Tuesday, May 20, 2014
What Is the Difference Between 5 7 Vortec Heads Regular 350 Heads
Engine technology is both a passion and an obsession for car engineers and car aficionados alike. This is due to the fact that the modern internal combustion engine is an imperfect design and could benefit from a few tweaks to squeeze out more power and efficiency from the system.
The Vortec line of cylinder heads was introduced by GM in 1988 as a V6 with a 4.3-liter displacement. This technology created a vortex or pressurized swirl of fuel and air mixture inside the combustion chamber that enables the engine to produce more power while still gaining a marginal amount of fuel efficiency.
Vortec Means Power
Vortec heads instantly added 55 or more horsepower to a regular 350 head with the same displacement. Automotive enthusiasts are quick to note that the 350 and the 5.7 Vortec are essentially the same engine with the same displacement. The 350 designation is the cubic inch measurement that also translates to 5.7 liters.
It is hard to tell the two cylinder heads apart when it comes to the physical aspect of the build, but there are major differences that make Vortec heads more powerful and efficient.
5.7 Vortec Heads and Regular 350 Heads
The intake port of the Vortec head is different and measures 160cc with a modified port that increases the flow velocity. The bowl area is wider around the guide compared with regular 350 heads.
The intake bolt pattern is different and utilizes an eight-bolt attachment. The bolt pattern and the number casting is the quickest way to differentiate a Vortec Head from a regular 350 head. The Vortec head is available in two casting numbers (10239906 and 12558062) that offer identical performance virtues. You can also check the casting mark on the end of the head and check for three triangular saw-tooth casting marks that indicate Vortec potency.
Vortec Intake Valve Seats and Combustion Chamber
The intake valve seat of the Vortec head has a three-angle grind straight from the factory and the combustion chamber design is a radical departure from former GM heads utilized in the market. The Vortec combustion chamber is a kidney-shaped design that promotes better combustion and will have the spark plug located near the center of the chamber.
The regular 350 head utilizes a 90 degree intake bolt angle while the Vortec makes do with a 72 degree bolt angle. Experienced mechanics are all too familiar with the lay out of a Vortex head as all the attachment bolts point straight up when the head is bolted to the engine.
Conclusion
The Vortec head is without a doubt engineered towards producing more power, torque and engine response while improving overall fuel economy. If you plan to change or modify the head of the 350 engine in your car, installing a Vortec head alone will yield positive effects in your quest for power and speed.
Wednesday, November 13, 2013
Differences Between Torque Wrenches
Automotive repairs often require exact settings when tightening fasteners to ensure that parts are properly fastened. The various bolts and fasteners used to assemble an automobile have different tensile strengths, and stresses produced by operation of the vehicle require these fasteners to accommodate these stresses without failing. To place the proper tension on a fastener without exceeding its tensile strength, different types of torque wrenches are used when tightening them.
Digital Torque Wrench
Digital torque wrenches use an electronic display to show the amount of torque applied with the wrench. These wrenches are usually switched between metric measurements and SAE measurements and are also easily set to display torque in either foot pound or inch pound increments. The displays on the wrenches are electrically powered and use either an LCD or LED display screen mounted on the handle to show torque numbers.
Clicker Torque Wrench
Clicker torque wrenches signal when the desired amount of torque is reached by emitting an audible click. These wrenches include a spring inside the handle that places a load on an internal lever. The amount of tension in the spring is adjusted by turning the sleeve on the bottom of the handle to the desired torque level indicated on the handle. When the proper amount of torque is applied, the force applied to the wrench overcomes the spring-loaded lever within the handle, causing it to emit an audible click as it releases. Because these wrenches use a spring to preload an internal lever, you reset them back to zero after each use because prolonged compression of the spring degrades the strength of the spring and reduces the wrenchs accuracy.
Beam Wrench
Beam torque wrenches are the most common type of torque wrench. They have a long pointer beam mounted parallel to the handle shaft. When torque is applied to a bolt, the handle shaft bends but the pointer beam remains straight. The end of the pointer beam then matches up to an indicator mounted to the handle shaft, which shows how much torque is applied. You must observe the indicator on these wrenches from a straight-on view to accurately read the torque readings.
Dial Indicator Torque Wrench
Dial indicator torque wrenches operate similarly to beam-style torque wrenches. Instead of having a separate pointer beam over an indicator mounted on the handle, the beam is enclosed within a housing and moves the indicator on a dial as torque is applied. The dial indicator is easier to read than the indicator on the beam wrench and some dial indicator wrenches include lights or buzzers to indicate when the desired torque setting is reached.
Saturday, October 12, 2013
What Is the Difference Between a D16Z6 a D16Y8 Head
The types of engines found in different cars from the same company can be different due to design changes and power differences. In some cases, these variations result in parts with slightly different capabilities that are interchangeable between one engine and another. For instance, with some Honda engines, the heads in the engine carry different part numbers with slightly different functions that can fit into more than one type of engine, such as the D16Z6 and the D16Y8 engine heads.
Compression
One of the biggest differences between the D16Z6 and the D16Y8 is the compression that each head creates within the engine. The compression has a direct impact on the performance of the vehicle. The D16Z6 has a slightly lower compression ratio of 9.2 to 1 versus the compression ratio of 9.6 to 1 in the D16Y8 head. This means that the D16Y8 head provides slightly better performance than the D16Z6, though the difference is not significant.
Power
Because of the increased compression ratio of the D16Y8 over the D16Z6, a vehicle operating with the D16Y8 heads will achieve a higher horsepower rating than one running with the D16Z6 heads. Just as with the compression rate, though, the difference is not significant, making the two parts easily interchangeable. The D16Y8 achieves a horsepower rating of 127, while the D16Z6 achieves a horsepower rating of just 125, which doesnt make much difference to an untrained driver.
Torque
The amount of torque an engine provides directly relates to the acceleration speed of which the vehicle is capable. The amount of torque provided by the D16Z6 and the D16Y8 head within a Honda engine also varies slightly, providing a difference in performance for your vehicle. The D16Y8 provides the engine with 111 foot pounds of torque, while the D16Z6 provides only 106 foot pounds of torque. Thus an engine using the D16Y8 can accelerate a little faster than one that uses D16Z6 heads.
Redline Rate
The rate at which the engine hits the red line, or the maximum revolutions per minute, can vary depending on if you use the D16Y8 or D16Z6 heads. The D16Y8 head redlines the engine around 6,900 rpm, while the D16Z6 redlines around 7,200 rpm. This means that the D16Y8 will hit its maximum rpm more quickly and thus will rev more frequently than using the D16Z6 heads. The torque and the RPMs are directly related. The higher the torque, the lower the rpm.