Showing posts with label prix. Show all posts
Showing posts with label prix. Show all posts

Monday, April 7, 2014

How to Replace the Ignition on a 1999 Pontiac Grand Prix

The 1999 Pontiac Grand Prix (available as a two-door coupe or a four-door sedan) typically has a six-cylinder 3.8-liter engine. The purpose of the ignition module is to control the electrical current to the spark plugs. The ignition module in the 1999 Pontiac Grand Prix is on top of the engine. The procedure for replacing the ignition module is similar for all Pontiac Grand Prix models with a 3.8-liter engine made from 1997 to 2000.

Instructions

    1

    Disconnect the cable for the negative battery terminal with a socket wrench. This will reduce the risk of electrocution while replacing the ignition assembly.

    2

    Label the wires to the spark plugs with tape to facilitate the installation of the new ignition module. You must reconnect the spark plug wires to their correct locations on the ignition assembly. Disconnect the spark plug wires from the ignition coils.

    3

    Remove the mounting screws for the ignition coils with a socket wrench and disconnect the ignition coils from the ignition module. Remove the fasteners for the ignition module and disconnect it from the engine.

    4

    Install the ignition coils to the new ignition module and fasten the retaining screws for the ignition coil. Torque the retaining screws to 40 inch-lbs. with a torque wrench.

    5

    Connect the spark plug wires to the ignition coils according to the labels you made in step 2. Attach the cable to the negative battery terminal with a socket wrench.

Read More.. >

Wednesday, October 23, 2013

How to Replace a Headlight Bulb on a 2004 Grand Prix

How to Replace a Headlight Bulb on a 2004 Grand Prix

The 2004 Pontiac Grand Prix houses two headlight bulbs per drivers side and passenger side headlight assembly. The low beam bulbs are located on the fender side of the headlight assemblies and the high beam bulbs are on the grill side of the assemblies. Allow the bulbs look exactly alike, they require different automotive part numbers for low and high beam bulbs. Because of this, inspecting the position of the faulty headlight in the assembly and buying the correct bulb will make the repair that much easier.

Instructions

    1

    Park the Grand Prix on a flat surface, apply the parking brake and ensure both the engine and headlight switches are off.

    2

    Open the hood and approach the headlight assembly with the faulty headlight bulb.

    3

    Locate the headlight assembly retaining clip. Its behind the headlight assembly on top on the fender side. Lift the clip upward halfway to release the headlight assembly.

    4

    Pull the assembly out being careful not to scratch the paint on the fender or the lens of the assembly.

    5

    Reach behind the assembly and disconnect the wire connection and plug from the headlight bulb socket.

    6

    Turn the socket of the bulb counterclockwise 1/4-turn to remove the composite bulb from the assembly. Discard the bulb.

    7

    Install the replacement bulb into the assembly (handling the plastic socket part only -- oil in skin will damage the glass bulb of halogen bulbs because of the intense heat they burn at), but ensure the tabs of the socket end of the bulb are aligned with the notches in the assembly before turning it clockwise and locking the bulb into place.

    8

    Plug the wire connection back into the socket of the bulb before replacing the assembly back into place and pushing down on the retaining clip. Test the headlight bulb for operation before closing the hood.

Read More.. >