Showing posts with label vw. Show all posts
Showing posts with label vw. Show all posts

Sunday, May 4, 2014

How to Adjust the Clutch on a 1996 VW Jetta

Driving a VW Jetta with a manual transmission can be fun, and it gives you more control over the car. You can use the clutch to decelerate, lower the torque to the wheels, accelerate at higher rpm and even kill the engine. The whole system hinges on a clutch, which you use to change gears in the transmission and keep them from grinding each other during the speeding up and slowing down process of driving. If the clutch begins to feel less responsive or has too much slack, you may need to adjust it.

Instructions

    1

    Locate the clutch adjustment mechanism in the engine bay of the car.

    2

    Slide the locking strap down to the top of the mechanisms protective covering.

    3

    Compress the adjustment mechanism and hook the straps over the lugs protruding from the side.

    4

    Press the clutch pedal while someone else pulls the clutch cable, taking care to keep the adjustment mechanism compressed.

    5

    Unhook the locking mechanism straps and depress the clutch pedal several times until the tension is good.

Read More.. >

Wednesday, April 23, 2014

What Is a VW IRS Transmission

What Is a VW IRS Transmission?

A VW IRS, or Volkswagen independent rear suspension, transmission is a special type of transmission that can be found in several models of Volkswagen automobiles, particularly the Volkswagen Beetle.

History

    The IRS, or independent rear suspension, transmission system was first introduced to the automobile industry in 1968, coming included with the semi-automatic Volkswagen Beetle. In 1969, all Beetles in the United States were fitted with the IRS, and in 1971, other countries followed suit. In the years since then, the IRS has been become an automobile industry standard.

Function

    An IRS is a type of automobile suspension system that allows two rear wheels that are on the same axle to shift position vertically without affecting each others position. The wheels spin in unison with each other, but raising one wheel doesnt lower the other as it would if the wheels were linked.

Benefits

    One of the most important benefits of this type of transmission is that it provides a much safer, smoother ride and better handling. Because the IRS is set up so that the vertical movement of one wheel does not affect the vertical movement of the other, bumps in the road do not cause both wheels to shift.

Read More.. >

Tuesday, April 1, 2014

How to Replace a Headlight Bulb in an 06 VW New Beetle

How to Replace a Headlight Bulb in an 06 VW New Beetle

Headlight maintenance is an important part of driver safety, and failure to keep the headlights of a vehicle in working order may result in serious injury to the driver. However, replacing a headlight is usually simple. This is especially true for a 2006 VW Beetle.

Instructions

    1

    Open the hood.

    2

    Loosen the plastic housing surrounding the headlights by pushing back on the black lever above the headlights.

    3

    Remove the plastic housing.

    4

    Disconnect the electrical connector by clicking the tabs together and pulling it out gently.

    5

    Remove the headlamp unit from the vehicle.

    6

    Remove the black plastic tab on the back of the headlamp unit by pulling on it.

    7

    Remove the side clips on the headlamp unit and remove the wire clip securing the headlight bulb into place.

    8

    Pull the burned out bulb from the headlamp unit. Use a paper towel to install the replacement bulb by pushing it into the headlamp unit.

    9

    Reattach the wire clips and the side clips.

    10

    Lock the black plastic tab onto the back of the headlamp unit.

    11

    Reconnect the electrical connector by plugging it into the headlamp unit.

    12

    Place the unit back into the vehicle and reattach the plastic housing. Close the vehicles hood.

Read More.. >

Saturday, February 1, 2014

VW Jetta Electrical Problems

VW Jetta Electrical Problems

While Volkswagen is renowned for fine German engineering, one model in particular, the Jetta, is also known for its electrical problems. On the low-price end of VWs family sedans, the Jetta is a popular vehicle both in the U.S. and worldwide. If you are looking into purchasing a used Jetta, first do research on the year and model you are interested in, as there have been many recalls--mostly electrical.

Power Windows

    Some Jetta models have problems with power window wiring.
    Some Jetta models have problems with power window wiring.

    Power windows have been problematic for the Jetta. There have been issues with the wiring harness insulation being damaged, causing electrical shorts. In 1996, there was a recall of 1994 Jettas because of this issue.

Brake Lights

    Brake lights need to operate correctly when the driver touches the brake pedal.
    Brake lights need to operate correctly when the driver touches the brake pedal.

    Models produced between 1999 and 2005 have had recalls for faulty brake light switches. Malfunctioning brake light switches have caused problems in which the brake lights either fail to operate at all or they get stuck in the "on" position. If they fail to function, this could cause an accident. If the lights remain on while the car is off, this could drain the battery.

Antilock Brakes

    Some models, including the 2000 and 2001 models, have trouble with the antilock brakes short circuiting. Not only can a problematic antilock braking system be a nuisance and dangerous while driving, but this short can cause a vehicle fire. The recall for this issue was announced in early 2002, and owners were notified to bring their cars to a dealership to have the entire ABS control unit replaced.

