Showing posts with label hydraulic. Show all posts
Showing posts with label hydraulic. Show all posts

Monday, November 17, 2014

Fundamentals of Hydraulic Fluid Couplings

Mechanical devices that use high rotational force can harm power transmission systems when rotational speed changes rapidly. Heavy machinery often employs the use of hydraulic fluid couplings to prevent this. Hydraulic fluid couplings transmit rotational force between two separate axes and are commonly found in automobiles and large machinery.

How it Works

    Hydraulic fluid couplings transfer rotational force from a transmitting axis to a receiving axis. The coupling consists of two toroids -- doughnut-shaped objects -- in a sealed container of hydraulic fluid. One toroid is attached to the driving shaft and spins with the rotational force. The spinning toroid moves the hydraulic fluid around the receiving toroid. The movement of the fluid turns the receiving toroid and thus turns the connected shaft.

Efficiency

    Although fluid couplings use hydraulic fluid within their construction, the mechanism loses a portion of its force to friction and results in the creation of heat. No fluid coupling can run at 100 percent efficiency. Excessive heat production from poorly maintained couplings can result in damage to the coupling and surrounding systems.

Applications

    Fluid couplings are commonly used in the automobile industry to replace mechanical clutches. The coupling transfers the force from the engine to the transmission to move the vehicle. Torque converters, a type of fluid coupling with additional features, have replaced basic fluid couplings in automobiles. Hydraulic fluid couplings have also found use in marine machinery and heavy industry.

Read More.. >

Friday, June 6, 2014

How to Keep a Hydraulic Cylinder From Going In

How to Keep a Hydraulic Cylinder From Going In

Hydraulic cylinders are designed to extend and retract with pressure from hydraulic fluid. The hydraulic cylinders are much easier to work with because they connect to the power source with hydraulic hoses. Old style cranes used cables to operate. Today cranes, back hoes and other machines are hydraulically driven. Hydraulic cylinders are used on farm equipment. It is a hydraulic cylinder that raises and lowers the boom into the truck running along side a potato harvester. There are several reasons why you dont want a hydraulic cylinder to go in. One reason may be when transporting equipment on the road.

Instructions

    1

    Insert two On-Off ball valves, one in each line of the cylinder that you want to hold in the out position. Apply thread tape to the fitting of the ball valves when installing them. Use a wrench to tighten all the fittings to avoid any leaks.

    2

    Cycle the cylinder in and out several times before extending it to the length you want it at. The cycling is done by running the cylinder in and out, which will bleed any air that entered out of the cylinder and lines when you installed the ball valves.

    3

    Set the cylinder at the extended out length you desire and turn the levers 90-degrees to shut off both ball valves to prevent fluid movement in the cylinder. This method works well as long as the cylinder does not leak. If this method is not suitable for your situation, you have a different method to follow.

    4

    Measure the distance between the top of the cylinder rod and the cylinder housing. The cylinder rod is the chrome rod that goes in and out of the hydraulic cylinder.

    5

    Cut two pieces of angle iron the same length as the measurement of the cylinder rod. Place the angle pieces over the extended chrome cylinder rod and between the cylinder housing and end. Use the muffler clamps to clamp the angle on the top and bottom. The clamps hold the angle pieces in place so that the cylinder rod is prevented from going back in.

Read More.. >

Tuesday, April 15, 2014

Hydraulic Car Hoist Information

Hydraulic Car Hoist Information

Many auto repairs and services are more easily performed when mechanics have open access to the underneath portion of a vehicle. Hydraulic car hoists give a mechanic this access by allowing him to raise and lower vehicles.

Types

    Types of hydraulic car hoists include two-post surface-mounted hoists; these hoists lift vehicles using two arms that rise in synchronization. Another type is the low or mid-rise frame-engaging car hoist. This kind of hoist uses hydraulic power to lift vehicles short heights; it is mainly used for tire and wheel repairs.

Features

    Single button operation and fully automatic electronic locking systems are offered on many hydraulic car hoists. These features give a mechanic the ability to adjust the car hoists height, which increases the range of vehicles he can service.

Safety Tips

    Vehicles loaded onto hydraulic car hoists must have all their doors tightly shut. The vehicle is first raised a short distance; this ensures that the car is balanced, sturdy and secure. The hoist is then raised to its intended height.

Read More.. >

Friday, January 17, 2014

Hydraulic Torque Wrench Setup Instructions

A hydraulic torque wrench is an industrial torque wrench capable of tightening bolts accurately up to 150,000 foot-pounds of torque. Hydraulic torque wrenches are lightweight and portable devices; however, they require the use of a 10,000-psi pump. Setting up your hydraulic torque wrench is a relatively straightforward process that requires you to hook the pump up to the wrench head and set the necessary torque value using the air pressure of the pump.

Instructions

    1

    Connect a male 10,000-psi hydraulic pump hose from the female connection on the torque wrench to the female connection on the 10,000-psi pump.

