Saturday, May 3, 2014
Jeep Commander Electrical Problems
Electrical problems in Jeep Commander vehicles have led to recalls by Chrysler and the National Highway Traffic Safety Administration (NHTSA) in 2008, 2009 and 2010. Registered vehicle owners should have received notification from the manufacturer with instructions on where to bring the recalled Jeeps for free repair.
WIN Module Defect
On May 6, 2010, Chrysler recalled 40,131 vehicles, including 2010 model year Jeep Commanders, for a Wireless Ignition Node (WIN) module exhibiting a binding condition of the solenoid latch. It is possible to remove the key from the modules ignition switch before the shifter goes into "park" mode, which may allow the vehicle to roll away and cause a crash.
Airbag Wiring Defect
On April 7, 2009, Chrysler recalled 4,314 vehicles, including certain 2009 Commanders, because a wiring defect may cause the drivers side airbag not to work properly. During manufacturing, the wiring was inadvertently reversed on the steering column control module driver airbag squib connector.
Front Control Module Defect
On February 5, 2008, Chrysler recalled 1,338 Jeeps, including 2008 Commanders, for a manufacturing defect in the front control module that could cause the engine to stall while driving or not to start. The electrical problem may cause the windshield wipers to stop working properly.
Saturday, February 1, 2014
VW Jetta Electrical Problems
While Volkswagen is renowned for fine German engineering, one model in particular, the Jetta, is also known for its electrical problems. On the low-price end of VWs family sedans, the Jetta is a popular vehicle both in the U.S. and worldwide. If you are looking into purchasing a used Jetta, first do research on the year and model you are interested in, as there have been many recalls--mostly electrical.
Power Windows
Power windows have been problematic for the Jetta. There have been issues with the wiring harness insulation being damaged, causing electrical shorts. In 1996, there was a recall of 1994 Jettas because of this issue.
Brake Lights
Models produced between 1999 and 2005 have had recalls for faulty brake light switches. Malfunctioning brake light switches have caused problems in which the brake lights either fail to operate at all or they get stuck in the "on" position. If they fail to function, this could cause an accident. If the lights remain on while the car is off, this could drain the battery.
Antilock Brakes
Some models, including the 2000 and 2001 models, have trouble with the antilock brakes short circuiting. Not only can a problematic antilock braking system be a nuisance and dangerous while driving, but this short can cause a vehicle fire. The recall for this issue was announced in early 2002, and owners were notified to bring their cars to a dealership to have the entire ABS control unit replaced.
Hazard and Flasher Lights
Many Jettas in the early to mid-2000s also had recalls on the hazard lights. The wattage from the turn signal bulbs caused an electrical current overload, resulting in problems with the switch relays. The flasher lights and turn signals became operable intermittently or, over time, even completely inoperable. The recall advised replacement of the switch/relay kit to fix the problem.
Monday, January 13, 2014
GMC Envoy Electrical Problems
Electrical problems in the GMC Envoy have led to several recalls since 2004. Manufacturing defects in the wiring and sensor systems of these vehicles could potentially affect the operation of the cars exterior lighting, air bags and windshield wipers.
Exterior Lighting
General Motors recalled 871,473 model year 2002-2004 GMC Envoys in 2004 for electrical problems in the brake lights and rear turn signal lamps. Subsequently, 286,478 model year 2003-2004 GMC Envoy vehicles were recalled in 2005 for an electrical problem that could cause the rear turn signals to flash as hazard lights.
Air Bag Sensors
In 2006, a recall of certain 2005-2006 GMC Envoys equipped with aftermarket leather seat covers were recalled because of an electrical problem that can lead to malfunctioning of the passenger sensing system. The passenger side front air bag could be erroneously enabled or disabled by this defect, which could cause injury in the event of a crash.
Windshield Wipers
GMC recalled 581,394 2002-2003 GMC Envoy and Envoy XL vehicles in 2004 for electrical problems that could cause the windshield wipers to fail or short circuit. If a short circuit occurs, the components within the module may corrode. Either condition puts the driver at risk, especially during inclement weather.
