Showing posts with label identify. Show all posts
Showing posts with label identify. Show all posts

Tuesday, March 11, 2014

How to Identify GM Gen III Engines

How to Identify GM Gen III Engines

GM Generation III small block engines, also known as LS1s, made their debut in the 1997 Corvette. According to "Engine Builder" magazine, Generation IIIs replaced the LT1 series. They have a smaller block, are lighter in construction and generate more horsepower than LT1s. Identifying Generation III engines is similar to other GM engines; begin visually, then locate the engine block casting number to be thorough. Although the LS1 identifies the engine family, it actually consisted of the LS 1 through 7, the L89 and C33. Truck versions of the Generation III were called "Vortec."

Instructions

    1

    Determine if the year and make of the vehicle are possible Generation III candidates. According to LS1 Engine, Generation III engines were used in 1997 to 2004 Corvettes, 1998 to 2004 Camaro SS and Z28 models, 1998 to 2002 Pontiac Firebirds, the 2004 Pontiac GTO and numerous GM Truck, van and SUV applications.

    2

    Inspect the engine compartment. GM often put identifying decals and tags on the engine itself or in the compartment area. These may indicate the use of a Generation III engine. Also try to determine if the block is aluminum or cast-iron. According to "Hot Rod" magazine, most automobile LS1s were aluminum, while truck versions were cast-iron. Aluminum blocks will have a smooth finish as opposed to the rough grain of cast-iron.

    3

    Locate the casting number on the engine block. "Hot Rod" places it on the drivers side, just below the cylinder head. It is an eight-digit number.

    4

    Decode the casting number by comparing it to a casting number listing, similar to the one found on Fastnuf (see Resources). This listing will give the specifics of the engine in question when matched to the casting number.

Read More.. >

Saturday, March 8, 2014

How to Identify a Borg Warner Transmission

How to Identify a Borg Warner Transmission

Borg Warner started manufacturing the T5 transmission in 1982. Since its inception, the transmission has been placed into various vehicles, including Ford and General Motors models. The five-speed transmissions fall into two categories: world class and non-world class. The T5 is credited as the only American-made manual transmission to be in production for more than 20 years. The Borg Warner T-10 also is a popular transmission, and both have identifying marks.

Instructions

Finding the Identifiers

    1

    Locate the identification tag number. A quick way to confirm that your transmission is a Borg Warner and what vehicle it was designed for, is to locate the identification number stamped into the "metal tag bolted onto the tail housing," according to 5speeds.com. Once you have the identification number you can access one of the two Web listed in the Resources section of this article to find out more information about the transmission. This listing can tell you what transmission you have and what vehicle it was originally designed for.

    2

    Look at the forward shaft bearing/support. Borg Warner transmissions usually a sticker saying Timken with a part number or a yellow and black sticker that says "use Dexron II only," according to British V8 Newsletter. These stickers are most commonly found on Borg Warner transmissions.

    3

    Count the number of bolts on the transmission cover. On the Borg Warner T10 transmission there are nine bolts attaching the side cover. This is only found on the T10.

    4

    Look numbers on transmission housing. You may not need the entire number stamped on the metal tag to determine whether or not you have a Borg Warner transmission. Knowing what numbers mean Borg Warner might save you a trip to the computer. For example, on a Borg Warner T10, the identifiers T-10 and/or 13-04 should be imprinted on the transmission housing. On a T5, the identifier should begin with 13-52. The casing number on a Borg Warner T19 is 1309and the T18 casing number is 1301. Both the T18 and T19 are "top loaded heavy-duty 4-speed transmissions with [a] cast iron case and shift cover," according to motivegear.com.

Read More.. >

Tuesday, November 12, 2013

How to Identify S S Cycle Motors

How to Identify S&S Cycle Motors

S&S Cycles in Wisconsin makes carburetors, performance parts and entire V-Twin engine assemblies for Harley-Davidson and Harley-Davidson-like motorcycles like Big Dog and Ironhorse motorcycles. The engines cost about as much as Harley engines, but they are hand assembled, come with large displacements and have a long-established reputation for craftsmanship. Several very visible marks make them easy to recognize. S&S motors also have unique engine identification numbers which, because S&S manufactures fewer engines, are shorter than Harley engine identification numbers.

Instructions

    1

    Walk to the right side of the engine and look at the carburetor. S&S engines come equipped with S&S carburetors. These carburetors have a distinctive, polished-steel, tear-drop-shaped air cover that is stamped with "S&S."

    2

    Look at the cylinder heads. S&S engines come with cylinder heads stamped "S&S " on the right side of the engine. "S&S" is also stamped on the right side of the transmission cover.

    3

    Illuminate the left side of the motor with a flashlight and examine the federally mandated engine number on the left side of the crankcase at the base of the rear cylinder. Harley-Davidson engines have engine numbers comprised of four letters followed by six numbers. All S&S motors have seven- or eight-character engine codes that begin and end with an asterisk. A typical S&S engine code begins, after the asterisk, with a single letter followed by five digits.

Read More.. >