Thursday, March 27, 2014
How to Reset the Dodge Ram 3500 Computer
You can reset the computer on your Dodge Ram 3500 right from your home garage or driveway, saving yourself time and money. The Dodge is equipped with an on-board diagnostics computer that monitors all functions of the vehicle. Sensors positioned throughout the Dodge Ram 3500 send trouble codes to the computer when they sense a malfunction. The computer illuminates warning lights and service lights on the instrument panel to alert you to have the vehicle looked at and repaired by a qualified mechanic. Once the repairs have been made, you need to reset the computer to turn off the warning and service lights.
Instructions
- 1
Pop up the hood of your truck and hold it open with the rod. Locate the battery. On the batter is the negative battery cable clamp with a nut on it. Loosen the nut with an end wrench.
2Remove the negative cable clamp from the battery, taking care not to touch the positive side of the battery with it.
3Let the vehicle sit for 30 minutes. Put the negative cable clamp back onto the negative battery terminal and tighten the nut with the end wrench.
4Put the key into the ignition and turn over the engine. Examine the instrument panel to make sure all service and warning lights have shut off. If so, the computer has been reset.
Tuesday, February 18, 2014
How to Reset a Dodge 2002 Computer
A 2002 Dodge generates trouble codes and warning lights on the instrument panel. When these lights are illuminated, your vehicle may require servicing. Most mechanics or dealerships will reset the computer for you after the servicing or repair, but not all. If you have warning or service lights still turned on your dash, then you need to reset the computer yourself. It only takes a few moments of your time and requires no special tools.
Instructions
- 1
Locate the fuse panel cover under the steering column. Pull down on it from the top using your fingers.
2Look for the Electronic Control Unit fuse (ECU) on the fuse diagram, which can be found on the fuse panel cover. Also find the fuse pullers inside the panel.
3Use the fuse pullers to remove the Electronic Control Unit fuse.
4Put the key into the ignition and turn the vehicle on, but dont start the engine.
5Wait five minutes and then put the ECU fuse back in place. The warning and service lights will flash several times on the instrument panel and then turn off. The computer is now reset.
6Put the fuse pullers back in place, close up the fuse panel cover and turn off the vehicle.
Wednesday, October 30, 2013
How to Update the 2001 Chevrolet Silverado Computer Software
The 2001 Chevrolet Silverados onboard computer uses Chevrolets latest version of OBD-II software as of the 2001 model year. As Chevrolet engineers discover new ways to program the Silverado for heightened fuel efficiency and lowered emissions, Chevrolet makes software updates available to GM dealership service personnel. While it is possible to purchase a scan tool or laptop capable of performing the update, you can only download the update from General Motors servers with an operating license that only dealership service departments are allowed to purchase.
Instructions
- 1
Climb into the 2001 Chevrolet Silverado with the scan tool equipped with the latest software update download.
2Plug the scan tool or laptops datalink cable into the diagnostic reader port under the drivers side of the Silverados dashboard. The port looks like a printer cable port and is a perfect mate to the end of the datalink cable. Turn the ignition to the run position with the ignition key.
3Follow your specific scan tool or laptops directions for updating the Silverados OBD-II software. Perform the update per those directions.
4Disconnect the datalink cable by hand. Turn the Silverados ignition off and remove the ignition key.