Find solution

How to Hook Up the Fuel Pump on a 1994 Ford F450

A 1994 Ford F450 truck uses a high-pressure fuel pump thats part of an in-tank reservoir assembly, or ITR. The ITR also includes a shuttle selector valve, a supply check valve and a venture jet pump. Your fuel pump must be compatible with your trucks specific engine. The engine in a 1994 Ford F450 may be a 7.3L Diesel, 7.3L Turbo Diesel or 7.5L engine. All versions of the 1994 Ford F450 use electronic fuel injection.

Instructions

1

Drain the fuel tank and disconnect the cable to the batterys negative terminal with a socket wrench. Remove the fuel tank. Disconnect the fuel pump from the electrical connector, and clean the dirt from the area around the fuel pump. Disconnect the fuel lines from the fuel pump.

2

Place a wood dowel against the tabs of the fuel pumps locking ring and hammer the locking ring loose. Turn the locking ring counterclockwise to loosen it. Pull the fuel pump out and remove the gasket from the groove in the fuel tank.

3

Put the new fuel pump gasket into the matching groove of the fuel tank, and place the fuel pump into the fuel tank. Keep the fuel pump and gasket in place as you align the tabs on the locking ring with the matching slots in the fuel tank.

4

Turn the fuel pumps locking ring clockwise until it stops against the tab of the retainer ring. Ensure the gasket for the fuel pump is still in place.

5

Connect the fuel lines and the electrical connector to the fuel pump. Install the fuel tank and connect the cable to the batterys negative terminal. Fill the fuel tank.

Posted by Unknown at 10:45 AM

Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest

Labels: 1994, a, f450, ford, fuel, hook, how, on, pump, the, to, up