    2

    Connect a female 10,000-psi hydraulic pump hose from the male connection on the torque wrench to the male connection on the 10,000-psi pump.

    3

    Twist the metal connectors on both ends of each hose clockwise until secure.

    4

    Connect the pump to an available power outlet if it is an electric pump or to an air-pressure source if it is an air-driven pump.

    5

    Locate the desired torque value on your torque conversion chart. Scroll over to determine the corresponding hydraulic pressure value that you must set on the pump.

    6

    Loosen the locking ring on the adjustable relief valve on the pump. Turn the thumbscrew clockwise to increase the amount of pressure the pump can contain or counterclockwise to decrease the amount of pressure the pump can contain.

    7

    Press and hold the "Advance" button on the pump remote control to fill the pump until the pump gauge reaches the desired pressure.

    8

    Tighten the locking ring on the adjustable relief valve once pressure is set to the desired level.

    9

    Connect the desired impact socket to the torque wrench head and insert the locking pinion into the socket.

    10

    Apply the torque wrench head to any bolt you wish to tighten, ensuring that the reaction arm (long portion of the torque wrench head) presses against an adjacent surface.

Read More.. >

Wednesday, December 11, 2013

How to Repair Hydraulic Bottle Jacks

How to Repair Hydraulic Bottle Jacks

Hydraulic bottle jacks are expensive to purchase and are an essential tool for every mechanic. When you need to lift a car, nothing else will do the job in the same way as will a bottle jack. When you have an issue with yours, it can be very frustrating since it often means the jack needs to be sent out for a costly repair. However, you may be able to fix a few of the common problems with your bottle jack yourself, without sending it out for repair.

Instructions

    1

    Compare the capacity of the jack to the weight of the vehicle you are lifting. The capacity of the jack is usually written either on the jack or on the documentation that came with it. The vehicle weight is usually on a plate on the drivers door pillar.

    2

    Extend the piston all the way by pumping it up or by opening the release valve and pulling it up. Watch the piston for binding and check it for dirt, grit or excess oil. There should only be a little oil on the piston. Once it is up, check the seal at the bottom to make sure it is not pinched or cut. If the seal needs to be replaced, it should only be done at an authorized repair facility.

    3

    Open the oil reservoir plug. This is the uppermost cap on the jack. The oil should be 1/4 inch below the opening. Top off the hydraulic fluid to get it there.

    4

    Bleed the jack. Open the release valve and pump the handle vigorously several times. Close the release valve, pump the jack to its full height and let it down again by opening the release valve. If the jack does not reach its full height, then repeat the process until it does. Wipe down the jack with a cloth before bleeding and examine it afterward for evidence of any leaks.

    5

    Lift the load using the jack. If the jack still will not lift, then the problem is likely to be the pump. Pump replacement procedures vary by jack and are best carried out at a certified repair facility.

Read More.. >

Friday, November 22, 2013

Hydraulic Measurement Tools

Hydraulics is an aspect of applied science and engineering that mainly deals with the mechanical properties of liquids. The liquid used in hydraulic systems is incompressible and mostly contains oil and water. This is the fluid that is used to transmit force. The hydraulic tools used for measuring hydraulic properties utilize the liquid as the powering medium. Hydraulics are widely used in the aircraft and automotive industries. There are several tools used to measure different mechanical properties of the hydraulic fluids.

Hydraulic Piezometer

    A hydraulic piezometer is designed to measure pore water pressures in fully or partially saturated soil and rock. The hydraulic piezometer has a tip which consists of a porous ceramic filter vessel. Twin hydraulic tubes to connect each of the tips to the remote reading terminal where the pressure will be read by use of a bourdon gauge. The instrument is made with non-corrosive materials. The hydraulic piezometer has the capability of measuring pressure change of up to 2000kPa.

Guelph Permeameter

    The Guelph Permeameter is a tool kit used to measure in-situ hydraulic conductivity. Hydraulic conductivity is the ability of a medium to transmit water. This tool provides accurate measurements of soil conductivity, soil sorptivity and matrix flux potential. One of the advantages of using the Guelph Permeameter is that it can be operated, assembled and transported with ease. Time taken to acquire soil hydraulic measurements depends on the soil type at a range of 15-75 centimeters below the soil surface. This kit consists of several other hydraulic measurement tools apart from the Permeameter. These tools include the preparation and clean-up tools, vacuum test hand pump, collapsible water container, a field tripod and a well auger.

Hydraulic Profiling tool

    The hydraulic profiling tool is used to evaluate the hydraulic properties of unconsolidated materials. It locates and defines the pathways used by contaminants as they move in the subsurface. It identifies target zones of remedial material, measures static water conditions across a site and selects well screen intervals. Incorporated into this tool is a sensitive transducer whose main role is to measure the response of pressure of the soil injection of water.

Read More.. >