Showing posts with label scratches. Show all posts
Showing posts with label scratches. Show all posts

Saturday, January 18, 2014

How to Repair Automobile Paint Scratches

How to Repair Automobile Paint Scratches

Many vehicle owners dread paint scratches because they detract from a vehicles appearance. Scratches are caused by door dings in parking lots, flying rocks from passing vehicles, bumper scrapes and intentional acts of vandalism. Many scratches form when objects gouge a vehicles protective coating and base color. Exposure to the elements can eventually cause scratches to rust.



Repair automobile scratches promptly to restore a vehicles appearance and prevent structural damages. Although scratches are unavoidable, most of them are reparable with the right supplies.

Instructions

    1

    Mix two tablespoons of liquid dish detergent with one gallon of water in a plastic bucket. Wash the scraped area of the vehicle with the soapy solution, using a microfiber cloth. Remove all dirt and grime from the scratch and surrounding paint.

    2

    Rinse the paint with water from a garden hose. Dry the paint thoroughly with a microfiber towel.

    3

    Wipe shoe polish over the scratch, using a microfiber applicator pad. Use a color of shoe polish that contrasts with the color of the vehicles paint, to better visualize the scratch. Apply enough shoe polish to fill the scratch.

    4

    Place ultra-fine 2,000-grit wet/dry sandpaper on a rubber sanding block. Fill a bowl with cold water and two drops of liquid dish detergent. Dip the sandpaper into the solution.

    5

    Sand the scratch with the sandpaper, using short, slow strokes at a 60-degree angle to the scratch. Apply light pressure on the sandpaper, until the shoe polish dissipates. Frequently dip the sandpaper into the solution, keeping it wet at all times.

    6

    Dry the sanded area thoroughly with a clean microfiber towel. Apply a generous amount of rubbing compound directly to the area. Buff the area, using an oscillating power buffer with a rubbing compound pad.

    7

    Wipe off the haze from the area with a terry cloth towel. Apply swirl mark eliminator compound directly to the area.

    8

    Remove the rubbing compound pad from the power buffer and replace it with a foam polishing compound pad. Buff the area with the power buffer and foam polishing compound pad to remove any remaining traces of the scratch.

    9

    Wipe the area thoroughly with a terry cloth towel to remove any remaining compound residue. Buff the area with car wax, using a clean microfiber cloth. Apply the car wax according to the manufacturers directions on the products label.

Read More.. >