Friday, June 6, 2014
How to Turn Off the Seat Belt Warning on a Toyota Camry
Newer Toyota Camrys are equipped with a bell that warns you to put on your seat belt before starting the car. Some people find it annoying and wish to turn off the chiming. There are instructions in the owners manual on how to do this. You dont need any special tools to turn off this seat belt warning and it will only take a few moments of your time.
Instructions
- 1
Put the key into the ignition and turn it to the on position, but do not start the engine.
2Look for a tiny knob on the instrument panel and press it to toggle between the odometer reading and the trip odometer reading. Keep pressing the knob until you see "ODO." Turn off the vehicle.
3Turn the ignition on but dont crank the engine. Pull the tiny knob out for 10 seconds. While still holding the knob out, put on your seat belt and keep holding the knob for another 5 seconds then release it. The instrument panel will now read "B off."
4Repeat the above procedure to turn the seat belt warning chime back on.
Monday, December 9, 2013
How to Reset an Airbags Warning Light
Usually the only time the airbags warning light turns on is when there has been an accident and the airbag has deployed. But sometimes the airbag light, also called the Supplemental Restraint System (SRS) light, goes on because the On-Board Diagnostics computer receives a trouble code from a sensor in the SRS. This is to alert you of a malfunction in the airbag system. In either case, you need to have the airbag system replaced before you reset the airbags warning light. Once you do that, it is an easy fix taking only a few moments of your time.
Instructions
- 1
Find the fuse panel cover in the foot well on the drivers side of the vehicle. Pull down on it to open it.
2Find a yellow connector inside the fuse panel. Pull out this connector. This is the airbag power connector, also called the SRS power connector.
3Insert one end of the paperclip into one terminal of the SRS power connector and insert the other end of the paperclip into the other terminal.
4Put the key into the ignition and turn on the vehicle, making sure you dont start the engine. The paperclip shorts out the SRS light, thus resetting and turning it off. Plug the SRS power connector back into the fuse panel. Put the cover back on the fuse panel and shut off the vehicle.
5Wait a couple of minutes, then turn the engine on. Look on the instrument panel to ensure that the SRS light has turned off. Turn off the engine and remove the keys from the vehicle.
Tuesday, October 8, 2013
How to Reset an Air Bag Warning Light
The airbag warning light illuminates in your vehicle when the supplemental restraint system, or SRS, malfunctions. When the light turns on, you need to immediately have the vehicle examined and repaired by a professional mechanic. Usually this requires replacement of the entire airbag unit. After it has been replaced, you can manually reset the SRS light yourself using a paperclip. No other special tools are required to do the job.
Instructions
- 1
Locate the fuse panel cover on the drivers side, on the lower part of the dashboard. Pull down on it from the top using your fingers.
2Find a yellow connector that is plugged in the panel. This is called the Supplemental Restraint System power connector.
3Remove the yellow connector from the fuse panel.
4Unfold and straighten out a paperclip and put one end into each of the SRS plug terminals.
5Put the key into the ignition and turn the vehicle to the "on" position. Make sure the engine doesnt start. This will jump the terminals, which will reset and turn off the SRS light.
6Put the power connector back into the fuse panel and close the fuse panel cover. Turn off the vehicle and wait about a minute.
7Turn on the engine. Look on the instrument cluster to verify that the SRS light is off.