Showing posts with label truck. Show all posts
Showing posts with label truck. Show all posts

Friday, May 9, 2014

How to Replace the Water Pump in a 1998 Dodge Truck

Chrysler sells a line of Ram pickup trucks under its Dodge brand. The 1998 models belonged to the second generation of Rams, which were in production from 1994 to 2001. The procedure for replacing the water pump in a 1998 Dodge truck depends primarily on its engine. The most common engine in this vehicle is an 8-cylinder 5.2-liter engine that runs on gasoline. The water pump is accessible from the engine compartment and is located in front of the engine block.

Instructions

    1

    Remove the cable on the batterys negative terminal with a socket wrench to prevent you from inadvertently starting the engine during the water pump replacement. Place a container under the drain hole for the radiator and remove the radiator drain plug. Wait for the coolant to drain into the container and replace the drain plug.

    2

    Disconnect the accessory drive belt with a socket wrench, and detach the lower radiator hose from the radiator. Remove the heater hose from the water pump if your vehicle is so equipped.

    3

    Detach the upper radiator hose from the radiator with a socket wrench. Disconnect the cooling fan assembly from the engine block, including the fan shroud. Remove the bolts for the water pump pulley and detach the pulley from the engine block.

    4

    Remove the mounting bolt for the heater hose pipe with a socket wrench. Release the clamp for the bypass hose on the water pump and detach the bypass hose. Disconnect the mounting bolts for the water pump, and remove the water pump.

    5

    Install the new water pump and tighten the mounting bolts to 30 foot-pounds with a torque wrench. Connect the bypass hose to the water pump and attach the clamp for the hose. Apply sealant to the threads on the heater hose pipe. Connect the heater hose pipe, and tighten the mounting bolt to 12 foot-pounds. Spin the water pump to ensure the impeller for the water pump does not contact the timing chain case.

    6

    Connect the pulley for the water pump and tighten the mounting bolts to 20 foot-pounds with a torque wrench. Install the cooling fan assembly and connect the hoses to the radiator. Attach the accessory drive belt. Fill the radiator with coolant and check for leaks in the cooling system.

Read More.. >

Friday, May 2, 2014

Tips on Professional Truck Frame Repair

Repairing a rusted or cracked truck frame professionally is a desirable skill, both for those who work on big rigs and for do-it-yourselfers restoring older classic trucks or fixing their own trucks to make sure they pass inspection. Whatever the reason, there are a number of steps to performing a professional truck frame repair that you should follow.

Removing Accessory Pieces From the Frame

    The first step to professional truck frame repair is to remove any unnecessary pieces of metal, mounting brackets, or other items from the frame. This is important not only so you dont damage these pieces while you are performing the frame repair, but also so that you can check them for damage or other problems while off the vehicle. Make caul notes of what you have removed and where it goes so that youll be able to reassemble everything.

Sandblasting

    A key step in successful truck frame repair is to sandblast everything. Sandblasting is an abrasive process that allows for complete removal of rust, old paint and dirt from the metal, so that you can caully inspect the truck frame for hairline cracks or weaknesses. Mark any areas that you may need to repair or replace completely before continuing.

Remove Damaged Areas

    Remove any metal areas that are damaged, cracked, or rusted through. By using either a cutting torch, plasma arc cutter, grinder or similar tool, you can get rid of these areas and begin to template and replace them with fresh metal.

Read More.. >

Wednesday, February 26, 2014

Heavy Truck Front End Alignment Tools

Heavy Truck Front End Alignment Tools

Many auto repair shops are equipped to perform alignment adjustments on regular cars and trucks, but aligning the front ends of buses, RVs or heavy-duty trucks often requires the use of specialized tools. The types of tools used include primary tools such as alignment gauges and axle-correction tools, as well as an array of supplemental tools like wheel-rim straightening tools, wheel-weight tools and lug-nut-cover tools. Adjusting the alignment of a heavy vehicle is not something an amateur should attempt, especially since most shops rely on heavy-duty lifts or a pit to access the underside of vehicles.

