Monday, May 12, 2014
How to Remove a Parking Lamp From a Chrysler Crossfire
The Chrysler Crossfire, largely based on the first-generation Mercedes SLK, was the "first tantalizing fruit" of the short-lived DaimlerChrysler merger, according to Edmunds.com. Check all your vehicles lamps periodically to ensure they are functioning. If the parking lamp on your Crossfire has burned out, replace it straight away. Doing so is an uncomplicated process that needs no tools and does not take much time.
Instructions
- 1
Turn off the vehicle and ensure the light selector switch is in the "Off" position.
2Push the sidemarker assembly into the car and slide it forward -- for the front sidemarker light -- and towards the rear -- for the rear sidemarker light. The light assembly will release from the vehicle.
3Turn the bulb assembly counterclockwise. The bulb assembly will release from the sidemarker light. Push the bulb into the assembly and twist counterclockwise, releasing the bulb.
4Replace the bulb by inserting the new bulb and turning clockwise. Replace the bulb assembly by aligning the tabs on the assembly with the corresponding tabs on the sidemarker light. Twist clockwise to lock it in place.
5Open the hood and lock it in place to remove the front standing lights. Twist the bulb assembly counterclockwise and remove it from the lector.
6Push the bulb into the assembly and twist it counterclockwise to remove. Reverse the steps to install a new bulb.
No comments:
Post a Comment