Hazard and Flasher Lights

    It is important that hazard/flasher lights function properly in case of an emergency.
    It is important that hazard/flasher lights function properly in case of an emergency.

    Many Jettas in the early to mid-2000s also had recalls on the hazard lights. The wattage from the turn signal bulbs caused an electrical current overload, resulting in problems with the switch relays. The flasher lights and turn signals became operable intermittently or, over time, even completely inoperable. The recall advised replacement of the switch/relay kit to fix the problem.

Read More.. >

Wednesday, October 16, 2013

How to Reset an Airbag Light on a VW Transporter

How to Reset an Airbag Light on a VW Transporter

When the Supplemental Restraint System (SRS) light illuminates on your Volkswagen Transporter, it indicates a problem with the airbag that should be addressed immediately. If the light is on, it could mean that the airbag will accidentally deploy as you are driving. Or it could mean that the airbag wont deploy at all, even if you get into an accident. You need an SRS scan tool to read the airbag trouble codes and reset the computer. This will turn off the airbag light and enable the VWs airbag to function properly.

Instructions

    1

    Put the key into the ignition and turn it to the "On" position. Verify that the SRS light is illuminated on the instrument panel either as a solid or flashing light. Turn off the vehicle.

    2

    Locate the Data Link Connector (DLC) under the steering wheel. Plug the SRS scan tool into this port. The port has 16 pins. Turn the vehicle to the "On" position again.

    3

    Wait for the scan tool to display an error code. Look up the code in the scan tools booklet to understand what the code means.

    4

    Unplug the SRS scan tool and turn off the vehicle. Fix the problem with the SRS system as identified by the error code.

    5

    Repeat step 2 and then enter the error code into the scan tool to reset the VWs computer.

Read More.. >

Sunday, October 6, 2013

How to Reset the Engine Light on a 2001 VW Beetle

How to Reset the Engine Light on a 2001 VW Beetle

VW Beetles made after 1996 come standard with an On-Board Diagnostic Second Edition computer (OBD II). There are sensors positioned throughout the vehicle that monitor all the vital functions of the car and report back to the main computer in the form of trouble codes. If the check engine light wont turn off on your New Beetle, it is because it has not been reset or the problem that triggered the check engine light has not yet been fixed. Best thing to do is to buy or borrow a diagnostic code scanner, use it to read the trouble codes, look up what the trouble codes mean in a repair manual, have the Beetle repaired, then use the diagnostic code scanner to turn off the check engine light.

Instructions

    1

    Find the diagnostic port located under the dashboard and under the heating controls. Plug the connector end of the diagnostic code scanner into this port. Dont push it in too forcefully; just turn it until it fits. If you force it, you may bend the pins inside the plug.

    2

    Put the key into the ignition and turn it to "Run," but dont start the engine. This will power on the diagnostic code scanner.

    3

    Press "Scan for Trouble Codes" on the scanner. Wait for the scanner to do its work. When it has finished, press "Clear All Trouble Codes." Turn off the vehicle and disconnect the diagnostic code scanner. Wait a minute or two.

    4

    Turn on the engine and examine the instrument panel to make sure the check engine light has turned off. If it has not, the problem that triggered the light remains and needs to be fixed.

Read More.. >

Sunday, September 22, 2013

How to Restore a VW Beetle

How to Restore a VW Beetle

The Volkswagen Beetle is one of the most beloved cars in history with movies, traditions and games stemming from the small, economic German-made car. Perhaps best recognized because of the movie "Herbie," VW Beetles are easy to distinguish from other cars and are likely the most recognized model the German car maker ever made. VWs are known for their durability and long life, in addition to their compact size, but like other cars, get worn out over time and may need to be restored.

Instructions

    1

    Assess your VW Beetle to determine what will need to be restored. The level and methods of restoration will differ depending on the condition of your Beetle.

    2

    Start with the frame. Get underneath the car and figure out what kind of shape the frame of the car is in. Repair as needed, if possible, or scavenge for a new frame at a junkyard if its beyond repair.

    3

    Move up to the engine. If youre not overly mechanically inclined, consider taking the Beetle into a mechanic to have the engine looked over, repaired, cleaned and filters changed.

    4

    Restore the interior of your Beetle. Depending on the condition of your car, this may include several different processes. The upholstery may need redone. If so, there are companies that specialize in reupholstering vehicles or you can do it yourself by using a sewing machine, stretching pliers and hog ring pliers. Replace the dash, steering wheel or other interior items that need replaced.

    5

    Restore the exterior of your vehicle by either taking it to a professional or by doing it yourself. If you chose to do it yourself, sand the surface down with an electric sander and sand paper. Prime the beetle with primer and then sand it down again. Apply a coat of paint and let it dry. Apply additional coats of paint until the metal is completely covered and the shade is to your liking. Finish with a gloss coat to protect the paint and add depth to its appearance.

Read More.. >