Alignment Guages

    Because accurately measuring the angles of several aspects of a wheel, particularly the caster, camber and toe, is crucial to correcting the alignment, alignment gauges are perhaps the most important tool when aligning the front ends of heavy-duty vehicles. Companies such as Specialty Products Company, Josam and Bee Line sell manual, computerized and laser alignment gauges. Specialty Products Company offers manual heavy-duty gauges for around $200, as of December of 2010, while Bee Line offers portable and stand-alone computerized gauging systems that use laser measuring the company claims is accurate to 1/1000 of an inch. Bee Line must be contacted for pricing on its computerized systems, and these systems may require additional tools, accessories and training.

Axle Correction Tools

    Axle correction is the only way to adjust the camber to the ideal settings on heavy-duty vehicles such as semi tractors. Bee Line and Josam offer portable and pit-based axle-correction tools capable of applying up to 130 tons of pressure to the axle in order to adjust the camber. Axle-correction tools consist of a steel beam with hydraulic rams connected to it. The beam of the tool is fastened to the axle, and the hydraulic rams extend, applying tons of pressure and bending the axle.

Other Tools

    There are a wide array of other tools that can be necessary or beneficial to adjusting the alignment of a heavy-duty truck, depending on the vehicle and the types of adjusts being made. Turntables make it easier to move heavy-duty alignment systems from bay to bay or from location to location. Slip plates allow a wheel to move freely while it is being adjusted. A tandem axle caliper can be used to measure the distance between axles of a semi-tractor. A rim-straightening tool can be sued to manually straighten dents and bends in wheel flanges or rims.

Read More.. >

Sunday, November 10, 2013

How to Compare Toyota Truck Engines

If you want to upgrade or replace your Toyota truck engine, you should do a comparison first to make sure that you are getting the right engine at the right price. Whether youre buying a brand new Toyota truck engine or a used one, there are a few key criteria that you should consider when reviewing your options. Naturally there are some Toyota truck engines that will be unsuitable, such as diesel engines if you have a gasoline-powered vehicle, or low-torque engines if you have a large truck, or an extra-large engine if your pickup is compact. Be certain what characteristics you want from your engine before beginning your comparison process.

Instructions

    1

    Eliminate all unsuitable engines from your initial search. You should use the manufacturers website and those of pickup engine parts dealers to review engine specifications. To save time, make a list of engine types that are unsuitable. Write them down and discount them from your comparison process. For example, if youre buying an engine from a vehicle with right-hand drive, youll have to move the mounting struts and power steering pump to fit a left-hand-drive vehicle, which is a lot of work. Toyota stopped producing diesel pickup engines for the American market in 1986, so only very old engines will be available for diesel vehicles.

    2

    Set out your key criteria. In order to do a successful comparison, you need a starting point. Toyota truck engines come in different sizes and designs, so understand what you require. Write down a list of the three most important things that youre looking for in an engine. For example, you may wish to purchase a 2.0-liter engine with low mileage for no more than $600. So engine size, mileage and price are your three main criteria. There are certain Toyota truck engines, such as the 22RE and the L series diesel, that share the same mounting, spacing and transmission bolt patterns. Such compatibility makes for an easier installation.

    3

    Research recall history. For example, in 1996 Toyota recalled its 3.0-liter V6 engines made between 1988 and 1995 due to head gasket design flaws. Toyota repaired many of the engines that were returned, but double-check to ensure that the engine youre considering has been checked over.

    4

    Establish a ranking system. Rank your three main criteria in order of importance. When reviewing Toyota truck engines, rank them in the following method. Award a score of 1 to 20 for how the engine measures up against your top criterion, a score of 1 to 10 for the second criterion and a score of 1 to 5 for the third criterion. This gives a more accurate reflection of engine suitability when you add up the final scores.

    5

    Total up the final scores. Each engine will have a score thats as low as 3 or as high as 35; the engine with the highest mark is, ostensibly, the most suitable. If you have more than one engine with the same marks, use the other characteristics to break the deadlock. Quite often youll need to arrange delivery of the engine, speak to the retailers and find out who offers the cheapest or fastest delivery.

