Saturday, May 17, 2014
How to Install a Timing Belt for a 2000 Ford Focus
The Ford Focus is a compact car that Ford began manufacturing for the 2000 model year in North America. The engine for a Ford Focus made before 2005 is a four-cylinder 2.0-liter engine with a double overhead camshaft. This type of engine uses a timing belt instead of a timing chain, and requires you to replace the timing belt at regular intervals. The timing belt for a 2000 Ford Focus allows the crankshaft to turn the camshaft.
Instructions
- 1
Remove the cable from the negative battery terminal with a socket wrench to prevent you from inadvertently starting the engine. Disconnect the accessory drive belt and its tensioner. Remove the cover for the timing belt.
2Loosen the lug nuts for the right front wheel with a lug wrench. Raise the vehicle and support it on jack stands. Remove the right front wheel and the right splash shield with a socket wrench. Disconnect the pulley for the crankshaft.
3Turn the timing belt clockwise so that the timing marks on the camshaft and crankshaft sprockets align with their respective marks on the engine.
4Loosen the bolt for the timing belt tensioner with a socket wrench. Turn the tensioner 1/4 turn counterclockwise with an 8mm Allen wrench. Place a 1/8 in. drill bit into the hole of the timing belt tensioner to hold the tensioner in place. Remove the timing belt from the camshaft sprocket and crankshaft sprocket.
5Place the new timing belt on the crankshaft. Complete the timing belt installation by proceeding in a counterclockwise direction. Remove the drill bit from the timing belt tensioner hole to release the tensioner.
6Turn the crankshaft clockwise by two complete turns to align the timing marks once again. Tighten the bolt for the timing belt tensioner to between 15 and 22 pounds with a torque wrench.
7Connect the crankshaft pulley and tighten its mounting bolt to between 81 and 96 ft. lbs. with a torque wrench. Connect the right splash shield and right front wheel with a socket wrench.
8Lower the vehicle and tighten the lug nuts with a lug wrench. Install the accessory drive belt and its tensioner with a socket wrench. Attach the cable to the negative battery terminal.
Friday, May 16, 2014
How to Replace the Timing Belt on a 2003 Ford Focus
Ford started production of the Ford Focus in 1999. The models made from 1999 to 2007 were the first generation of this series. The standard engine in the 2003 Focus has four cylinders and a displacement of 2.0 liters. The timing belt on this vehicle synchronizes the movements between the crankshaft and the camshaft. The tension on the timing belt is a critical factor in its installation.
Instructions
- 1
Open the hood. Disconnect the negative battery terminal with socket wrench. Turn the drive belt tensioner clockwise to reduce the tension on the accessory drive belt. Remove the drive belt. Disconnect the tensioner with a socket wrench. Remove the timing belt cover.
2Raise and support the vehicle on jack stands. Remove the right front wheel with a lug wrench and disconnect the right splash shield. Remove the pulley for the crankshaft.
3Turn the crankshaft clockwise to align the timing marks on the crankshaft and camshaft sprockets. Loosen the tensioner bolt on the timing belt with a socket wrench. Turn the tensioner counterclockwise by 1/4 turn with an 8mm Allen wrench. Place a 1/8-inch drill bit into the hole on the timing belt tensioner to hold the belt tensioner in place. Remove the timing belt.
4Install the new timing belt onto the crankshaft by proceeding in a counterclockwise direction. Remove the drill bit from the hole in the timing belt tensioner. Turn the crankshaft clockwise by two turns so that the timing marks align once again. Torque the tensioner bolt for the timing belt to between 15 and 22 foot-pounds with a torque wrench.
5Install the crankshaft pulley with a socket wrench and tighten its mounting bolt to between 81 and 96 foot-pounds. Connect the right splash shield and the right front wheel. Lower the vehicle and replace the timing belt cover. Install the accessory drive belt tensioner and mount the drive belt. Attach the cable to the negative battery terminal.
Monday, April 28, 2014
Alignment Specifications for a 2002 Ford Focus Wagon SE
The Focus is a front-wheel drive economy car introduced by Ford in 2000. It is a "world car" sold with the same basic body type across the globe, with only minor changes made to its handling and steering in some markets outside the United States. It was the first vehicle produced under Fords newly-developed global development strategy, which sought to streamline production and reduce costs. The Focus quickly became one of Fords best-selling cars worldwide.
The Focus retained its original body and design until 2008, when Ford revamped it and introduced the second generation of the vehicle. In 2002 the Focus was available as a 3-door hatchback, a 4-door sedan, a 5-door hatchback or a wagon.
General Alignment Information
The alignment specs for all trims of the 2002 Ford Focus wagon are the same. However, the alignment specs for the 2002 Ford Focus wagon trims do not apply to the other trims of the vehicle for that year. The caster, camber and toe-in are adjustable on the front wheels of 2002 Ford Focus wagons. The camber is not adjustable on their rear wheels.
The aligning of the caster of a vehicle can be a tricky task. It is always best to consult an owners manual or a certified mechanic before attempting to perform your own auto repairs. For more information on vehicle alignment, see the article "A Short Course on Wheel Alignment" linked in the Resources section below.
Front Wheel Specs
The limits for the caster angle of the front wheels of the 2002 Ford Focus are +1.87 to +3.89 degrees, with the ideal angle being +2.88 degrees.
The limits for the camber angle of the front wheels are -1.89 to +0.63, with the ideal angle being -0.63 degrees.
The toe-in can range, by degrees, from -0.12 to +0.12, with the ideal being zero.
Rear Wheel Specs
The limits for the caster angle of the rear wheels for the 2002 Ford Focus wagon are -2.22 to +0.34, with the ideal angle being -0.94 degrees.
The toe-in for the rear wheels can range, by degrees, from +0.3 to +0.7, with the ideal being +0.5
Friday, October 4, 2013
Repair Issues With a Ford Focus
The Ford Focus is a car that has been available in the United States since the late 90s. Since then, owners have shared common issues with it, along with suitable fixes. Contact switches, fuel gauges, and brake pedals are all parts that have caused repair issues for Ford Focus drivers.
Contact Switch Repair
Interior lights in the Ford Focus may fail to turn off although all doors have been closed. A faulty contact switch in the lock striker is the cause. To repair this issue, you can replace the lock striker with an upgraded one that possesses revised contact switches.
Fuel Gauge Repair
Sometimes a Ford Focus will still give an empty fuel reading even though youve just pumped a full tank of gas. When this happens, a bad fuel pump module is often to blame. To fix this issue, you will have to replace the fuel level sender card assembly with a revised version.
Brake Pedal Repair
Some Ford Focus drivers have had problems with hard braking at the outset of a drive. Youll need a revised brake booster vacuum hose, as this will correct the problem of reduced assistance from the brake booster. Youll also have to reprogram and reset the Powertrain Control Module.