Tuesday, March 25, 2014
Where Is the MAF on a 1989 Mustang
Midway through the 1964 model year, Ford released the first of the "pony cars," the Mustang. The release of this vehicle prompted Chevrolet to follow suit in 1967 with the release of the Camaro. In the late-1980s the Mustang began using more electronic components to control the engine. One of these components is the mass air flow sensor, which is commonly called the MAF sensor.
Location
Both the 5.0-liter and the 2.3-liter Mustangs had the same location for the mass air flow sensor, about halfway between the air box and the engine on the air intake tube. It is a metal cylinder with a wiring harness plugging into it.
Tools
The mass air flow sensor attached to the air intake tube by a simple hose clamp. Depending on the style of hose clamp, either a ratchet and socket, flathead screwdriver or Phillips screwdriver will be all you need to replace it. To properly test a mass airflow sensor, use a digital volt/ohm meter.
Function
The mass air flow sensor works by using a hot ire sensing unit to measure the temperature of the air coming into the engine and a cold wire to sense the ambient temperature. The air passing over the heated wire causes it to cool. The mass air flow sensor then compares the temperature of the cold wire to the heated wire and sends that information to the vehicles computer. The computer uses that information to determine the air-to-fuel ratio in the combustion chamber.
Cleaning
On occasion the hot and cold wires are simply dirty and cannot take proper readings. When this occurs, you can clean the wires with parts cleaner to restore them to their proper operating condition. Use caution not to damage the wires though.
Testing
Check that the voltage getting to the mass air flow sensor is at least 10.5 volts. To test the sensor operation, you must check the voltage at the vehicles computer. The sensor should read approximately: .60 volts at idle, 1.10 volts at 20 mph, 1.70 volts at 40 mph and 2.10 volts at 60 mph.
Wednesday, February 12, 2014
Carbon Fiber Exhaust Tips for the Mustang S351
The Mustang S351 is part of the impressive line of models modified by Saleen, Incorporated, which specialize in providing ultra high-performance Mustangs for the general public. The modifications are a response to the huge number of performance cars coming from Europe and Asia, and enable the pony cars to run with the very best in the world.
Carbon Fiber Exhaust Tips
Besides the usual engine and suspension tuning, carbon fiber exhaust tips will not only make your S351 Mustang look cool, but also will keep your exhausts looking good even after many miles of spirited driving. Exhaust tips are meant only for show and will very rarely affect or improve engine performance. Carbon fiber exhaust tips might be considered expensive compared to chrome or stainless steel tips, but the use of carbon fiber ensures that the tip will never discolor or stain due to high temperatures and exhaust gas corrosion.
Kinds of Muffler Tips
There are a variety of muffler tips available for your S351 Mustang. The usual choice is chrome and provides beauty and luster to your setup. Chrome is both weather- and rust-resistant, and will last many years, provided that a modicum of care is applied to the material.
Stainless steel is also corrosion resistant and provides the same amount of visual impact as chrome. The difference is in the shine, as chrome is more sparkly compared to stainless steel.
Titanium exhaust tips are more expensive compared to stainless steel and chrome, but are extremely light and develop an attractive hue to their finish when used over time.
Carbon fiber exhaust tips are also expensive, but require almost zero maintenance.
Installing Carbon Fiber Exhaust Tips
The installation process will vary according to the type of carbon fiber exhaust tip that you purchase. There are designs that will need to be welded onto the muffler pipe itself, while others will come with a pipe clamp or screw-tight attachment. Follow the instructions as stated on the packaging of your exhaust tip.
Conclusion
There are a lot of exhaust tip designs that you can choose from. If you happen to have carbon fiber body panels installed on your Mustang S351, then carbon fiber exhaust tips will complete the overall look of your car. Remember that installing an expensive exhaust tip comes with added responsibilities. Never park your car in a dimly lit area because thieves will likely steal your precious titanium or carbon fiber exhaust tip.
Sunday, February 9, 2014
2002 Mustang Front Hub Torque Specs
First introduced in 1964, Mustang is one of the most successful Ford car models. The fourth generation of Ford Mustang is powered by various types of engines and featured sharper contours, larger wheel arches and new interior design.
Important Note
Suspension fasteners are important as they affect performance of the main components and systems of the suspension. Major service expenses can be expected if they fail. Only new parts with the same part number must be installed, if service or replacement is required. During reassembly, to ensure correct retention of these parts, only specified torque values must be used.
Torque Specification
Front wheel hub and bearing retainer nuts must be tightened using 258 foot-pounds of torque.
Part Replacement
The original equipment manufacturer (OEM) part number for the front hub and bearing is 1R3Z1104BA and the manufacturers recommended price is $145 (as of February 2011).
Thursday, November 28, 2013
86 Mustang Troubleshooting
The 1986 Ford Mustang is a fuel-injected, eight cylinder engine. It produces about 200 horsepower and is available with a four-speed automatic or five-speed manual transmission. Engines problems may occur with this older model Mustang that can keep the engine from properly starting and running.
Dead Battery
Check the battery if the 1986 Mustang wont start. An easy way of determining whether or not the battery is dead is by trying to put on the lights or turn the radio on. If both are unresponsive and the car wont start, check the battery connections, try jumpstarting the vehicle or replacing the battery.
Fuel Filter
Replace the fuel filter if the lights and radio are functioning but the vehicle still wont start. The fuel filter should be replaced every 50,000 miles. If not, the fuel filter can become clogged and prevent gas from entering fuel injectors.
Old/No Gas
If the car has not been run in more than a year, the problem may be old gasoline in the tank. To test, try running the engine with ether. Put the ether into the throttle body and see if the engine starts and continues running. If the engine continues running, the problem is not with the gas in the tank. As simple as it sounds, be sure there is gas in the tank. If not, add fresh fuel and try again.
Saturday, October 5, 2013
Mustang Injectors Facts
The fuel injector is a key component in the Mustang and the torque, horsepower and rpm performance all depend on a clean and proper functioning injector. The injector in the Mustang is available in a variety of different sizes.
Clogged System
Fuel injectors are capable of becoming clogged and interfere with the operation of your Mustang. This problem typically occurs in Mustangs that have superchargers or turbochargers or vehicles that have been extensively modified. These situations increase the flow of fuel through the injector, which over time causes the component to wear down more quickly.
Increases Performance
Mustang fuel injector models are differentiated by their flow rates in pounds per hour, such as 24 lbs., 42 lbs. and 80 lbs. Upgrading the model of your injector will increase the power potential of your engine. A larger-capacity Mustang injector pumps more fuel at a faster rate to your engine.
Replacing Your Fuel Injector
Mustang fuel injectors typically last between 15,000 to 30,000 miles before needing to be serviced by a mechanic. Servicing will determine whether the system should be cleaned or replaced with a new fuel injector.