Find solution

How to Pull Codes From a 1995 Chevy

You can pull the codes from your 1995 Chevy right in your garage, saving you time and money. When your Chevy is having problems, you might see a warning light such as "Check Engine" illuminate on its instrument cluster. This light ers to a problem with one of the vehicles sensors. Before repair the vehicle, you must troubleshoot the problem with an OBD I scan tool you can purchase from your local auto parts retailer.

Instructions

1

Park the vehicle and turn off the ignition. Find the open OBD port under the steering column. Plug the OBD I scan tool into the open port.

2

Put the key into the ignition and turn it to the "ACC" position and do not start the engine.

3

Turn on the OBD I scan tool and wait for it to read the codes.

4

Wait for the display on the OBD I scan tool to read "OK," then turn off the ignition and the scan tool.

5

Select the "Menu" command and scroll through it until you see "Stored Codes." Select this option and write down the alphanumeric codes on a piece of paper.

6

Look up the codes in the scan tools manual. Unplug the scan tool and have your Chevy serviced or repaired according to the diagnostic codes.

Posted by Unknown at 6:15 AM

Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest

Labels: 1995, a, chevy, codes, from, how, pull, to