Monday, November 17, 2014
Where Is the Fuel Pump Switch on a 1991 Ford Explorer
The fuel pump switch is also known as the inertia switch, a device that prevents fuel from going to the engine if your 1991 Ford Explorer happens to get into a collision. It also enables the fuel pressure to be relieved.
Location
The inertia switch can be found mounted on the floor pan on the passenger side inside your Explorer; look below the heater unit. It will have an electrical connector attached to it.
Servicing the Fuel System
Disconnect the electrical connector that is attached to the inertia switch when performing a task such as relieving the fuel pressure on your Ford Explorer. Whenever youve finished servicing the fuel system, reattach the electrical connector to the switch. You do not need any tool for removing and attaching the connector.
Reset Button
The inertia switch also has a reset button at the top to use in the event the switch was activated during a procedure like relieving the fuel pressure, which would create a popping-like sound. Simply push the button to reset the switch if this occurs.
Saturday, June 7, 2014
The 1991 GM Cadillac Fleetwood Fuel Pump Pressure Specs
First introduced in 1947, the Fleetwood is a luxury four-door sedan manufactured by Cadillac in America. Powered by big and powerful V6 and V8 engines, Fleetwood is equipped with a modern twin-turbine fuel pump that delivers enough fuel to feed the needs of this car.
Fuel Pump Operation
The fuel pump is an electric medium-pressure twin-turbine pump which is mounted to the fuel level meter assembly in the fuel tank. The fuel pump delivers pressurized fuel from the pump through an in-line filter to the throttle body injection (TBI) unit and injectors. The electric fuel pump operation is controlled by the electronic control module (ECM) through a fuel pump relay.
Fuel Pump Pressure Specifications
Cadillac Fletwoods fuel pump operates in the range of 62 to 90 kilopascals (9 to 13 pounds per square inch) of pressure when the engine is running.
Part Replacement
The fuel pump is still supplied by Cadillac and is priced at $77.98, as of late 2010. The OEM part number is 25168719.
Tuesday, May 20, 2014
The Battery Specifications for a 1991 Honda Accord Station Wagon Ex
The Honda Accord EX wagon was introduced in 1991. The EX was the upmarket version of the Accord wagon, with a 140-horsepower engine and four-wheel anti-lock disc brakes. Accord wagons are known for their reliability, but most owners will need to purchase at least one new battery during their cars lifetime.
About Batteries
Most cars require a 12-volt, six-cell, negative grounded, lead-acid battery. Batteries are produced by a number of manufacturers. Batteries differ in their cold-cranking amps and reserve capacity. BatteryFAQ.org recommends buying a battery with the maximum available reserve capacity and the maximum cold-cranking amps for your climate. Cold-cranking amps (CCA) can vary from 450 to 850. If you live in a colder climate, you should choose a battery rated with greater CCA.
Battery Size
Batteries are classified into "BCI group numbers," commonly erred to as "sizes." The numerical battery size, such as 24, 35 or 75, takes into account the physical dimensions of the battery, whether the terminals are on the top or side, and its polarity. The 1991 Honda Accord EX wagon requires battery size 24. Size-24 batteries are no larger than 10.25 inches in height, 6.8125 inches wide, and 8.875 inches long. Be caul not to buy a size-24F battery, which would have the terminals reversed.
Battery Freshness
Batteries are stamped with a manufacturing date. Since batteries are perishable, you should always select a battery produced within the last year. BatteryFAQ.com recommends only purchasing a battery manufactured in the last six months.
Saturday, February 1, 2014
How to Change the Fuel Pump in a 1991 Z28 Camaro
The Chevrolet Camaro is a muscle car that has been in continuous production since 1967. The 1991 Z28 Camaro is a third-generation Camaro, which Chevrolet made from 1982 to 1992. This was the first generation of Camaros to come equipped with fuel injection. The 1991 Z28 Camaro used multi-port fuel injection, which requires a high-pressure fuel pump. The replacement fuel pump for this car must match the engine, which may be an eight-cylinder 5.0-liter engine or an eight-cylinder 5.7-liter engine.
Instructions
- 1
Disconnect the cable for the negative terminal on the battery, using a socket wrench. Loosen the filler cap on the fuel tank to relieve the pressure in the fuel tank.
2Place a siphon hose into the filler neck of the fuel tank. Siphon as much fuel as possible into a container approved for gasoline. Raise the vehicle on jack stands. Remove the neck shield for the fuel filler, and remove the rear axle. Disconnect the bolts for the exhaust pipes with a socket wrench, and remove the exhaust pipes from the exhaust manifold. Disconnect the heat shield for the exhaust system with a socket wrench. Clean the pipes and hoses for the fuel system around the fuel tank with a shop rag. Locate the fuel sender assembly on the fuel tank. The main body of this unit is inside the fuel tank, while its hose and electrical connectors are accessible from the top of the fuel tank. Disconnect the hoses to the fuel sender assembly, and detach the electrical connection for the fuel sender. Support the fuel tank, and remove the bolts for the fuel tank straps. Remove the fuel tank straps and fuel tank from the vehicle.
3Clean the area around the fuel sender assembly with a shop rag. Turn the retaining cam on the fuel sending unit counter-clockwise with tool J-24187, and remove the retaining cam. Remove the fuel sending unit from the fuel tank, and discard the O-rings. Detach the fuel pump from the fuel sending unit.
4Attach the new fuel pump to the fuel sending unit. Place a new O-ring in the groove on the fuel tank, and place another new O-ring on the feed tube of the fuel sender unit. Ensure that the strainer on the fuel pump is horizontal and does not impede the movement of the float arm on the fuel sender unit. Fold the strainer caully to avoid damage as you place the fuel sending unit into position on the fuel tank.
