Sunday, April 6, 2014
How Stuff Works An AC Compressor Automobile
The air conditioning (AC) system in a vehicle consists of several parts such as the AC evaporator, compressor and condenser. The AC compressor is one of, if not the, most important of these components, as a vehicles AC system would be virtually worthless without it. Having information on how an AC compressor works can be beneficial for automobile owners.
Function
Refrigerant in a vehicles air conditioning system is pressurized by the AC compressor. The compressor then pumps the rigerant so that it travels throughout the AC system.
Sensors
The sensors on automobiles with climate control systems can affect the way a compressor functions. An example of this would be vehicles equipped with pressure transducers. By keeping tabs on rigerant pressure, the transducer will turn the compressor off whenever these pressures get too high.
Oil
For a compressor to function correctly, the oil levels have to be precisely maintained. Having more oil than needed can prevent the AC system from cooling correctly. On the other hand, not enough oil in the compressor could cause it to stop working altogether. By having the compressor flushed to remove all the oil, the correct levels can then be added back according to your vehicles specifications.
Saturday, January 25, 2014
How to Change the AC Belt on a Silverado
The serpentine belt in the Chevy Silverado works hard. The serpentine belt that controls the air conditioner also controls the other accessories in your vehicle. It is called a serpentine belt because of the way it snakes around inside the engine. It should be inspected each time you change the oil. Look for cuts, cracks or glazing. If it makes noise, it should be replaced. (Reference 1)
Instructions
- 1
Study the belts routing. If there is no diagram under the hood that shows the routing, draw one yourself. If the new belt is placed on the wrong way it will cause problems. (Reference 2)
2Unload the tensioner pulley using a 3/8 inch extension and ratchet. Attach the ratchet to the tensioner bolt and turn it counterclockwise.
3Caully remove the belt by first releasing it from the tensioner, then side the tensioner back into place, and remove the belt from the other pulleys.
4Check and clean the tensioner pulley and all the other pulleys for possible wear, dirt, old rubber or oil. Clean the grooves in the pulleys with a wire brush or brake cleaner.
5Install the replacement belt around all the pulleys, except the tensioner pulley, erring to your notes to be certain you are installing it in the correct direction.
6Turn the tensioner pulley to the left with the 3/8 inch ratchet, and slip the belt over it. Restore the tensioner to its original position.
7Start the engine and run it for about two minutes to allow the belt to become completely seated.
Sunday, October 27, 2013
Common Car AC Problems
Losing the comfort of your vehicles air conditioner can be unpleasant. The AC compressor has safeguards and shut-offs that offer protection from low levels of lubricant and other potentially damaging conditions..
Refrigerant Problems
A lack of refrigerant in a vehicle is the most common problem with automobile air-conditioning systems. Leaks are often the cause for these low levels. Before it can be recharged, the system must first be checked for leaks which could occur due to a damaged hose or compressor.
Air and Moisture Problems
Air and moisture entering a vehicles AC system might cause ice to accumulate and cause blockage problems. A vacuum pump should be used to remove this moisture and air. A one-percent rise in the amount of air in the system will cause an ACs cooling abilities to decline.
Noise Problems
Noise problems coming from your compressor indicate that replacement might be imminent. Using the wrong type of lubricant on the compressor. might also cause noise problems.