Read More.. >

Tuesday, October 8, 2013

How to Fix a Windshield Washer Pump on a 1997 Chevy C 1500 Truck

When the windshield washer pumps fail on a 1997 Chevrolet Silverado 1500, the windshield washer system cannot transfer fluid through the system tubing in order to clean the windshield. These pumps, located in the windshield washer tank, are the sole components responsible for moving fluid throughout the entire system. These pumps operate by running off the vehicles 12 volt electrical power supply. When the wash section of the windshield wiper arm is depressed, the wiper motor relay switches to a closed position allowing current to flow to the washer pumps. In the event of a pump failure, current still flows to the pump, but they will not operate.

Instructions

Removal

    1

    Remove the bolts holding the washer tank area cover to the truck with a metric ratchet and socket. Remove the two bolts holding the washer tank to the truck body with a metric socket and ratchet.

    2

    Unplug the upper pump hose from the vehicle. Disconnect the electrical connector from the truck to the pump assembly. Lift the washer tank out of the truck. Pour the washer fluid from the tank into a drain pan.

    3

    Pry the washer pump cover away from the washer tank with a flat-head screwdriver, and then set it aside. Disconnect the electrical connectors from the washer pumps. Disconnect the washer pump hose from the individual washer pumps.

    4

    Twist and pull on each washer pump to remove it from its mounting grommet.

Installation

    5

    Set the new washer pumps into position and press down on them until they are completely seated in the rubber grommet holes. Reconnect their electrical connectors. Reconnect the wash pump hose to each pump.

    6

    Snap the pump cover onto the washer tank. Set the tank back into the truck and reinstall the bolts holding the tank to the truck. Torque the bolts to 53 inch-pounds with a torque wrench. Reconnect the upper pump hose to the hose running to the washer jets.

    7

    Refill the washer tank with new fluid and close the cover. Set the washer tank area cover into place and reinstall the bolts holding it in place with a metric socket and ratchet. Test the washer pumps.

Read More.. >

Monday, September 16, 2013

How to Install a Windshield in a 1983 GMC Truck

How to Install a Windshield in a 1983 GMC Truck

You can install a windshield in your 1983 GMC truck right in your driveway, saving you time and money. Besides keeping you safe from rocks and other road debris, your trucks windshield helps keep the roof from caving in if the truck should roll over. Since the windshield serves such a vital function, it is very important to replace it when it becomes cracked or chipped. If you dont replace it, the windshield may eventually shatter. Save some money and try to locate a GMC truck windshield from an auto wrecking yard.

Instructions

    1

    Remove one of the base screws on the rear view mirror with a flat head screwdriver and slide the mirror out of its bracket.

    2

    Pry off each windshield wiper by inserting the screwdriver between the retaining nut and the wiper arm and rocking it back and forth until it comes off. Set the wipers aside.

    3

    Tape up the dashboard vents to prevent small pieces of glass from getting inside.

    4

    Remove the rubber gasket from around the windshield with a razor knife. Push the windshield out of the GMC truck from the inside out. Have an assistant catch it from the outside.

    5

    Clean all the parts with a wet cloth, including the gasket, frame and dashboard. Put the new gasket in a warm, sunny place to make it more flexible.

    6

    Apply a layer of sealant to the bottom part of the gasket channel. Slip the gasket around the windshield. Make sure you put the side with the slit facing outside of the truck.

    7

    Wipe petroleum jelly into the gaskets groove and slip a nylon cord into the groove. Work your way from the bottom center part of the gasket all the way around, making sure to leave at least a foot of cord hanging out on each end.

    8

    Mount the windshield into the trucks windshield frame from the outside of the vehicle. Make sure you leave the rope ends hanging inside of the truck.

    9

    Pull on one of the cord ends slowly to bring the lip of the gasket inside the truck. Instruct your assistant to push the gasket onto the frame from the outside while you tug on the cords from inside the truck. Allow the sealant to cure for at least 12 hours before driving.

Read More.. >