Showing posts with label difference. Show all posts
Showing posts with label difference. Show all posts

Tuesday, May 20, 2014

What Is the Difference Between 5 7 Vortec Heads Regular 350 Heads

What Is the Difference Between 5.7 Vortec Heads & Regular 350 Heads?

Engine technology is both a passion and an obsession for car engineers and car aficionados alike. This is due to the fact that the modern internal combustion engine is an imperfect design and could benefit from a few tweaks to squeeze out more power and efficiency from the system.



The Vortec line of cylinder heads was introduced by GM in 1988 as a V6 with a 4.3-liter displacement. This technology created a vortex or pressurized swirl of fuel and air mixture inside the combustion chamber that enables the engine to produce more power while still gaining a marginal amount of fuel efficiency.

Vortec Means Power

    Vortec heads instantly added 55 or more horsepower to a regular 350 head with the same displacement. Automotive enthusiasts are quick to note that the 350 and the 5.7 Vortec are essentially the same engine with the same displacement. The 350 designation is the cubic inch measurement that also translates to 5.7 liters.

    It is hard to tell the two cylinder heads apart when it comes to the physical aspect of the build, but there are major differences that make Vortec heads more powerful and efficient.

5.7 Vortec Heads and Regular 350 Heads

    The intake port of the Vortec head is different and measures 160cc with a modified port that increases the flow velocity. The bowl area is wider around the guide compared with regular 350 heads.

    The intake bolt pattern is different and utilizes an eight-bolt attachment. The bolt pattern and the number casting is the quickest way to differentiate a Vortec Head from a regular 350 head. The Vortec head is available in two casting numbers (10239906 and 12558062) that offer identical performance virtues. You can also check the casting mark on the end of the head and check for three triangular saw-tooth casting marks that indicate Vortec potency.

Vortec Intake Valve Seats and Combustion Chamber

    The intake valve seat of the Vortec head has a three-angle grind straight from the factory and the combustion chamber design is a radical departure from former GM heads utilized in the market. The Vortec combustion chamber is a kidney-shaped design that promotes better combustion and will have the spark plug located near the center of the chamber.

    The regular 350 head utilizes a 90 degree intake bolt angle while the Vortec makes do with a 72 degree bolt angle. Experienced mechanics are all too familiar with the lay out of a Vortex head as all the attachment bolts point straight up when the head is bolted to the engine.

Conclusion

    The Vortec head is without a doubt engineered towards producing more power, torque and engine response while improving overall fuel economy. If you plan to change or modify the head of the 350 engine in your car, installing a Vortec head alone will yield positive effects in your quest for power and speed.

Read More.. >

Saturday, October 12, 2013

What Is the Difference Between a D16Z6 a D16Y8 Head

What Is the Difference Between a D16Z6 & a D16Y8 Head?

The types of engines found in different cars from the same company can be different due to design changes and power differences. In some cases, these variations result in parts with slightly different capabilities that are interchangeable between one engine and another. For instance, with some Honda engines, the heads in the engine carry different part numbers with slightly different functions that can fit into more than one type of engine, such as the D16Z6 and the D16Y8 engine heads.

Compression

    One of the biggest differences between the D16Z6 and the D16Y8 is the compression that each head creates within the engine. The compression has a direct impact on the performance of the vehicle. The D16Z6 has a slightly lower compression ratio of 9.2 to 1 versus the compression ratio of 9.6 to 1 in the D16Y8 head. This means that the D16Y8 head provides slightly better performance than the D16Z6, though the difference is not significant.

Power

    Because of the increased compression ratio of the D16Y8 over the D16Z6, a vehicle operating with the D16Y8 heads will achieve a higher horsepower rating than one running with the D16Z6 heads. Just as with the compression rate, though, the difference is not significant, making the two parts easily interchangeable. The D16Y8 achieves a horsepower rating of 127, while the D16Z6 achieves a horsepower rating of just 125, which doesnt make much difference to an untrained driver.

Torque

    The amount of torque an engine provides directly relates to the acceleration speed of which the vehicle is capable. The amount of torque provided by the D16Z6 and the D16Y8 head within a Honda engine also varies slightly, providing a difference in performance for your vehicle. The D16Y8 provides the engine with 111 foot pounds of torque, while the D16Z6 provides only 106 foot pounds of torque. Thus an engine using the D16Y8 can accelerate a little faster than one that uses D16Z6 heads.

Redline Rate

    The rate at which the engine hits the red line, or the maximum revolutions per minute, can vary depending on if you use the D16Y8 or D16Z6 heads. The D16Y8 head redlines the engine around 6,900 rpm, while the D16Z6 redlines around 7,200 rpm. This means that the D16Y8 will hit its maximum rpm more quickly and thus will rev more frequently than using the D16Z6 heads. The torque and the RPMs are directly related. The higher the torque, the lower the rpm.

Read More.. >