Saturday, December 7, 2013
Toyota Previa Electrical Problems
Electrical problems in the 1991 Toyota Previa could cause a fire. After multiple consumer complaints to the National Highway Traffic Safety Administration (NHTSA) of compartment fires caused by a short circuit in the cars radio/tape deck, Toyota issued a recall in September 1993.
Consumer Complaints
Consumer complaints on the NHTSA website indicate that multiple 1991 Toyota Previa owners experienced fires, some of which totaled their vehicles, due to electrical problems. Many of the reported fires occurred overnight, while the vehicles were parked.
Recall
On September 9, 1993, Toyota notified NHTSA that they would be recalling 1991 Previa and Camry vehicles due to a manufacturing problem in the cars radio/tape deck unit. A wiring problem in the affected Toyotas could cause a short circuit and ultimately lead to a fire.
Repair
Owners of vehicles affected by the recall should have been notified by Toyota and instructed to bring the Previas in for free repair of the radio. Consumer reports to NHTSA indicate that multiple fires occurred due to this issue years after the recall. Several claim they were never notified. Previa owners experiencing wiring problems can contact NHTSA or Toyota with their VIN numbers to determine if their car could be affected.
Saturday, November 16, 2013
How to Troubleshoot Electrical in a 1992 Ford Explorer
The 1992 Ford Explorer has an electrical system which consist of a power generating device, power distribution conductors, a power storage device, safety fuses and the various loads or devices that are powered by 12 volts DC electrical current. Electrical problems are one of the most common problems with cars. Knowing how to troubleshoot electrical problems with the 1992 Ford Explorer is a valuable skill and can provide significant cost savings as well.
Instructions
- 1
Start the Ford Explorer engine and listen to the sound generated by the engine. A slow cranking engine or an engine that wont crank is indicative of a problem with the car battery or starter motor.
2Turn on the radio and listen to its sound. Press the horn button and listen to the intensity of the sound coming from the horn. Turn on the windshield wipers and then switch the wipers off after a few turns. Any noticeable decline in the performance of the above devices, or their failure to operate, indicates a problem with the battery or alternator, or a blown fuse.
3Set the dial of the multimeter to 12 volts DC range. Place the tip of the red multimeter probe on top of the batterys positive (red) terminal. Place the tip of the black probe on top of the black (negative) terminal, and look at the multimeter. The multimeter should give a reading of 12.5 to 12.8 volts with the engine off. A lower reading indicates the battery has low charge and needs recharging.
4Start the car engine and keep the engine idling. Hold the probes of the multimeter on each hand, and place the tip of the red probe on the batterys red (positive) terminal. Touch the tip of the black (negative) terminal with the black probe, and look at the multimeter. A multimeter reading of 13.6 to 14.3 volts is indicative of an alternator that is charging the battery sufficiently. A lower reading is indicative of a defective alternator.
5Read the owners manual of the 1992 Explorer to know the ampere rating of its alternator. Ask a helper to step on the accelerator gently and increase the vehicles idle speed to 1,200 RPM. Hold the probes of the multimeter on each hand, and place the tip of the red probe on the batterys red (positive) terminal. Touch the tip of the black (negative) terminal with the black probe, and look at the multimeter. The multimeter should display a reading equivalent to the ampere rating stated in the Explorers owners manual. Have the alternator repaired in case the multimeter displays a different figure.
6Open the hood of the car, turn off the engine, and inspect the battery terminals. Look for corrosion or a build-up of white substance on each terminal. Corrosion or acid build-up on the terminals will cause poor contact between the terminal and the battery cable, thus preventing power from running from the battery to the various electrical devices including the starter. Clean the battery terminals to ensure the battery operates properly.
7Read the vehicle owners manual to know the location of the fuse box. The Explorers fuse box is typically found under the hood or under the dash. On the lid of the fuse box note the diagram that indicates the fuse position of each particular circuit. In case a particular device is not working, locate the position of the fuse inside the fuse box by reading the labels in the diagram. Replace the fuse with one of equal amperage If the wire in the fuse is broken or appears blackened.