Showing posts with label dash. Show all posts
Showing posts with label dash. Show all posts

Saturday, April 19, 2014

How to Remove the Dash From the 2001 Toyota Tacoma

How to Remove the Dash From the 2001 Toyota Tacoma

The Toyota Tacoma was first introduced by Toyota in 1995 as a compact pickup. The dashboard can crack and fade with age and sun damage and may need to be replaced. You can replace the dash yourself on your 01 Tacoma in your home garage using a few simple tools purchased from any hardware store. To save yourself some money, check with your local auto wrecking yard to see if they have any used 01 Toyota Tacoma dashboards in good condition.

Instructions

    1

    Open the ashtray and push down on the metal retainer as you slide it out to remove it from the dash.

    2

    Wedge a flat-head screwdriver under the bezel to pry it off. The bezel is the plastic piece that surrounds the instrument panel, the radio and the air conditioning controls.

    3

    Open the drivers and front passengers doors. Locate the screws on the sides of the dash and remove them with a Phillips head screwdriver.

    4

    Remove the bolts on the kick panels under the dash on the drivers side and passengers side.

    5

    Pry up the dash trim by wedging a flat-head screwdriver under it and working your way around it until the dash is pried up.

    6

    Pull the dash forward and unplug the electrical connections attached to it. Slide the dash out of the Tacoma through the drivers door or front passengers door.

Read More.. >

Friday, December 27, 2013

How to Mount a Dash Pad

Sunlight and constant temperature changes cause dashboards to become brittle and crack. The cracks ruin the interior of your vehicle and allow the underlayment to become brittle. This leads to a fine dust covering the contents of the vehicle. Replacing a dashboard requires disassembling the dash, and a replacement dash can cost hundreds of dollars. Installing a dash pad requires less labor and costs less than a replacement dashboard.

Instructions

    1

    Wipe the dash pad with a clean rag. Shake the paint can thoroughly for 30 to 60 seconds. Spray multiple light coats of plastic spray paint onto the surface of the dash pad. Allow the paint to cure for 24 hours before proceeding with the installation.

    2

    Set a tube of silicone adhesive into a bowl of hot water. Allow the silicone to soften while you prepare the dashboard for the dash pad.

    3

    Cut protruding material from the cracked dashboard with a razor knife. Even out rough spots by sanding the dashboard with 100-grit sandpaper. Spray an ammonia-based window cleaner onto the sanded dashboard. Wipe the cleaner from the dash with a clean rag.

    4

    Set the dash pad on top of the prepped dashboard. Trim the dash pad to fit the contours of the dashboard. Remove the dash pad from your vehicle.

    5

    Remove the silicone adhesive from the hot water. Apply a bead of silicone remover to the underside edges of the dash pad. Apply additional adhesive to the surface of the dashboard.

    6

    Press the dash pad onto the surface of the dashboard. Work from the center to the edges of the dash pad with a clean rag to spread the adhesive and remove wrinkles.

    7

    Allow the adhesive to cure for 24 hours to ensure proper adhesion between the dash pad and the dashboard.

Read More.. >

Friday, October 25, 2013

How to Remove a Camaro Dash

How to Remove a Camaro Dash

The Camaro is a muscle car made by General Motors under the Chevrolet brand. The Camaro hit the market in 1966 for the 1967 model year to compete directly against the Ford Mustang. The Camaro dashboard is known to warp, especially on the passenger side. Over time, as these cars age, the interior dashboard often cracks and fades. Because the Camaro is built in many sections for ease of part replacement, you can remove the dash by removing a series of screws in some hard-to-find places.

Instructions

    1

    Open the glove box and remove the three or four screws leading into the dash.

    2

    Lie on your back on the drivers side and look up under the steering column. Remove the two screws in the rear.

    3

    Remove the two screws near the radio.

    4

    Remove the molding around the radio.

    5

    Remove any other peripherals on the dash.

    6

    Shimmy the dash loose and pull it up, off and away from the body of the car.

Read More.. >