Monday, February 10, 2014
Mechanical Injector Removal
When fuel injectors are clean, they can enhance the performance of your vehicles engine. On the other hand, even injectors with minor clogging can have just the opposite effect. Although you can clean a fuel injector while its on the vehicle, you may want to remove it for a more thorough cleaning.
Significance
Sometimes fuel injectors are so clogged that a simple on-car cleaning might not be enough to fix the problem. Also, some injector cleaners are strong enough to damage other parts during on-car cleaning, such as the fuel pump, which consists partly of rubber. The only alternative is to remove the fuel injectors so that you can have them cleaned professionally.
Removal
Removing the injectors from a vehicle requires special equipment that costs as much as $6,000. Some vehicle models require much more work than others to remove the injectors from the car. The average price you can expect to pay per injector is about $30 as of 2011.
Time Frame
Many auto shops have cleaning machines that are equipped with reverse-flush features that work well for flushing out injectors. Once the fuel injectors have successfully been removed from the vehicle, expect the cleaning to take a little over half an hour.
Wednesday, February 5, 2014
How to Change a 2003 Duramax Injector
A Duramax engine is an eight-cylinder diesel engine that General Motors has manufactured since 2001. It appears in heavy Chevrolet trucks, such as the Silverado 2500HD. The most common 2003 Duramax engine has a displacement of 6.6 liters with electronic fuel injection. The fuel injectors are on top of the engine and deliver fuel to the engine in the correct quantity and sequence. Each cylinder of the engine has its own fuel injector.
Instructions
- 1
Remove the cables from the negative terminals of both batteries with a socket wrench. This ensures that you dont inadvertently start the engine. Disconnect the lower valve cover. Detach the fuel line from the fuel injectors and remove the bracket from the fuel injector.
2Connect Special Tool J-29873 to the retainer bracket of the fuel injector. Attach a socket wrench to the special tool and pry the retainer bracket away from the fuel injector.
3Detach the fuel injector from the injection socket. Remove the copper washer from the injection socket if it is not attached to the injector. Apply assembly grease to the copper washer and place it back into the injection socket.
4Install the new fuel injector into the injection socket. Install the injector bracket and tighten its retainer bolt to 36 ft. pounds. with a torque wrench.
5Attach the fuel line to the fuel injector and tighten its retaining bolts to 108 in. lbs. with a torque wrench. Install the lower valve cover with a socket wrench. Connect the cables to the negative terminals of the batteries.
Thursday, December 5, 2013
How to Replace a Fuel Injector for a 1992 940 GL Volvo
The Volvo 900 series is a range of mid-size cars made by Volvo during the 1990s, and the 940 models were in production from 1991 to 1997. The 1992 940 GL had a four-cylinder 2.3-liter engine with electronic fuel injection. These fuel injectors deliver a precise ratio of fuel and air to the engine at high pressure. The fuel injectors on the 1992 Volvo 940 GL are on top of the engine and are accessible from the engine compartment.
Instructions
- 1
Remove the fuel pump relay under the dashboard and start the engine. Allow the engine to idle until it stalls to relieve the pressure in the fuel system. Turn the ignition off and replace the fuel pump relay.
2Disconnect the negative battery cable with a socket wrench to prevent the accidental discharge of fuel. Detach the fuel lines and electrical connectors from the fuel injection manifold. Remove the vacuum hose from the fuel pressure regulator. Disconnect the fuel pressure regulator from the bracket of the fuel rail with a socket wrench.
3Remove the retaining bolts for the fuel injection manifold with a socket wrench. Detach the fuel injection manifold and fuel injectors from the engine as an assembly. Secure the fuel injection manifold in place on a work bench and disconnect the fuel injectors from the manifold.
4Remove the O-rings from the fuel injectors and replace them if they show signs of wear. Apply a thin layer of petroleum jelly to the O-rings, and install them onto the new fuel injectors. Connect the fuel injector to the fuel injection manifold and install this assembly onto the engine. Tighten the retaining bolts for the fuel injection manifold with a socket wrench.
5Connect the fuel pressure regulator to the fuel rail bracket and attach the vacuum hose to the fuel pressure regulator with a socket wrench. Connect the fuel lines and electrical connectors to the fuel injection manifold. Connect the cable to negative terminal of the battery. Start the engine and check for fuel leaks.
Thursday, November 7, 2013
How a Mechanical Fuel Injector Operates
When a mechanical fuel injector operates properly, an engine can perform smoothly and powerfully. Problems with stalling and misfiring are likely a possibility when fuel injectors dont operate correctly. Several factors decide how a fuel injector operates.
Injector Operation
Mechanical fuel injectors are responsible for inserting pressurized fuel into a vehicles engine. The injectors have small nozzles through which the fuel is sprayed. Injectors are known to perform better than carburetors because of their ability to handle different types of fuel, and operate at high temperatures.
PCM Operation
The Powertrain Control Module is a computer within a fuel injection system. Fuel injectors will open only after receiving instructions from the PCM. An injector-driver allows the PCM to communicate directly with the fuel injectors.
Sensor Operation
A fuel injector system utilizes several sensors in order to operate properly; one of these is an airflow sensor. Airflow sensors can read the amount of air thats entering your vehicles engine. A throttle-position sensor is another type of sensor and can be used to determine engine and vehicle speed.
Sunday, September 22, 2013
How do I Rebuild a Duramax Injector
The Duramax engines are a series of diesel engines that General Motors has manufactured for its larger trucks since 2001. Several different versions of these engines exist, but they all have a displacement of 6.6 liters. Duramax engines use direct fuel injection, which does not require an electronic controller. The procedure for rebuilding the fuel injector is generally the same as for all vehicles with a Duramax engine.
Instructions
- 1
Open your hood. Disconnect the cables from the negative terminals of the batteries with a socket wrench. Detach the clips on the fuel lines to the fuel injectors, and disconnect the fuel lines from the injectors. Remove the fuel return lines from the fuel injectors. Plug the open fuel lines with plastic caps to prevent debris from entering the fuel lines.
2Attach GM special tool J-29873 to a socket wrench, and use this assembly to turn the fuel injector counterclockwise. Make sure you grip the 30 mm hex portion of the fuel injector to avoid damage to the injector. Remove the fuel injector, and cover its ends with plastic caps.
3Replace the gasket on the fuel injector with a new gasket. Install the new fuel injector to the fuel rail. Fasten the fuel injector into place by turning it clockwise with GM special tool J-29873 and a socket wrench.
4Attach GM special tool J-29873 to a torque wrench, and torque the fuel injector to 50 foot-pounds. Remove the protective caps from the fuel lines, and connect the fuel lines to the fuel injector. Fasten the retaining nuts for the fuel lines, and tighten them to 20 foot-pounds with a torque wrench.
5Connect the fuel return line to the fuel injector, and attach the clips to the fuel lines. Connect the cables to the negative terminals of the batteries with a socket wrench.