Showing posts with label beetle. Show all posts
Showing posts with label beetle. Show all posts

Tuesday, April 1, 2014

How to Replace a Headlight Bulb in an 06 VW New Beetle

How to Replace a Headlight Bulb in an 06 VW New Beetle

Headlight maintenance is an important part of driver safety, and failure to keep the headlights of a vehicle in working order may result in serious injury to the driver. However, replacing a headlight is usually simple. This is especially true for a 2006 VW Beetle.

Instructions

    1

    Open the hood.

    2

    Loosen the plastic housing surrounding the headlights by pushing back on the black lever above the headlights.

    3

    Remove the plastic housing.

    4

    Disconnect the electrical connector by clicking the tabs together and pulling it out gently.

    5

    Remove the headlamp unit from the vehicle.

    6

    Remove the black plastic tab on the back of the headlamp unit by pulling on it.

    7

    Remove the side clips on the headlamp unit and remove the wire clip securing the headlight bulb into place.

    8

    Pull the burned out bulb from the headlamp unit. Use a paper towel to install the replacement bulb by pushing it into the headlamp unit.

    9

    Reattach the wire clips and the side clips.

    10

    Lock the black plastic tab onto the back of the headlamp unit.

    11

    Reconnect the electrical connector by plugging it into the headlamp unit.

    12

    Place the unit back into the vehicle and reattach the plastic housing. Close the vehicles hood.

Read More.. >

Sunday, October 6, 2013

How to Reset the Engine Light on a 2001 VW Beetle

How to Reset the Engine Light on a 2001 VW Beetle

VW Beetles made after 1996 come standard with an On-Board Diagnostic Second Edition computer (OBD II). There are sensors positioned throughout the vehicle that monitor all the vital functions of the car and report back to the main computer in the form of trouble codes. If the check engine light wont turn off on your New Beetle, it is because it has not been reset or the problem that triggered the check engine light has not yet been fixed. Best thing to do is to buy or borrow a diagnostic code scanner, use it to read the trouble codes, look up what the trouble codes mean in a repair manual, have the Beetle repaired, then use the diagnostic code scanner to turn off the check engine light.

Instructions

    1

    Find the diagnostic port located under the dashboard and under the heating controls. Plug the connector end of the diagnostic code scanner into this port. Dont push it in too forcefully; just turn it until it fits. If you force it, you may bend the pins inside the plug.

    2

    Put the key into the ignition and turn it to "Run," but dont start the engine. This will power on the diagnostic code scanner.

    3

    Press "Scan for Trouble Codes" on the scanner. Wait for the scanner to do its work. When it has finished, press "Clear All Trouble Codes." Turn off the vehicle and disconnect the diagnostic code scanner. Wait a minute or two.

    4

    Turn on the engine and examine the instrument panel to make sure the check engine light has turned off. If it has not, the problem that triggered the light remains and needs to be fixed.

Read More.. >

Sunday, September 22, 2013

How to Restore a VW Beetle

How to Restore a VW Beetle

The Volkswagen Beetle is one of the most beloved cars in history with movies, traditions and games stemming from the small, economic German-made car. Perhaps best recognized because of the movie "Herbie," VW Beetles are easy to distinguish from other cars and are likely the most recognized model the German car maker ever made. VWs are known for their durability and long life, in addition to their compact size, but like other cars, get worn out over time and may need to be restored.

Instructions

    1

    Assess your VW Beetle to determine what will need to be restored. The level and methods of restoration will differ depending on the condition of your Beetle.

    2

    Start with the frame. Get underneath the car and figure out what kind of shape the frame of the car is in. Repair as needed, if possible, or scavenge for a new frame at a junkyard if its beyond repair.

    3

    Move up to the engine. If youre not overly mechanically inclined, consider taking the Beetle into a mechanic to have the engine looked over, repaired, cleaned and filters changed.

    4

    Restore the interior of your Beetle. Depending on the condition of your car, this may include several different processes. The upholstery may need redone. If so, there are companies that specialize in reupholstering vehicles or you can do it yourself by using a sewing machine, stretching pliers and hog ring pliers. Replace the dash, steering wheel or other interior items that need replaced.

    5

    Restore the exterior of your vehicle by either taking it to a professional or by doing it yourself. If you chose to do it yourself, sand the surface down with an electric sander and sand paper. Prime the beetle with primer and then sand it down again. Apply a coat of paint and let it dry. Apply additional coats of paint until the metal is completely covered and the shade is to your liking. Finish with a gloss coat to protect the paint and add depth to its appearance.

Read More.. >