Monday, May 5, 2014
How to Compare Automobile Warranties
Automobile warranties come in two forms -- express warranties and implied warranties. An express warranty is the type of written warranty that you receive from the dealer when you purchase a car. These types of warranties can be compared with one another.
Time Frame
Compare the length of the warranties. New cars can carry warranties that are as long as 10 years or 100,000 miles, while used cars can carry warranties as short as 15 days.
Features
Check to see what each warranty covers. Some warranties cover almost anything that can happen to a car, while others cover just a few components on the vehicle. Likewise, some warranties will cover all or most of the repair costs, while others will cover 15 percent or less.
Benefits
Calculate how much you will have to pay out of pocket for a typical expense and how much the warranty will pay for the expense. You can do this by taking the total cost of the expense and multiplying it by the percentage that the warranty does not cover. For example, if a warranty covers 75 percent of a $500 repair job, then your out-of-pocket expense will be 25 percent of the repair job or, in this case, $125 ($500 x 0.25 = $125).
Sunday, April 6, 2014
How Stuff Works An AC Compressor Automobile
The air conditioning (AC) system in a vehicle consists of several parts such as the AC evaporator, compressor and condenser. The AC compressor is one of, if not the, most important of these components, as a vehicles AC system would be virtually worthless without it. Having information on how an AC compressor works can be beneficial for automobile owners.
Function
Refrigerant in a vehicles air conditioning system is pressurized by the AC compressor. The compressor then pumps the rigerant so that it travels throughout the AC system.
Sensors
The sensors on automobiles with climate control systems can affect the way a compressor functions. An example of this would be vehicles equipped with pressure transducers. By keeping tabs on rigerant pressure, the transducer will turn the compressor off whenever these pressures get too high.
Oil
For a compressor to function correctly, the oil levels have to be precisely maintained. Having more oil than needed can prevent the AC system from cooling correctly. On the other hand, not enough oil in the compressor could cause it to stop working altogether. By having the compressor flushed to remove all the oil, the correct levels can then be added back according to your vehicles specifications.
Saturday, January 18, 2014
How to Repair Automobile Paint Scratches
Many vehicle owners dread paint scratches because they detract from a vehicles appearance. Scratches are caused by door dings in parking lots, flying rocks from passing vehicles, bumper scrapes and intentional acts of vandalism. Many scratches form when objects gouge a vehicles protective coating and base color. Exposure to the elements can eventually cause scratches to rust.
Repair automobile scratches promptly to restore a vehicles appearance and prevent structural damages. Although scratches are unavoidable, most of them are reparable with the right supplies.
Instructions
- 1
Mix two tablespoons of liquid dish detergent with one gallon of water in a plastic bucket. Wash the scraped area of the vehicle with the soapy solution, using a microfiber cloth. Remove all dirt and grime from the scratch and surrounding paint.
2Rinse the paint with water from a garden hose. Dry the paint thoroughly with a microfiber towel.
3Wipe shoe polish over the scratch, using a microfiber applicator pad. Use a color of shoe polish that contrasts with the color of the vehicles paint, to better visualize the scratch. Apply enough shoe polish to fill the scratch.
4Place ultra-fine 2,000-grit wet/dry sandpaper on a rubber sanding block. Fill a bowl with cold water and two drops of liquid dish detergent. Dip the sandpaper into the solution.
5Sand the scratch with the sandpaper, using short, slow strokes at a 60-degree angle to the scratch. Apply light pressure on the sandpaper, until the shoe polish dissipates. Frequently dip the sandpaper into the solution, keeping it wet at all times.
6Dry the sanded area thoroughly with a clean microfiber towel. Apply a generous amount of rubbing compound directly to the area. Buff the area, using an oscillating power buffer with a rubbing compound pad.
7Wipe off the haze from the area with a terry cloth towel. Apply swirl mark eliminator compound directly to the area.
8Remove the rubbing compound pad from the power buffer and replace it with a foam polishing compound pad. Buff the area with the power buffer and foam polishing compound pad to remove any remaining traces of the scratch.
9Wipe the area thoroughly with a terry cloth towel to remove any remaining compound residue. Buff the area with car wax, using a clean microfiber cloth. Apply the car wax according to the manufacturers directions on the products label.