5Fasten the retaining cam onto the fuel sender unit by turning it clockwise with tool J-24187. Connect the heat shield and exhaust pipes for the exhaust system. Connect the fuel tank and lower the vehicle. Fill the fuel tank and fasten the filler cap on the fuel tank. Connect the cable for the negative terminal on the battery with a socket wrench.
Sunday, January 19, 2014
Taillight Installation on a 1991 Volvo Wagon
Replace the taillights of your 1991 Volvo station wagon with new PB17916 dual filament bulbs if one stops working. You can buy these bulbs at any auto parts store, and they are usually in-stock items. You wont need any tools, and you can access the spent bulbs from the cargo area of the car through an access panel directly behind the lights. On some models, you may need to remove the spare tire to open the right-side access panel.
Instructions
- 1
Open the rear lift gate of your Volvo wagon and locate the access panel just inside the gate opening directly behind each taillight in the cargo area. Turn the two retaining clips on the access panel to open it.
2Locate the bulb holder inside the access hole and release the retaining clips on either side of the holder. Pull the holder straight out of the taillight housing and turn it so the bulbs are facing you.
3Push in slightly on the bulb while rotating it counterclockwise, then remove it from the holder and discard it. Install a new BP17916 bulb; press in on the bulb and rotate it clockwise to lock it in place.
4Insert the bulb holder into the back of the taillight assembly, pushing it in until the locking tabs snap in place. Close the access panel and turn the two retaining clips to secure the cover.
5Close the rear lift gate and test the repair by turning on the headlight switch or pushing the brake pedal while someone monitors the taillight function.
Wednesday, December 18, 2013
How to Replace the Fuel Pump in a 1991 Nissan 240SX
The 240SX is a two-door compact car that Nissan sold in North America from 1989 to 1998. The 1991 model belongs to the first generation of the 240SX that was in production from 1989 to 1995. These vehicles were equipped with a 4-cylinder, 2.4-liter engine that uses sequential fuel injection. This type of fuel injection uses an electric fuel pump to deliver fuel at high pressure. The fuel pump for the 1991 Nissan 240SX is accessible from the trunk of the vehicle.
Instructions
- 1
Remove the fuse for the fuel pump from the fuse box under the dashboard. Start the engine and let it run until it stalls. Crank the engine twice to relieve the pressure in the fuel system. Turn the ignition off, and replace the fuse for the fuel pump.
2Disconnect the cable for the negative terminal on the battery with a socket wrench to prevent accidental sparking. Open the rear trunk and disconnect the electrical connector for the fuel gauge. Remove the cover for the fuel tank. Disconnect the fuel lines from the fuel pump assembly.
3Remove the retaining bolts for the fuel pump assembly with a socket wrench. Lift the fuel pump assembly out of the fuel tank, and discard the O-ring on the fuel tank. Plug the resultant opening in the fuel tank with a clean shop rag to keep dirt out of the fuel tank.
4Remove the shop rag from the fuel tank opening. Install a new O-ring onto the fuel tank. Place the new fuel pump assembly into the fuel tank, and fasten the fuel pump assemblys retaining bolts with a socket wrench. Attach the fuel lines and electrical connection, and replace the cover for the fuel tank.
5Connect the cable to the negative terminal of the battery with a socket wrench. Start the engine and check the fuel system for leaks.
Saturday, October 19, 2013
How to Replace the Fuel Pump on a 1991 525 BMW
The BMW 5 series of vehicles consists of midsize cars and has been in production since 1972. The 1991 BMW 525 has a BMW M50B25 engine, which is a 6-cylinder 2.5L engine generating 189 horsepower. This engine uses fuel injection, which requires the fuel pump to deliver fuel to the injectors under high pressure. The fuel pump in the BMW 525 is attached to the fuel sender, and is accessible from the trunk of the vehicle.
Instructions
- 1
Drain the fuel from the fuel tank, so that the tank is no more than 1/4 full. Remove the panels in the trunk to expose the access cover in the front right corner of the trunk. Unfasten the mounting screws for the access cover with a socket wrench, and remove the access cover. Disconnect the fuel lines and the electrical connector from the fuel sending unit.
2Attach tool 16 1 020 to a socket wrench and use it to turn the large mounting ring on the fuel sending unit counterclockwise. Remove the mounting ring from the fuel sending unit. Discard the gasket on the fuel sending unit.
3Pull the fuel sending unit from the fuel tank without spilling the fuel in the fuel sending unit. Squeeze the mounting hooks on the fuel pump to remove it from the fuel sending unit. Disconnect the fuel hoses and electrical wiring from the fuel pump. Turn the pressure damper on the fuel pump counterclockwise, and remove it from the fuel pump. Remove the fuel pump from its holder. Loosen the mounting screw for the fuel filter, and remove the fuel filter from the fuel pump.
4Connect the fuel filter on the bottom of the new fuel pump, and place the fuel pump into its holder on the fuel sending unit. Connect the pressure damper to the fuel pump. Attach the fuel lines and electrical wiring to the fuel pump. Attach the fuel pump to the fuel sending unit by securing the fuel pump with the mounting hooks.
5Install the new gasket for the fuel sending unit and mount it to the fuel tank. Attach the mounting ring to the fuel sending unit, and tighten the mounting ring to between 27 and 31 foot-pounds with tool 16 1 020. Connect the fuel lines and electrical wiring to the fuel sending unit. Replace the trunk access cover and trunk panels.