Showing posts with label i30. Show all posts
Showing posts with label i30. Show all posts

Tuesday, January 14, 2014

How do I Reset the Airbag in a 1998 Infiniti I30

How do I Reset the Airbag in a 1998 Infiniti I30?

When your Infiniti I30s diagnostic system detects a malfunction with the vehicle, it issues an error code. The SRS, or Supplemental Restraint System, light illuminates as a result of an error code related to the airbag system. You can disconnect the battery to reset the light but this resets the entire computer, so thats not the best option. Or you can obtain an OBD II scanner from an auto parts store to reset the computer and shut off the SRS light. This is the preferred way and takes just a few minutes of your time. Only reset the airbag after it has been inspected and, if necessary, repaired by a qualified mechanic.

Instructions

    1

    Locate the OBD port under the dashboard near the steering column.

    2

    Plug the OBD-II scanner into the OBD port, then power on the scanner.

    3

    Put the key into the ignition and turn it to the "On" position.

    4

    Wait for the error code to display on the face of the scanner. Select the "Erase" or "Clear" codes command. Wait while the scanner clears the code and returns to the main menu.

    5

    Unplug the scanner and start the engine. Verify that the SRS light has shut off of the instrument panel. The airbag is now reset.

Read More.. >

Wednesday, November 27, 2013

2000 Infiniti I30 Wont Start

2000 Infiniti I30 Wont Start

The Infinity I30 is a four-door sedan designed as a luxury car. If you are having problems starting your Infinity I30, you will need to check the battery. The battery is the most common reason that a car will not start. Corrosion can build up on the battery terminals and leave them inoperable. Cleaning the corrosion and then jump-starting the battery will tell you if you need to replace the battery all together.

Instructions

    1

    Open the hood to your I30 and locate the battery. The battery is next to the engine.

    2

    Disconnect the battery terminals from the battery. Clean the terminals with soda and a wire brush to clean the corrosion off.

    3

    Put the terminals back onto the battery and then start the I30.

    4

    Jump start your I30 with jumper cables. Allow the car to sit for about 5 minutes and then turn it off.

    5

    Restart the car. If the car will not restart, replace the battery.

    6

    Check the fuel level in the car. Add fuel and then start the car.

Read More.. >

Wednesday, October 9, 2013

How to Wire a Power Seat in a 2000 Infiniti I30

The Infiniti I30 was Nissans first serious entry into the luxury-car market. Hoping to emulate Toyotas success with the Lexus brand, Nissan up-contented their basic cars into luxury offerings. The I30 was essentially a re-badged Nissan Maxima with an upgraded interior and a more supple ride. Power seats were standard and allowed driver and passenger to change the position of their seats with the press of a button. However the motors in these seats can burn out and a replacement seats need to be wired into place.

Instructions

    1

    Drive the Infiniti I30 somewhere flat and with ample room to the drivers side. Car seats are bulkier than they look and having the flat ground helps keep the seat from sliding around on the rails. Put the Infiniti into "Park" and pull the emergency brake up before turning the car off. Pull the hood latch and go around to the front of the car. Open the trunk hood up and disconnect the black wire from the car battery.

    2

    Turn the power button to off on the underside of the power seat. Push the seat forward and unbolt the two rear retaining bolts on each rail. Move the seat to the rear and unbolt each bolt on the front of the rails. Pull them up and off, but not out of the car. Disconnect the power wire from the bottom of the seat, then take the seat out. Pull the runner assembly off the rails and disconnect the power wire from the gear box.

    3

    Pull the carpet flap off the bottom of the power seat and disconnect the wiring harness from each motor. Pull the carpet flap off of the new power seat and plug the wiring harness into the bottom of the seat. Slide the carpet flap back over so that only the single power port is left out at the rear.

    4

    Slide the runners at the bottom of the seat onto the rails. Bolt in the retaining bolts at the rear and then at the front of the seat. Plug the power cord coming from the floor into the port coming from the wiring harness. Reconnect the black wire to the car battery, shut the hood and turn the car back on. Test the Infinitis power seat by moving it forward, back, and angle it forward and to the rear.

Read More.. >