sand or snow.

Read More.. >

Monday, October 14, 2013

My 1998 Hyundai Elantra Wont Start After it Sits

My 1998 Hyundai Elantra Wont Start After it Sits

If you are having problems starting your Hyundai Elantra after it sits, there could be a couple of issues going on. You might have a dead battery in your car. When the battery sits, it loses its charge. You could also have a leaky fuel tank. If you let the car sit with a leaky fuel tank, the gas in the tank could leak out, leaving your Elantra unable to start. Other issues could be with corrosion on the battery terminals or a bad alternator/starter. You can easily troubleshoot the problem with little knowledge of the subject before you race out and spend money on a mechanic.

Instructions

    1

    Look around the fuel tank of your Elantra. Note any leaks, or if the ground surrounding the car smells like gas. Have the car towed to a mechanic to patch the fuel tank if you find a problem.

    2

    Insert your key into the Elantras ignition and then try to start the car. If you hear a clicking sound, have the starter and then alternator looked at by a mechanic. They can hook your car up to specialized equipment and test these components.

    3

    Open the hood to the car and smell around the battery. If the battery smells like rotten eggs, have the battery replaced.

    4

    Disconnect the terminals from the battery and clean them with a wire brush and some soda. This will clean any corrosion off of the terminals.

    5

    Check the wires coming off of the battery terminals for any cracks or breaks. Have terminal wires replace by a mechanic if you find any cracks or breaks. Breaks in the wiring will keep the current from flowing to the motor.

    6

    Reconnect the battery terminals after you have cleaned them or had the wires replaced. Try to restart the car.

    7

    Jump-start the car and leave it running for about 5 minutes to charge the battery. Turn the car off and then try to restart it.

    8

    Replace the battery if the car will not restart.

Read More.. >