Showing posts with label plymouth. Show all posts
Showing posts with label plymouth. Show all posts

Monday, April 21, 2014

1992 Plymouth Neon Timing Belt Installation

Neon was first introduced in North America in the early 90s. It is a front-wheel drive compact car that was manufactured by Chrysler Corporations Plymouth and Dodge Brands. It was powered by an inline 4 cylinder 2.0L engine that had an output of 132 horsepower and 130 foot-pounds of torque. It is a small and reliable engine, but it still need periodic service if parts like the timing belt fail.

Instructions

    1

    Disconnect the negative cable of your battery before performing any maintenance work on your engine, to prevent electrical shock or accidental starting. Remove the nut from the negative post with a box-end wrench. Lift the cable from your battery, move it outside of the battery box and close the lid of the battery box.

    2

    Align the sprocket with the arrow on the oil pump housing and then set the crankshaft sprocket to the top dead center (TDC) position. Using a suitable wrench, move crankshaft to 1/2 notch before top dead center.

    3

    Place the camshaft timing marks by aligning the notches on sprockets. Install timing belt, starting at crankshaft, around water pump sprocket, idler pulley, camshaft pulleys and tensioner pulley. Move the crankshaft sprocket to TDC to take up belt slack.

    4

    Install belt tensioner to engine block but do not tighten fasteners. Using a suitable torque wrench on the tensioner pulley, torque the pulley to 28 foot-pounds. With torque being applied to the tensioner pulley, move the tensioner up against the tensioner pulley bracket and torque fasteners to 23 foot-pounds.

    5

    Pull the tensioner plunger pin. Pretension is proper when pin can be easily removed or installed. Rotate crankshaft two revolutions and inspect the alignment of the timing marks. If the alignment is improper, repeat the operation.

Read More.. >

Thursday, September 26, 2013

1999 Plymouth Breeze Torque Specifications for a Rear Hub Bearing

The Plymouth Breeze was a mid-sized automobile produced from 1996 to 2000 and offered with either a 2.0L or 2.4L engine. The vehicle sold well and is still a common sight on the road. If your 1999 Breeze has developed a high-pitch squeal emanating from the rear wheels, you should suspect that a bearing is worn. Proper installation of a wheel bearing requires that you tighten the attaching bolts or lock-nut to the proper torque.

Bearing Overview

    The rear suspension of a 1999 Plymouth Breeze uses standard shock absorbers. The rear wheels use sealed type wheel bearings, which are not serviceable. They are designed to last the life of the vehicle, but this is rarely the case. Often the bearings can be damaged, allowing dirt and water to enter. This causes the bearing to wear rapidly, requiring you to eventually replace the bearing.

Rear Wheel Bearing Description

    The rear wheel bearings are a combined unit. The five bolts that protrude from the hub flange support the brake drum and wheel and are what the wheel lug nuts attach to. The hub and bearing assembly is attached to the rear knuckle spindle and held on with a single lock nut. If you remove this lock nut for any reason you must replace it with a new one.

Checking the Bearings

    Jack up and support the rear of your Plymouth Breeze. Remove the rear wheels and brake drums. Inspect the bearings for grease. Slowly rotate the hubs, feeling for roughness, resistance or lateral movement, any of which may indicate that you need to change the hub/bearing assembly.

Rear Bearing Removal

    To remove the rear bearings, first jack up and support the rear of your Plymouth. Remove the rear wheels and brake drums. Use a flat-head screwdriver to pry off each metal hub dust cap. Use a socket wrench to remove the hub lock nuts. Pull the hub/bearing assemblies straight out of the spindles. When reassembling the bearing and hub assemblies, tighten the new lock nuts to 185 foot-pounds. Torque the wheel lug nuts to 95 foot-pounds.

Read More.. >