Find solution

How to Remove the Overhead Console on a 2003 Dodge Ram

Removal of the overhead console in your Dodge Ram will allow access to the electronics and light assemblies mounted in it. The console comes out without much effort and its removal does not require any special tools. There are several wiring connections under the console to disconnect before removal of the console, but they are readily accessible once the mounting hardware is removed. If your vehicles console is damaged, replacements are available from the dealerships parts department.

Instructions

1

Disconnect the negative battery cable from the battery by removing the retaining bolt on the cable end with a wrench, then isolate the cable end from the battery. Move inside the truck and open the sunglasses storage bin.

2

Locate the screws inside the storage bin and remove them with a Phillips head screwdriver. Set the screws aside for later use.

3

Grasp the sides of the console with your hands, then pull straight down on it until the two clips under the console release. The console may come off suddenly, so beware that you are not directly under it.

4

Slide your hand in under the console and disconnect the EVIC, CMTC and lamp connections from the back of the console. Lower the console and remove it from the truck.

Posted by Unknown at 8:00 AM

Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest

Labels: 2003, a, console, dodge, how, on, overhead, ram, remove, the, to