Find solution

Removing the front seats from your Ford Escape may be necessary if the seats need replacing, the carpet need to come out, or if you wish to replace the seats with aftermarket models. Damage to the seats or tracks can make them unstable, making safety of the seats a concern or affecting their comfort. Replacement seats are available from the Ford dealer or through some specialty auto-parts suppliers.

Instructions

1

Locate the seat adjuster on the outside edge of the seat. Move the seat all the way forward, then locate the two retaining bolts that secure the seat track to the floor behind the seat. Remove both bolts with a socket and ratchet, setting the bolts in a safe place for reuse later.

2

Move the seat to the rear until it is all the way back, then locate the front mounting bolts under the seat. Remove the bolts from the floor and mounting brackets with a socket and ratchet. Set the bolts aside for now.

3

Raise the front of the seat and locate the wiring harness connection under the seat. Depress the locking tab on the connector and separate the wiring harness pigtail from the connection on the base of the seat.

4

Lift the seat and caully remove it through the door opening. Set it aside, keeping it off the ground, in a dry location. Repeat the process to remove the second seat from the front of your Escape, if required.

The 2005 Ford Escape is a compact SUV sold by the Ford Motor Company. It was first presented to the public in 2000 for the 2001 model year. Even though the Ford Escape was considered to be one of the best-selling SUVs in America, according to the Edmunds website, it is not without its problems. However, if you have the right tools and information, you should be able to troubleshoot your 2005 Ford SUV.

Instructions

1

Check your Ford Escape for starter problems. Listen for grinding noises from the starter. If your SUV will not start or the dashboard will not light up, your battery may be dead and need to be charged or replaced. Also check the battery cables to see if they need to be connected more securely to the battery.

2

Check your engine oil. If you have an change oil sticker in the upper left corner of your cars window, check to see if the oil change date is overdue. If your oil change is overdue, make an appointment to receive an oil change to avoid problems. If you dont have a sticker, check your oil by using the oil dipstick under the hood of your SUV. Pull the stick out, wipe it clean with a cloth. Place the stick back into the slot and check the gauge on the stick to see if your oil is too low. You can either add the required oil that your car needs or decide that its time for a complete oil change.

3

Listen for screeching sounds that may be coming from your vehicles engine while your engine is on. If you can hear whining sounds coming from the engine after you turn it on, you may need to replace the power steering pump.

4

Check to see if you can hear any knocking noises coming from your engine when driving at low speeds. If you hear knocking noises, have a professional mechanic check out your cooling system, the air-fuel mixture in the combustion chamber and transmission.

The 2003 Ford Escape is a small sports utility vehicle that features a V6 engine, large cargo capacity and manual transmission. The vehicle is considered a combination between an SUV and a mid-size car. As an Escape owner, you may experience problems intermittently with the vehicle. You can troubleshoot some of the most common problems without being a certified mechanic. In fact, basic troubleshooting of your Ford Escape may save you the expense of consulting an automobile repair specialist.

Instructions

Oil Pressure Indicator Light

1

Turn off your 2003 Ford Escape and raise the hood.

2

Locate and remove the oil dipstick near the engine. The dipstick will be labeled "Oil."

3

Wipe the dipstick clean with a paper towel or rag. Reinsert the dipstick in its hole.

4

Remove the dipstick again and check for the oil level.

5

Add more oil with a funnel if the oil level does not reach at least halfway to the fill line on the dipstick. Replace the dipstick and lower the hood.

Fuses

6

Locate the fuse box on the dashboard of the Ford Escape.

7

Remove the cover of the fuse box and review the diagram on the inside cover.

8

Locate the position of the electrical part that is not working. For example, if your radio is not working, the fuse for it is located in slot 12.

9

Remove the fuse with your index finger and thumb or pliers. If the metal link inside the fuse is separated or broken, the fuse is blown.

10

Insert a new fuse in the slot and replace the fuse box cover.

Overheating

11

Turn off your Ford Escape and allow the vehicle to cool.

12

Raise the hood and locate the coolant reservoir. The reservoir is located on the left side of the Escape.

13

Wipe the area around the reservoir cap. Remove the cap slowly.

14

Compare the amount of coolant in the reservoir to the fill line on the side.

15

Add more coolant and replace the reservoir cap.