Showing posts with label rebuild. Show all posts
Showing posts with label rebuild. Show all posts

Monday, March 24, 2014

How to Rebuild the EMPI in a Carburetor

The carburetor on a vehicle is used for the internal combustion inside the engine. This works by mixing the fuel with air to create the combustion that propels the engine while driving. A European Motor Parts Incorporated carburetor kit allows you to replace any worn or leaking parts in your carb. These kits can be used with everything from a VW Beetle to a 78 Chevy. If you would like to rebuild your carburetor with an EMPI kit, you can do it with little hassle. You dont have to be an auto mechanic to rebuild your carburetor; you can do it yourself even if you have minimal knowledge of the task.

Instructions

    1

    Buy an EMPI carburetor kit. This can be found at local auto parts stores or through an online outlet. EMPI kits come with all of the rubber seals and gaskets that you need to rebuild your carb.

    2

    Put on safety glasses and gloves to keep grease and dirt off of your hands and out of your eyes. Remove the carburetor from your vehicle. Consult your service manual if you do not know how to remove the unit, as the process can vary from car to car.

    3

    Look over the diagram that came with your EMPI kit. This diagram will vary depending on the carburetor kit specific to your vehicle. Use a ratchet to remove the accelerator pump from your carburetor. Remove the cover from your carb and then remove the choke linkages as well. All of these parts are labeled on the diagram that comes with your EMPI kit.

    4

    Use a stiff-bristled toothbrush and cleaner to remove all debris from the parts on your carburetor. Use the EMPI kit diagram to replace the broken parts on your carb. Put the carburetor back together and then reinstall the carburetor in your car.

Read More.. >

Friday, October 11, 2013

Reasons to Rebuild an Engine

Reasons to Rebuild an Engine

The engine is the heart of any vehicle and needs to be maintained to function properly. Unforeseen problems or lack of maintenance may be a cause for complete engine failure. When an engine ceases to perform as expected, it will either need to be rebuilt or replaced.

Economic Reasons for Rebuilding vs. Replacing an Engine

    In some cases it may be more economically advantageous to rebuild an engine over replacing it when the engine fails. Depending on the model of the engine, overhaul kits are available from local auto parts stores which include all the parts necessary to rebuild the engine. The owner will need to obtain pricing on a replacement engine versus an engine rebuild kit. Replacement engines can be more expensive to purchase, though the time needed to install a replacement engine is often shorter the time needed to rebuild an engine.

Catastrophic Failure

    Catastrophic failures in engines typically result from lack of maintenance. Running the engine out of oil will cause the pistons to seize, while a lack of anti-freeze will cause the engine to overheat and crack the cylinder head. In both cases, the engine will need to be rebuilt since the damage is extensive.

Lack of Power

    Piston rings consist of two oil rings and a compression ring. When the piston rings begin to wear, the engine begins to suffer from lack of power. In this case, the pistons will need to be removed and the rings replaced. Economically, the owner should consider a rebuild at this point because the engine is open and the major components that need to be accessed during an engine rebuild are already exposed.

Determining How Much to Spend

    For some engines, rebuild kits are available but for others individual parts will need to ordered. Rebuild kits consist of pistons, rod and main bearings, plus the relevant gaskets for the valve cover and oil pan. The owner will need to calculate the cost of the rebuild kit and the labor to perform the job versus a replacement engine and the labor to install it. If the rebuild kit and labor are over 50 percent of the cost and labor of a replacement engine, then the engine should be replaced.

Read More.. >

Sunday, September 22, 2013

How do I Rebuild a Duramax Injector

The Duramax engines are a series of diesel engines that General Motors has manufactured for its larger trucks since 2001. Several different versions of these engines exist, but they all have a displacement of 6.6 liters. Duramax engines use direct fuel injection, which does not require an electronic controller. The procedure for rebuilding the fuel injector is generally the same as for all vehicles with a Duramax engine.

Instructions

    1

    Open your hood. Disconnect the cables from the negative terminals of the batteries with a socket wrench. Detach the clips on the fuel lines to the fuel injectors, and disconnect the fuel lines from the injectors. Remove the fuel return lines from the fuel injectors. Plug the open fuel lines with plastic caps to prevent debris from entering the fuel lines.

    2

    Attach GM special tool J-29873 to a socket wrench, and use this assembly to turn the fuel injector counterclockwise. Make sure you grip the 30 mm hex portion of the fuel injector to avoid damage to the injector. Remove the fuel injector, and cover its ends with plastic caps.

    3

    Replace the gasket on the fuel injector with a new gasket. Install the new fuel injector to the fuel rail. Fasten the fuel injector into place by turning it clockwise with GM special tool J-29873 and a socket wrench.

    4

    Attach GM special tool J-29873 to a torque wrench, and torque the fuel injector to 50 foot-pounds. Remove the protective caps from the fuel lines, and connect the fuel lines to the fuel injector. Fasten the retaining nuts for the fuel lines, and tighten them to 20 foot-pounds with a torque wrench.

    5

    Connect the fuel return line to the fuel injector, and attach the clips to the fuel lines. Connect the cables to the negative terminals of the batteries with a socket wrench.

Read More.. >