Saturday, March 1, 2014

How to Install Jdm Fog Lights on a 94 Civic

How to Install Jdm Fog Lights on a 94 Civic

Fog lights are a second set of headlights set low in the front bumper of a car to improve sight-lines during difficult driving conditions. The 1994 Honda Civic came with these useful lights standard. In addition to fog, these powerful lights help cut through rain, snow and sleet as well. If you want to replace or upgrade your Civics fog lights to JDM lights all youll need are some simple tools and about a half an hour.

Instructions

    1

    Park the vehicle on a level surface that is away from traffic and well lit. Turn off the engine and set the emergency brake. Allow the vehicle to sit for 20 to 30 minutes or until the hood is completely cool to the touch.

    2

    Crawl under the front end on the drivers side. Locate the fog light attached in the rear of the bumper. Notice the wire plugged into the fog light socket, which is called the wiring harness. Squeeze the sides of the plug with your fingers and then pull it straight out.

    3

    Locate and remove the mounting bolts holding the light assembly to the bumper. A simple adjustable wrench will do this job. Then slide out the old fog light assembly.

    4

    Slide in the JDM fog light assembly and secure it in the bumper with the same mounting bolts. Plug the wiring harness into the new socket. Repeat this process for the passengers side fog light and you will have completed the upgrade to JDM fog lights.


No comments:

Post a Comment